DLA A-A-59483-2004 OVERALLS POWERSTRETCH WITH RAINBOW DROP SEAT SPEAR SYSTEM LAYER-3《合成羊毛套头体恤衫》.pdf

1、A-A-59483 INCHPOUND A-A-59483 3 March 2004 1. SCOPE This Commercial ItemWeight Powerstretch Bib Overallmalightweight insulation layer of the EAMSC DISTRIBUTION STATEMENT AunlimProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHSCOMMERCIAL ITEM DESCRIPTION OVE

2、RALLS, POWERSTRETCH WITH “RAINBOW DROP SEAT” SPEAR System: Layer-3 Description covers the requirements for the Layer 3 Medium . The powerstretch bib overall is intended to use by le and female military personnel of the Department of Defense as a multi-purpose xtended Cold Weather Clothing System (EC

3、WCS). Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COCT (Bldg 6), 700 Robbins Ave., Philadelphia, PA 19111-5092 or emailed to leo.baileydla.mil. Since contact information can change, you

4、 may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil N/A FSC 8415 . Approved for public release; distribution is ited. 1 -,-,-A-A-59483 2. CLASSIFICATION The Powerstretch Bib Overall with Rainbow Drop Seat will be of one type, color Bla

5、ck 470 or Camouflage Green 483 in color, as specified and in the following sizes as specified: SCHEDULE OF SIZES Small- Regular Medium-Regular Large-Regular Large-Long Extra Large-Regular Extra Large-Long 3. SALIENT CHARACTERISTICS 3.1 Design and construction. The one-piece, full length bib overall

6、has a two-way front zipper, mid-chest inner pockets, full-length side zippers, rainbow drop seat, reinforced seat and knees. All joining seams shall be flat locked construction to reduce bulk and provide comfort in movement. 3.2 Basic material. The following material shall be used to provide the env

7、ironmental protection, user comfort; lightweight and durability, and dimensional moisture management needed for wear in field, combat and operations. The basic material for the Bib Overall shall be a circular knit nylon and spandex jersey plaited to a single sided velour, mid- weight Polartec Powers

8、tretch Malden Mills Style 9401M. This material provides the required military appearance and functionality required by the military. The fabric shall conform to the following requirements: TABLE I. Knit cloth physical requirements. CHARACTERISTIC REQUIREMENT TEST METHOD Weight (oz. per square yard)

9、(oz. per linear yard) 7.1 0.71 12.0 1.2 ASTM D3776 Colorfastness: Laundering Crocking Light Carbon Arc Xenon 2 min Nylon, Acetate, 3 min all other fibers Dry 4.0 / Wet 3.0 20 Hrs. Excellent 4-5 85 Kj. Excellent 4-5 AATCC 61-Option 2a cold wash, 3 cycles AATCC 8 AATCC 16 Option A and Option E Dimensi

10、onal Stability Avg. Pilling Wales: 5.0% max. Courses: 7.0% max. 4 minimum AATCC 135-3 cycles, III, A, iii ASTM D-3512, Random Tumble Method Stretch Wales: 65% min. Courses: 65% min. ASTM 2594, Form fit 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-

11、,-A-A-59483 3.2.1 Internal pocket material. The material for the mid chest inner pockets shall be a warp knit tricot mesh of 100% CoolMaxpolyester or equal. The fabric shall conform to the following requirements: TABLE II. Pocketing material. CHARACTERISTIC REQUIREMENT TEST METHOD Weight (oz. per sq

12、uare yard) Colorfastness: Laundering Crocking Perspiration Light Dimensional Stability-Avg. 2.0 0.2 4, minimum 4, minimum 4, minimum 4, minimum, after 40 hrs. 5.0% Wales X 5.0% Courses max.ASTM D3776 AATCC 61, IIA AATCC 8 AATCC 15 AATCC 16E AATCC 135, III, A, iii 3.2.2 Reinforcement, rainbow drop se

13、at and knees material. The material for the rainbow drop seat and knee patches shall be 2-way stretch Spandura Style 3400. The fabric shall conform to the following requirements: TABLE III. Reinforcement material. H.Warshow seam type not as specified, raw edges; any part of Overalls caught in any un

14、related stitching, the edge of any component part required to be forced out having folds of more than 1/8 inch. Stitches: broken or missing thread or stitch, stitch type not as specified. Workmanship Any component part omitted or not as specified, distorted, full, tight or twisted parts. Any defect

15、not specified in this table which affects, form, fit or function. Cleanness Spot, stain, excessive thread ends not trimmed or removed, raw edges, odor, affecting appearance and serviceability. Labels Omitted, incorrect, illegible, not attached specified; bar codes omitted, not readable by scanner; h

16、uman-readable interpretation (HRI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the Overall. Dimensions and finished measurements Not as specified. Packaging Any Overall not packaged in accordance with the contract or purchase 5.5 Finished dimensions

17、. The Bib Overalls shall conform to the dimensions listed in the Table VIII below: TABLE VII. Powerstretch bib overalls finished measurement SIZE 1/2 - CHEST (A) 1/2 - SEAT (B) 1/2 -BOTTOM-LEG (C) INSEAM (D) SMALL 18” 18” 4-1/2” 28”MEDIUM 20” 20” 4-3/4“ 29” LARGE 22” 22” 5” 30”X-LARGE 24” 24” 5-1/4”

18、 31” LARGE-LONG 22” 22” 5” 33” X-LARGE-LONG 24” 24” 5-1/4” 34” TOLERANCE 1/2” 1/4” 1/4” 1” NOTE: All measurements shall be taken with the garment laid out flat under no tension and with all slide fasteners closed. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license

19、 from IHS-,-,-A-A-59483 (A) Chest Measure at base of armseye, from folded edge to folded edge, with garment laid flat. (B) Seat - Measure 7 inches up from crotch seam, from folded edge to folded edge. (C) Bottom-Leg - Measure bottom of overall leg, from folded edge to folded edge. (D) Inseam - Measu

20、re from crotch seam to bottom edge of hemmed leg. 6. PACKAGING 6.1 Packaging, packing and marking. The packaging and marking used shall be in accordance with the contractors standard commercial practice. Each bib overalls shall be packed individually in a plastic bag and twenty (20) bib overall shal

21、l be packed in each box. If needed, mixed sizes and small boxes may be used to complete a shipment. 7. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory unless otherwise stated in the contract or purchase order.) 7.1 Intended use. T

22、he overalls are for wear by military personnel of the Department of Defense. They are intended for Special Operations Forces Personal Equipment Advance Requirements (SPEAR). They are used as an insulation layer of the Extended Cold Weather Clothing System in field, combat, and operations other than

23、war. 7.2 Acceptance criteria. Sampling for inspection shall be in accordance with ANZI/ASQC Z1.4. The end items shall be examined for visual defects listed in paragraph 5.4. The lot size shall be expressed in units of overalls. The sample unit will be one pair of overalls. The inspection level shall

24、 be II and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 2.5 for major defects. The end item shall be examined for dimensional conformance in accordance with paragraph 5.5. Any dimension not within the specified tolerance shall be classified as a defec

25、t. The lot size shall be expressed in units of overalls. The sample size shall be on pair of overalls. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 4.0. Requirements for this acceptance criteria shall be referenced in the contract or purcha

26、se order. 7.3 Government documents. 7.3.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the

27、Acquisition Streamling and Standardization Information System (ASSIST) database and supplement thereto, cited in the solicitation. 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59483 SPECIFICATIONS CIDS A-A-55634 - Zippers (Fasteners, Slide I

28、nterlocking) A-A-55126 - Fastener Tape, Hook and Loop, Synthetic A-A-52095 - Thread, Polyester, Textured Source of Government documents. Copies of Military and Federal documents are available from: Standardization Documents Order Desk Bldg 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 7.3.2 Sour

29、ce of non-Government documents. The following documents form a part of this document to the extent specified herein. ASTM International ASTM D2594 Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power ASTM D3512 Standard test Method for Pilling Resistance and Other Related

30、Surface Changes of Textile Fabrics: Random Tumble Pilling Tester ASTM D3776 Standard Test Method for Mass Per Unit Area (Weight) of Fabric ASTM D6193 Standard Practice for Stitches and Seams (For all inquires please contact the American Society For Testing and Materials, 100 Barr Harbor Drive, West

31、Conshohocken, PA 19428). Website address http:/www.astm.org AATCC AATCC 8 Colorfastness to Crocking: AATCC Crockmeter Method AATCC 15 Colorfastness to Perspiration AATCC 16 Colorfastness to Light AATCC 61 Colorfastness to Laundering, Home and Commercial: Accelerated AATCC 135 Dimensional Changes in

32、Automatic Home Laundering of Woven and Knit Fabrics (For all inquires please contact the American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Research Triangle Park, NC 27709-2215.) Website address http:/www.aatcc.org 10 Provided by IHSNot for ResaleNo reproduction or netw

33、orking permitted without license from IHS-,-,-A-A-59483 AMERICAN NATIONAL STANDARDS INSTITUTE ANSI/ASQC Z1.4 SAMPLING PROCEDURES AND TABLES FOR INSPECTION OF ATTRIBUTES (For all inquires please contact the American National Standards Institute, 25 West 43rdStreet, 4thFloor, New York, NY 10036). Webs

34、ite address http:/www.ansi.org. MILITARY INTERESTS: Custodians CIVIL AGENCY COORDINATING Army - GL ACTIVITY: Nav - MC GSA - FS PREPARING ACTIVITY: DLA -CT Project 8415-0250 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and res

35、ponsibilities can change, you should verify the currency of the information above using the ASSIST Online database at www.dodssp.daps.mil 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59483 FRONT VIEW BACK VIEW FIGURE I - POWERSTRETCH BIB OVERALL 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-