DLA A-A-59406-2004 INDUCTOR POWER SHIELDED SURFACE MOUNT《表面安装屏蔽功率型导体》.pdf

1、INCH-POUND A-A-59406 18 February 2004 COMMERCIAL ITEM DESCRIPTION INDUCTOR, POWER, SHIELDED, SURFACE MOUNT The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements for an inductor

2、. Inductors covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1). AA59406 - 001 CID number Dash number (see table I) 3. S

3、ALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Inductors supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrical characteristics. The electrical characteristics shall be as specified in table I. 3.3 Weight. The weight shall be no greater than 1.4 grams maxi

4、mum. 3.4 Operating temperature range. The operating temperature range is -40C to +85C. 3.5 Temperature rise. DC current rating for a 15C rise. 3.6 Altitude. The maximum altitude is 70,000 feet. 3.7 Marking. Inductors supplied to this CID shall be marked with the manufacturers standard commercial PIN

5、. Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-0557, or facsimile (FAX) (614

6、) 692-6939. AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59406 2 Dimension Inches mm Dimension Inches mm A B C D E .370 Max .510 Max .330 Dia .

7、200 Max .100 9.40 Max 12.95 Max 8.38 Dia 5.08 Max 2.54 F G H I J .300 .100 .115 .110 .290 7.62 2.54 2.92 2.79 7.37 NOTES: 1. Dimensions are in Inches. 2. Metric equivalents (in parenthesis) are listed for general information only. FIGURE 1. Configuration and dimensions. Provided by IHSNot for Resale

8、No reproduction or networking permitted without license from IHS-,-,-A-A-59406 3 TABLE I. Electrical characteristics. CID dash number AA59406- L 20% (H) DCR Max (Ohms) SRF typ (MHz) 001 1.0 .025 60 002 1.5 .030 55 003 2.2 .035 55 004 3.3 .040 50 005 4.7 .045 45 006 6.8 .050 40 007 10 .055 35 008 15

9、.060 25 009 22 .084 22 010 33 .090 18 011 47 .11 16 012 68 .15 12 013 100 .29 9 014 150 .36 8 015 220 .39 6 016 330 .73 5 017 470 .88 4 018 680 1.15 3 019 1000 1.45 2.5 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in a

10、ccordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance pr

11、actices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product to be provided under this CID: a. T

12、he company producing the item must have been producing a product meeting the requirements of this CID for at least 2 years. b. The company must have sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 6. PACKAGING. Preservation, packing, and marking shall be as spe

13、cified in the contract or order. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59406 4 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Commercia

14、l and Government Entity (CAGE) code. For ordering purposes, inventory control, and submission of these inductors to DSCC under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.3 Ordering data. The contract or order should specify the following:

15、a. CID document number, revision, and CID PIN. b. Product conformance provisions. c. Packaging requirements. 7.4 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation a

16、nd coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and

17、address 02113 Coilcraft Inc 1102 Silver Lake Road Cary, Illinois 60013-1658 Phone number (847) 639-2361 Uniform Resource Locator (URL): Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59406 5 7.5 Part number (P/N) supersession data. This CID sup

18、ersedes the following manufacturers P/Ns as shown. This information is being provided to assist in reducing proliferation in the government inventory system. TABLE II. P/N supersession data. CID dash number (see table I) AA59406- Vendor commercial PIN CAGE 02113 1/ 001 DT3316P-102 002 DT3316P-152 00

19、3 DT3316P-222 004 DT3316P-332 005 DT3316P-472 006 DT3316P-682 007 DT3316P-103 008 DT3316P-153 009 DT3316P-223 010 DT3316P-333 011 DT3316P-473 012 DT3316P-683 013 DT3316P-104 014 DT3316P-154 015 DT3316P-224 016 DT3316P-334 017 DT3316P-474 018 DT3316P-684 019 DT3316P-105 1/ The manufacturers P/N shall

20、 not be used for procurement to the requirements of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. 7.6 Government users. To acquire information on obtaining these inductors from the Government invento

21、ry system, contact Defense Supply Center, Columbus, ATTN: DSCC-CPAA, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-7741. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC Project 5950-1152 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-