DLA A-A-59300-1998 INSULATION TAPE NONADHERING GLASS FABRIC POLYTETRAFLUOROETHYLENE COATED [Superseded DLA MIL-I-18746 B CANC NOTICE 2 DLA MIL-I-18746 B VALID NOTICE 1 DLA MIL-I-18.pdf

1、Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any datawhich may improve this document should be sent to: Defense Supply Center Richmond (DSCR),8000 Jefferson Davis Highway, Richmond, VA 23297-5610.AMSC N/A FSC 5970DISTRIBUTION STATEMENT A. Approved for public

2、release; distribution is unlimited.INCH-POUNDA-A-5930014 September 1998SUPERSEDINGMIL-I-18746B26 October 1971COMMERCIAL ITEM DESCRIPTIONINSULATION TAPE, NONADHERING, GLASS FABRIC,POLYTETRAFLUOROETHYLENE COATEDThe General Services Administration has authorized the use of this commercial item descript

3、ionfor all federal agencies.1. SCOPE. This commercial item description (CID) covers polytetrafluoroethylene-coated, glassfabric, non-adhering, insulation tape. The insulation tape described herein is intended for use inelectrical insulation at temperatures up to 260 C (500 F).2. SALIENT CHARACTERIST

4、ICS. The insulation tape shall not have adhesive backing.The base material used in the manufacture of the insulation tape shall be a woven glass fabric.The glass fabric shall be coated on both sides with polytetrafluoroethylene (see 6.4.1) resin.The polytetrafluoroethylene-resin coating shall penetr

5、ate and adhere to the fabric. Thepolytetrafluoroethylene-resin coating shall have a smooth surface, substantially free of wrinkles,creases, blisters, and other imperfections.2.1 Classification . The insulation tape shall be furnished in the thicknesses and widths, and withthe tolerances specified in

6、 tables I and II. The tape shall be furnished in 36-, 72-, or 100-yardrolls. A tolerance of 1 foot per 36 yards is allowable. The thickness and width to be furnishedshall be as specified (see 6.2).Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5

7、93002TABLE I. Thickness .Classification Nominal thickness (inch) Tolerance (inch)1 0.002 0.00052 0.003 0.00053 0.005 0.0014 0.007 0.0015 0.010 0.00156 0.012 0.00157 0.015 0.002TABLE II. Width .Classification Nominal width (inch) Tolerance (inch)A 1/2 1/32B 3/4 1/32C 1 1/32D 1-1/2 1/162.2 Breaking an

8、d dielectric strength . The breaking strength and dielectric strength for the variousthicknesses shall be as specified in table III.TABLE III. Mechanical and electrical properties .Thickness(inch)Breaking strength, minimum(pound per inch width)Dielectric strength, minimum(volts per mil)0.002 20 6000

9、.003 40 6000.005 70 5000.007 100 5000.010 150 4000.012 175 4000.015 200 4002.2.1 Dielectric strength after heating . After exposure to a temperature of 150 5 C (302 F) forat least 12 hours, the dielectric strength shall not be less than 80 percent of the value determinedprior to exposure.2.3 Workman

10、ship . The insulating tape shall be free of any defects affecting its appearance orserviceability. There shall be no visible overlap of tape edges or separation between layers.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5930033. REGULATORY RE

11、QUIREMENTS. The offeror/contractor is encouraged to use recoveredmaterials to the maximum extent practicable, in accordance with paragraph 23.403 of the FederalAcquisition Regulation (FAR). All finished products shall be new and unused and shall meet allthe same salient characteristics described in

12、herein.4. QUALITY ASSURANCE PROVISIONS4.1 Product conformance . The products provided shall meet the salient characteristics of thiscommercial item description, conform to the producers own drawings, specifications, standards,and quality assurance practices, and be the same product offered for sale

13、in the commercialmarket. The government reserves the right to require proof of such conformance.4.2 Market acceptability . Similar items must have been sold to the commercial market or to theGovernment.5. PACKAGING. Preservation, packing, and marking shall be as specified in the contract ororder.6.

14、NOTES6.1 Ordering data . Acquisition documents must specify the following:a. Title, number, and date of this CID.b. Tape thickness and wid th (see 2.1).6.2 Part identification number (PIN) . The following part identification numbering procedure isfor government purposes and does not constitute a req

15、uirement for the contractor:A-A-59300 -A-1Thickness: 1 0.002 in.2 0.003 in.3 0.005 in.4 0.007 in.5 0.010 in.6 0.012 in.7 0.015 in.Width: A 1/2 in.B 3/4 in.C 1 in.D 1-1/2 in.CID NumberProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5930046. 3 Refe

16、renced documents . Documents referenced in this CID may be obtained from thefollowing addresses:a. ASTM documents may be obtained from ASTM, 100 Barr Harbor Drive, WestConshohocken, PA 19428.b. Federal documents may be obtained from t he Superintendent of Documents, USGovernment Printing Office, Was

17、hington, DC 20402.6.4 Definitions .6.4.1 Polytetrafluoroethylene . A totally fluorinated polymer, developed by DuPont and soldunder the registered trademark Teflon . It has outstanding chemical resistance being unaffectedby almost all chemicals and also has a very high oxygen index (i.e., is inheren

18、tly non-flammable).It has a very low coefficient of friction and is stable to high temperatures.6.5 Recommended test methods . For information about test methods see ASTM D902-95,Standard Test Methods for Flexible Resin-coated Glass Fabrics and Glass Fabric TypesUsed for Electrical Insulation.6.6 Na

19、tional stock numbers (NSNs) . The following NSNs correspond to this CID. This list maynot be indicative of all possible NSNs associated with A-A-59300.NSNs5970-00-138-88255970-00-181-03065970-00-226-97225970-00-883-11615970-00-935-0098MILITARY INTERESTS:Custodians: Preparing Activity:Army - CR DLA - GSNavy - OSAir Force - 85 (Project 5970-1174)Reviewers:Army - MINavy - AS, EC, SHAir Force - 82, 99Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-