DLA A-A-55606 A-2013 ANCHOR GUY AND RODS ANCHOR.pdf

1、AMSC N/A FSC 4030 INCH-POUND A-A-55606A 9 December 2013 SUPERSEDING A-A-55606 21 August 1995 COMMERCIAL ITEM DESCRIPTION ANCHOR, GUY, AND RODS, ANCHOR The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial it

2、em description (CID) covers the general requirements for anchor, guy, and rods, anchor. Anchor, guy, and rods, anchor covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which is include

3、d in the PIN as shown in the following example (see 7.1). AA55606 - J - H - 3 CID Rod Length Eye number diameter code strands code code (See tables I, II or III IV or V) (See tables IV or VI or VII) (See tables VI or VII) Beneficial comments, recommendations, additions, deletions, clarifications, et

4、c., and any data that may improve this document should be sent to: DLA Land and Maritime, ATTN: VAI, P.O. Box 3990, Columbus OH 432183990, or email fluidflow.dla.mil. Since contact information can change you may want to verify the currency of the address information using the ASSIST Online database

5、at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55606A 2 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Anchor, guy, and rods, anchor supplied to this CID shall be as specified herein. 3.2 Material. T

6、he material shall be UNS G10350 steel in accordance with ASTM A29/A29M. 3.3 Finish. Guy anchors and anchor rods shall be hot-dip galvanized in accordance with ASTM A153/A153M. 3.4 Threads. Anchor rod threads shall be as specified in FED-STD-H28/2. Rods for plate anchors shall be threaded to a minimu

7、m of 3.5 inches. Rods with separate eyes shall be threaded to a minimum of 1.5 inches. 3.5 Nut. A nut shall be included with each rod anchors from table 6. 3.5.1 Nut and Bolt. A high strength nut and bolt shall be included with each extension and guy adapter from Table 7. 3.6 Dimensions. Dimensions

8、shall be as described in tables I, II, III, IV, V, VI, and VII. TABLE I. Plate anchors. Part code Hole size Rod diameter Anchor Area Plate Type 1A 1B 1C 1D 6 8 10 12 5/8 5/8, 3/4 3/4, 1 1, 1-1/4 70 135 200 300 Expanding Plate 1E 1F 1G 16 20 24 5/8, 3/4 5/8, 3/4, 1 5/8, 3/4, 1, 1-1/4 150 250 400 Cros

9、s Plate TABLE II. Screw anchors, no wrench, triple strand eye. Part Code Helix Diameter Rod Diameter Torque Capacity Rod Length 2A 2B 4 6 3/4 3/4 400 400 54 66 2C 8 1 1000 66 2D 2E 2F 10 10 14 1-1/4 1-1/4 1-1/4 2300 2300 2300 66 96 96 Provided by IHSNot for ResaleNo reproduction or networking permit

10、ted without license from IHS-,-,-A-A-55606A 3 TABLE III. Screw anchors, power installed, square core. Part Code Helix Diameter Rod Diameter Torque Capacity Core Size 3A 3B 3C 8 10 12 5/8, 3/4, 1 5/8, 3/4, 1 3/4, 1 5000 1-3/8 3D 3E 3F 3G 8 10 12 14 5/8, 3/4, 1 5/8, 3/4, 1 5/8, 3/4, 1 3/4, 1 6000 3H 3

11、J 8 10 3/4, 1 7000 1-1/2 3K 3L 3M 3N 8 10 12 14 3/4, 1 10000 TABLE IV. Screw anchors, power installed, multiple helix. Part Code Helix Combinations Length Rod Diameter Torque Capacity 4A 4B 8, 10 8, 10, 12 84 1-1/4 Round 2300 4C 4D 8, 10 10, 12 60 1-1/2 Square 5500 4E 4F 8, 10, 12 10, 12, 14 84 4G 1

12、0, 12, 14 120 TABLE V. Rock anchors, split wedge, triple strand eye. Part Code Hole Size Rod Diameter Rod Length 5A 1-3/4 3/4 15, 30, 53, 72, 84, 96 5B 2-1/4 1 TABLE VI. Anchor rods. Part Code Diameter Combinations Length Eye Strands Style 6A 6B 6C 6D 6E 1/2 5/8 3/4 1 1-1/4 60, 72, 84 60, 72, 84, 96

13、 84, 96, 108 96, 120 120 Single Single, Double Single, Double, Triple Single, Double, Triple Triple Forged Eye, for Plate Anchors 6F 6G 6H 5/8 3/4 1 42, 84 Single, Double, Triple Separate Eyenut, for Anchors from Table 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without li

14、cense from IHS-,-,-A-A-55606A 4 TABLE VII. Extension and guy adapters. 1/ Part Code Type Length Eye Strands 7A Extension with bolt 42, 60, 84, 120 N/A 7B Adapter with bolt 18 Single, Double, Triple 1/ For use with anchors from table 4 3.7 Marking. Anchor, guy, and rods, anchor supplied to this CID s

15、hall be marked with the manufacturers (MFRs) standard commercial PIN. (NOTE: The part number marked on the unit pack shall be the CID PIN.) 3.8 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum ext

16、ent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. Anchor, guy, and rods, anchor shall be processed in such a manner as to be uniform in quality and shall be free from other defects that will

17、 affect life, serviceability, or appearance. 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformanc

18、e. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of suc

19、h conformance. 5.2 Certification. Certification must be done with the procuring activity approval. The contractor shall certify that the product offered meets the salient characteristics of the description and conforms to the producers own drawings, specifications, standards, and quality assurance p

20、ractices, and is the same as the product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract 6. PACKAGING. Preservation, pac

21、king, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Environmentally preferable material. Environmentally preferable materials should be us

22、ed to the maximum extent possible to meet the requirements of this specification. As of the dating of this document, the U.S. Environmental Protection Agency (EPA) is focusing efforts on reducing 31 priority chemicals. The list of chemicals and additional information is available on their website ht

23、tp:/www.epa.gov/osw/hazard/wastemin/priority.htm. Included in the EPA list of 31 priority chemicals are cadmium, lead, and mercury. Use of these materials should be minimized or eliminated unless needed to meet the requirements specified herein (see Section 3). 7.3 Commercial and Government Entity (

24、CAGE) code. For ordering purposes, inventory control, and submission of these anchor, guy, and rods, anchor to DLA Land and Maritime under the Parts Management Advisory Team (PMAT), CAGE code 58536 should be used d. Provided by IHSNot for ResaleNo reproduction or networking permitted without license

25、 from IHS-,-,-A-A-55606A 5 7.4 Source of documents. DEPARTMENT OF DEFENSE SPECIFICATION FED-STD-H28/2 - Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms (Copies of these documents are available online at http:/quicksearch.dla.mil or from the S

26、tandardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) FEDERAL REGULATIONS FAR - Federal Acquisition Regulations (FAR) (Copies of these documents are available online at www.acquisition.gov/comp/far/index.html or from the U.S. Government Printing Office, 7

27、32 North Capital Street, NW, Washington D.C. 20401.) ASTM INTERNATIONAL ASTM A29/A29M - Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements ASTM A153/A153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware (Copies of these documents

28、 are available online at http:/www.astm.org or from the ASTM International, P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.) 7.5 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance provisions

29、. c. Packaging requirements. 7.6 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manufacturers were known to have commercial products that

30、 would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict acquisition to only the manufacturers shown.) MFRs CAGE MFRs name and address 08TX0 FOSS-BROWN INC 3411 Silverside Rd, suite 100WB Wilmington, DE 1981

31、0-4890 Tel: (484) 322-0633 foss-brownmike- 7.8 Government users. To acquire information on obtaining these anchor, guy, and rods, anchor from the Government inventory system, contact DLA Land and Maritime, ATTN. DLA Land and Maritime Call Center (NAB), P.O. Box 3990, Columbus, OH 432183990 or telep

32、hone (614) 692-2271 or (614) 692-3191. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55606A 6 7.8 Legacy. This commercial item description is a replacement for MIL-A-3777 for all federal agencies (ZZ-T-831 is canceled as of 30-APR-1993 and copi

33、es of these documents are available online at http:/quicksearch.dla.mil or from the U.S. Government Printing Office, 732 North Capital Street, NW, Washington D.C. 20401.) 7.9 Changes from previous issues. Marginal notations are not used in this revision to identify changes with respect to the previo

34、us issue due to the extensiveness of the changes MILITARY INTERESTS CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA - FSS Army - AT Navy - SH Preparing activity: Air Force - 99 DLA - CC DLA - CC Review activities: Project 4030-2014-001 Army-AR Navy SA,YD Air Force - 71 NOTE: The activities liste

35、d above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-