DLA A-A-59426-1999 RIVETS BLIND NONSTRUCTURAL RETAINED MANDREL OPEN END DOMED HEAD NICKEL-COPPER ALLOY《镍铜合金制球形圆柱式开口端型限动芯棒用非结构性盲铆钉》.pdf

1、AMSC N/A 1 of 4 FSC 5320DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.INCH-POUNDA-A-5942620 APRIL 1999COMMERCIAL ITEM DESCRIPTIONRIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL,OPEN END, DOMED HEAD, NICKEL-COPPER ALLOYThis General Services Administration has authori

2、zed the use of this Commercial Item Description forall Federal agencies.1. SCOPE: This Commercial Item Description (CID) covers the requirements for pull-stem expandable blindrivets. These rivets are intended for rapid and permanent non-structural fastening applications in which accessis available t

3、o one side only.2. SALIENT CHARACTERISTICS:2.1 Blind rivets furnished under this CID shall conform to the materials, strengths, and dimensions as specified inTable I, II, and III and as shown in Figure 1 below.FIGURE 1. RIVETSBENEFICIAL COMMENTS, RECOMMENDATIONS, ADDITIONS, DELETIONS, CLARIFICATIONS

4、,ETC., AND DATA WHICH MAY IMPROVE THIS DOCUMENT SHOULD BE SENT TO: DEFENSEINDUSTRIAL SUPPLY CENTER, ATTN: DISC-AEEB, 700 ROBBINS AVENUE, PHILADELPHIA, PA19111-5096.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-594262TABLE I. MATERIAL COMBINATIO

5、N SYMBOLS AND STRENGTHSSYMBOL MATERIAL COMBINATION RIVETDIAMINIMUMSHEARLOADLBSMINIMUMTENSIONLOADLBSEBody: Nickel Copper Alloy(UNS N04400)Mandrel: 1030-1060 Steel(UNS G10300-G10600).125.156.188.250350550800140045070010001850TABLE II. BASIC DIMENSIONSBASIC DIMENSIONSNOMDIA.SIZECODENOMDIA D H ERMAXWNOM

6、FMAXPMINRECOMMENDEDHOLE SIZE4 .125 .128.122.262.238.040.030.020 .076 L MAX+ .1201.00 .129-.1335 .156 .159.153.328.296.050.037.020 .095 L MAX+.1401.00 .160-.1646 .188 .191.183.394.356.060.045.025 .114 L MAX+.1601.00 .192-.1968 .250 .255.246.525.475.080.065.030 .151 L MAX+.1801. 00 .257-.261Provided b

7、y IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-594263TABLE III. DASH NUMBERS AND DIMENSIONSDASH NUMBERLMAXRECOMMENDEDGRIP RANGEE401E402E403E404.212.275.337.400.032-.062.063-.125.126-.187.188-.250E502E503E504.300.362.425.063-.125.126-.187.188-.250E602E604E

8、606E608.325.450.575.700.063-.125.126-.250.251-.375.376-.500E804E808.500.750.126-.250.376-.5002.2 Materials shall be of the type and grade specified in Table I.2.3 Surface finish.2.3.1 Nickel-Copper alloy bodies shall be zinc plated in accordance with ASTM B633 Type II, FE/ZN5.2.3.2 Carbon steel mand

9、rels shall be zinc plated or phosphate coated.2.4 Workmanship. Rivets shall be of uniform quality and free from injurious seams and other injurious defects.2.5 Single shear load. The shear test shall be performed in accordance with Test Method 20 of NASM1312, orequivalent and shall conform to the da

10、ta specified in Table I.2.6 Tension load. The tension test shall be performed in accordance with Test Method 8 of NASM1312, orequivalent and shall conform to the data specified in Table I.2.7 Packaging requirements The requirements for packaging shall be in accordance with ASTM D3951.3. QUALITY ASSU

11、RANCE PROVISIONS.3.1 Product conformance. The products provided shall meet the salient characteristics of this commercial itemdescription, conform to the producers own drawings, specifications, standards, and the quality assurance practices,and be the same product offered for sale in the commercial

12、market. The government reserves the right to requireproof of such conformance.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5942644. NOTES4.1 All dimensions are in inches.4.2 The part number shall consist of the basic Commercial Item Descriptio

13、n Number followed by a dash numberfrom Table III. The dash number consists of a material combination symbol from Table I, a nominal bodydiameter size code in thirty-seconds of an inch from Table II, and a maximum grip code in sixteenths of an inchtaken from Table III.EXAMPLE: AA59426 E 4 02Grip Rang

14、e CodeNominal DiameterMaterialCommercial Item Description NumberAA59426E402 Indicates - Rivet, blind, nonstructural, retainedmandrel, open-end, domed head, nickel-copper (UNS N04400) alloy body, C1030-C1060(UNS G10300-G10600) steel mandrel; nominalbody diameter size, .125; grip range,.063-.125.Milit

15、ary Interests:Custodians: Preparing Activity:Army - AR DLA-ISNavy - ASAir Force - 99Review Activities: (Project No. 5320-0955)Army - AV, MIAir Force - 11, 82National Security Agency-NSProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDIZATION DO

16、CUMENT IMPROVEMENT PROPOSALINSTRUCTIONS1. The preparing activity must complete blocks 1, 2, 3 and 8. In block 1, both the document number and revision letter should be given.2. The submitter of this form must complete blocks 4, 5, 6 and 7.3. The preparing activity must provide a reply within 30 days

17、 from receipt of the form.NOTE: This form may not be used to request copies of documents, or to request waivers, or clarification of requirements on current contracts.Comments submitted on this form do not constitute or imply authorization to waive any portion of the referenced document(s) or to ame

18、nd contractual.I RECOMMEND A CHANGE: 1. DOCUMENT NUMBERA-A-594262. DOCUMENT DATE (YYMMDD)9904203. DOCUMENT TITLE:RIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL, OPEN END, DOMED HEAD, NICKEL-COPPERALLOY4. NATURE OF CHANGE5. REASON FOR RECOMMENDATION6. SUBMITTERa. NAME (Last, First, Middle Initial) b.

19、 ORGANIZATIONc. ADDRESS (Include Zip Code) d. TELEPHONE (Include Area Code)(1) Commercial(2) AUTOVON (If applicable)7. DATE SUBMITTED (YYMMDD)8. PREPARING ACTIVITY DLA-ISa. NAMEEmelia Altomarib. TELEPHONE (Include Area Code)(1) Commercial (215) 697-6827(2) (DSN) 442-6827c. ADDRESS (Include Zip Code)

20、Defense Industrial Supply Center700 Robbins AvenueBldg. 3 (Code DISC-AESD)Philadelphia, PA 19111-5096IF YOU DO NOT RECEIVE A REPLY WITHIN 45 DAYS, CONTACT:Defense Quality and Standardization Office5203 Leesburg Pike, Suite 1403Falls Church, VA 22041TELEPHONE (703) 756-2340 AUTOVON 289-2340DD Form 1426, OCT 89 Previous editions are obsolete. 198/290Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-