DLA A-A-55536-1998 PIPES AND ELBOWS AIR CONDITIONING-HEATING [Superseded DLA MIL-P-551 E CANC NOTICE 1 DLA MIL-P-551 E (2) DLA MIL-P-551 E (1) DLA MIL-P-551 E DLA MIL-P-551 D DLA M.pdf

1、 A-A-5553b m 9018054 00033b 794 m 1 INCH-POUND I A-A-55536 30 OCTOBER 1998 SUPERSEDING 21 NOVEMBER 1988 MlL-P-55lE COMMERCIAL ITEM DESCRIPTION PIPES AND ELBOWS, AIR CONDITIONING-HEATING The General Services Administration has authorized the use of this Commercial Item Description (CID), for all fede

2、ral agencies. 1. SCOPE. This CID covers the general requirements for air conditioning and heating pipes and elbows. Pipes and elbows covered in this CID are intended for commerciaI/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identif

3、ication Number (PIN) as shown in the following example (See section 6). A-A-XxxXX I I CIU N umber Dashr (see table I) 3. SALIENT CHARACTERISTICS. 3.1 Desicin and construction. Pipes and elbows described by this CID shall be as specified in Table 1 Beneficial comments, recommendations, additions, del

4、etions, clarifications, etc. and any data which may improve this document should be sent to: Defense Supply Center Columbus, ATTN: DSCC-VAI, Columbus, Ohio 4321 6-5000. FSC 4520 Licensed by Information Handling ServicesA-A-5553b 9038054 0003370 406 Dash No. O01 002 003 004 005 006 A-A-5 5 5 36 Class

5、 Style Size (dia.) Dash No. Class Style Size (dia.) 1 2 4 007 2 2 4 7 008 7 8 O09 8 4 4 O1 o 4 4 7 o1 1 7 8 o1 2 R 3.2 m. The nominal size shall be as specified in Table 1. 3.3 Finish. The material finish shall be as specified in Table 1. 3.4 Marking. Pipes and elbows described by this CID shall be

6、marked with the manufacturers standard commercial PIN. Table 1. Dash numbers. NOTES: CLASS 1 - Oxidized, dark blue-black color CLASS 2 - Zinc coated or hot dipped galvanized STYLE 2 - Adjustable, 90 degrees to O degrees, and 180 degrees to 90 degrees STYLE 4 - Straight section (2 foot length) SIZE -

7、 Diameter, in inches 4. REGULATORY REQUIREMENTS 4.1 Recovered Materials. The offerorkontractor is encouraged to ise recovered materials to th ! maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 5. QUALITY ASSURANCE PROVISIONS 5.1 Product con

8、formance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof

9、 of such conformance. 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product to be provided under this CID. a. The company producing the item must have been producing a product meeting the requirements of this CID for at least 2 years. b.

10、 The company must have sold 1,000 units meeting the requirements of this CID in the commercial marketplace over the past 2 years. 6. PACKAGING 2 Licensed by Information Handling ServicesA-A-55536 m 9038054 0003373 342 m A-A-55536 4520-00-272-8659 I O01 6.1 Preservation. packina. and marking. Preserv

11、ation, packing, and marking shall be as specified in the contract or order. 2 I 4 I 1 7. NOTES 4520-00-272-8663 4520-00-277-8339 4520-00-273-1 244 4520-00-273-1 245 7.1 m. The PIN should be used for Government purposes to buy commercial products described by this CID. See Section 2 for PIN format ex

12、ample. 003 2 8 1 004 4 4 1 005 4 7 1 006 4 8 I 7.2 Orderina data. The contract or order should specify the following: 4520-277-8340 a. CID document number, revision, and CID PIN. b. Quality assurance provisions. c. Packaging requirements. 008 2 7 2 O09 2 8 2 o1 o 4 4 2 O1 1 4 7 2 7.3. Existina NSNs.

13、 See Table 2 for existing NSNs referenced to the CID dash numbers. Table 2. Existina NSNs. I NSN I CID DashNo. 1 Style I Size 1 Class I I 007 I 2 I 4 I 2 I 7.4. Government users. To acquire information on obtaining these pipes and elbows from the Government inventory system, contact Defense Supply C

14、enter, Columbus, ATTN: DSCC-CM, P.O. Box 3990, Columbus, OH 4321 6-5000, or telephone (61 4) 692-7884. MILITARY INTERESTS: Custodians: Army - GL Navy - YDI Air Force - 99 Review activity: Air Force - 84 CIVIL AGENCY COORDINATING GSA- FSS Preparing activity: DM - CC (Project 4520-041 2) 3 Licensed by Information Handling Services