DLA A-A-59416 A-2008 INDUCTOR CHIP FIXED HIGH SELF RESONANT FREQUENCY SURFACE MOUNT.pdf

1、Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43218-3990, or email (transformersdla.mil). Since contact Informat

2、ion can change you may want to verify the currency of the address information using the ASSIST Online database at http:/assist.daps.dla.mil . AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND A-A-59416A 9 May 2008 SUPERSEDING A-A-59416 18

3、February 2004 COMMERCIAL ITEM DESCRIPTION INDUCTOR, CHIP, FIXED, HIGH SELF RESONANT FREQUENCY, SURFACE MOUNT The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements for an induct

4、or. Inductors covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1). AA59416 - 001 K S CID number Dash number (see table I

5、) Inductance Tolerance (see table II) Termination finish (see table III) 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Inductors supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrical characteristics. The electrical characteristics shall be as specifi

6、ed in table I. 3.3 Weight. The weight shall be no greater than 0.5 gram maximum. 3.4 Operating temperature range. The operating temperature range is 40C to +125C. 3.5 Temperature rise. DC current rating for a 15C rise. 3.6 Altitude. The maximum altitude is 70,000 feet. 3.7 Marking. Inductors supplie

7、d to this CID shall be marked with the manufacturers standard commercial PIN. 3.8 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the o

8、perational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.9 Workmanship. Inductors shall be processed in such a manner as to be uniform in quality and shall be free from other defects that will affect life, serviceability, or appearance. * * * Provided by IH

9、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59416A 2 Dimension Inches mm A Max. B Max. C Max. D Ref. E F G H I J .071 .044 .040 .015 .030 .013 .034 .040 .025 .025 1.80 1.12 1.02 0.38 0.76 0.33 0.86 1.02 0.64 0.64 NOTES: 1. Dimensions are in Inches. 2. Metr

10、ic equivalents are listed for general information only. FIGURE 1. Configuration and dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59416A 3 TABLE I. Electrical characteristics. 900 MHz 1.7 GHz CID dash number AA59416- Inductance(nH)

11、Tolerance (%) Q Min L Typ Q Typ L Typ Q Typ SRF Min (MHz) DCR Max (OHMS) 1/ IDCMAX (mA) 001* 1.6 250 MHz 10, 5 24 1.67 49 1.65 63 12,500 0.030 700 002* 1.8 250 MHz 10, 5 16 1.63 35 1.66 50 12,500 0.045 700 003* 3.3 250 MHz 10, 5, 2 35 3.31 75 3.38 88 5900 0.045 700 004* 3.6 250 MHz 10, 5, 2 22 3.72

12、53 3.71 65 5900 0.063 700 005* 3.9 250 MHz 10, 5, 2 22 3.95 49 3.96 67 6900 0.080 700 006* 4.3 250 MHz 10, 5, 2 22 4.32 50 4.33 70 5900 0.063 700 007* 4.7 250 MHz 10, 5, 2 20 4.72 47 4.75 57 5800 0.116 700 008* 5.1 250 MHz 10, 5, 2 20 4.93 47 4.95 56 5700 0.140 700 009* 5.6 250 MHz 10, 5, 2 26 5.77

13、63 6.05 80 4760 0.075 700 010* 6.8 250 MHz 10, 5, 2 27 6.75 60 7.10 81 5800 0.110 700 011* 7.5 250 MHz 10, 5, 2 28 7.70 60 7.82 65 4800 0.106 700 012* 8.2 250 MHz 10, 5 30 8.25 82 8.37 87 4200 0.115 700 013* 8.7 250 MHz 5, 2 28 8.86 62 9.32 58 4600 0.109 700 014* 9.5 250 MHz 5, 2 28 9.7 59 9.92 61 5

14、400 0.135 700 015* 10 250 MHz 5, 2 31 10.0 66 10.6 83 4800 0.130 700 016* 11 250 MHz 5, 2 30 11.0 53 11.5 56 4000 0.086 700 017* 12 250 MHz 5, 2 35 12.3 72 13.5 83 4000 0.130 700 018* 15 250 MHz 5, 2 35 15.4 64 16.8 89 4000 0.170 700 019* 16 250 MHz 5, 2 34 6.2 55 17.3 52 3300 0.104 700 020* 18 250

15、MHz 5, 2 35 18.7 70 21.4 69 3100 0.170 700 021* 22 250 MHz 5, 2 38 22.8 73 26.1 71 3000 0.190 700 022* 23 250 MHz 5, 2 38 24.1 71 28.0 67 2850 0.190 700 023* 24 250 MHz 5, 2 36 24.5 45 28.7 39 2650 0.135 700 024* 27 250 MHz 5, 2 40 29.2 74 34.6 65 2800 0.220 600 025* 30 250 MHz 5, 2 37 31.4 47 39.9

16、28 2250 0.144 600 026* 33 250 MHz 5, 2 40 36.0 67 49.5 42 2300 0.220 600 027* 36 250 MHz 5, 2 37 39.4 47 52.7 24 2080 0.250 600 028* 39 250 MHz 5, 2 40 42.7 60 60.2 40 2200 0.250 600 029* 43 250 MHz 5, 2 38 47.0 44 64.9 21 2000 0.280 600 030* 47 200 MHz 5, 2 38 52.2 62 77.2 35 2000 0.280 600 031* 51

17、 200 MHz 5, 2 35 55.5 69 82.2 34 1900 0.270 600 032* 56 200 MHz 5, 2 38 62.5 56 97.0 26 1900 0.310 600 033* 68 200 MHz 5, 2 37 80.5 54 168 21 1700 0.340 600 034* 72 150 MHz 5, 2 34 82.0 53 135 20 1700 0.490 400 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

18、 IHS-,-,-A-A-59416A 4 TABLE I. Electrical characteristics continued. 900 MHz 1.7 GHz CID dash number AA59416- Inductance(nH) Tolerance (%) Q Min L Typ Q Typ L Typ Q Typ SRF Min (MHz) DCR Max (OHMS) 1/ IDCMAX (mA) 035* 82 150 MHz 5, 2 34 96.2 54 177 21 1700 0.540 400 036* 100 150 MHz 5, 2 34 124 49 -

19、 - 1400 0.580 400 037* 110 150 MHz 5, 2 32 138 43 - - 1350 0.610 300 038* 120 150 MHz 5, 2 32 166 39 - - 1300 0.650 300 039* 150 150 MHz 5, 2 28 250 25 - - 990 0.920 280 040* 180 100 MHz 5, 2 25 305 22 - - 990 1.25 240 041* 200 100 MHz 10, 5 25 - - - - 900 1.98 200 042* 210 100 MHz 10, 5, 2 27 - - -

20、 - 895 2.06 200 043* 220 100 MHz 5, 2 25 - - - - 900 2.10 200 044* 250 100 MHz 10, 5, 2 25 - - - - 822 3.55 120 045* 270 100 MHz 5, 2 24 - - - - 900 2.30 170 046* 330 100 MHz 5, 2 25 - - - - 900 3.89 100 047* 390 100 MHz 5 25 - - - - 900 4.35 100 1/ DC current rating for a 15C rise. TABLE II. Induct

21、ance tolerances Code Tolerance (percentage) K M N 2 5 10 TABLE III. Termination finish. Code Termination finish L T S RoHS compliant, silver-palladium-glass-frit RoHS, tin-silver-copper (95.5/4/0.5) Tin-lead 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials

22、to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). * Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59416A 5 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The products

23、 provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

24、5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product to be provided under this CID: a. The company producing the item must have been producing a product meeting the requirements of this CID for at least 2 years. b. The company must have

25、 sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See secti

26、on 2 for PIN format example. 7.2 Environmentally preferable material. Environmentally preferable materials should be used to the maximum extent possible to meet the requirements of this specification. As of the dating of this document, the U.S. Environmentally Protection Agency (EPA) is focusing eff

27、orts on reducing 31 priority chemicals. The list of chemicals is available on their website at http:/www.epa.gov/epaoswer/hazwaste/minimize/chemlist.htm. Further information is available at the following EPA site: http:/www.epa.gov/epaoswer/hazwaste/minimize/. Included in the EPA list of 31 priority

28、 chemicals are cadmium, lead, and mercury. Use of the materials on the list should be minimized or eliminated unless needed to meet the requirements specified herein (see Section 3). 7.3 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory control, and submission of these i

29、nductors to DSCC under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.4 Source of documents. FEDERAL REGULATIONS FAR - Federal Acquisition Regulations (FAR) (Copies of these documents are available online at www.acquisition.gov/comp/far/index.

30、html or from the U.S. Government Printing Office, 732 North Capital Street, NW, Washington D.C. 20401.) 7.5 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance provisions. c. Packaging requirements. * * Provided by

31、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59416A 6 7.6 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordin

32、ation, these manufacturers were known to have commercial products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 02

33、113 Coilcraft Inc 1102 Silver Lake Road Cary, Illinois 60013-1658 Phone number (847) 639-2361 Uniform Resource Locator (URL): 7.7 Part number (P/N) supersession data. This CID supersedes the following manufacturers P/Ns as shown. This information is being provided to assist in reducing proliferatio

34、n in the government inventory system. TABLE III. P/N supersession data. 1/ CID dash number (see table I) AA59416- Vendor commercial PIN 2/ CAGE 02113 CID dash number (see table I) AA59416- Vendor commercial PIN 2/ CAGE 02113 001* 0603CS-1N6X* 025* 0603CS-30NX* 002* 0603CS-1N8X* 026* 0603CS-33NX* 003

35、* 0603CS-3N3X* 027* 0603CS-36NX* 004* 0603CS-3N6X* 028* 0603CS-39NX* 005* 0603CS-3N9X* 029* 0603CS-43NX* 006* 0603CS-4N3X* 030* 0603CS-47NX* 007* 0603CS-4N7X* 031* 0603CS-51NX* 008* 0603CS-5N1X* 032* 0603CS-56NX* 009* 0603CS-5N6X* 033* 0603CS-68NX* 010* 0603CS-6N8X* 034* 0603CS-72NX* 011* 0603CS-7N5

36、X* 035* 0603CS-82NX* 012* 0603CS-8N2X* 036* 0603CS-R10X* 013* 0603CS-8N7X* 037* 0603CS-R11X* 014* 0603CS-9N5X* 038* 0603CS-R12X* 015* 0603CS-10NX* 039* 0603CS-R15X* 016* 0603CS-11NX* 040* 0603CS-R18X* 017* 0603CS-12NX* 041* 0603CS-R20X* 018* 0603CS-15NX* 042* 0603CS-R21X* 019* 0603CS-16NX* 043* 0603

37、CS-R22X* 020* 0603CS-18NX* 044* 0603CS-R25X* 021* 0603CS-22NX* 045* 0603CS-R27X* 022* 0603CS-23NX* 046* 0603CS-R33X* 023* 0603CS-24NX* 047* 0603CS-R39X* 024* 0603CS-27NX* Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59416A 7 1/ When “*“ is use

38、d for coded values, its the contractors responsibility to select those options allowed by the CID. 2/ The manufacturers P/N shall not be used for procurement to the requirements of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be rep

39、laced by the CID P/N shown. 7.8 Government users. To acquire information on obtaining these coils from the Government inventory system, contact Defense Supply Center, Columbus, ATTN: DSCC-FMTE, Post Office Box 3990, Columbus, OH 43218-3990, or telephone (614) 692-7727. 7.9 Changes from previous issu

40、e. The margins of this CID are marked with asterisks to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requ

41、irements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC DLA - CC Project 5950-2008-060 NOTE: The act

42、ivities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-