DLA A-A-59697-2001 COIL RF CHIP FIXED HIGH FREQUENCY《高频固定芯片阻力系数线圈》.pdf

1、Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-0557, or facsimile (FAX) (614)

2、692-6939. AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND A-A-59697 1 October 2001 COMMERCIAL ITEM DESCRIPTION COIL, RF, CHIP, FIXED, HIGH FREQUENCY The General Services Administration has authorized the use of this commercial item descr

3、iption (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements for a radio frequency coil. Coils covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identification N

4、umber (PIN) as shown in the following example (see 7.1). AA59697 - 001 F CID number Dash number (see table I) Inductance Tolerance (see table II) 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Coils supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrica

5、l characteristics. The electrical characteristics shall be as specified in table I. 3.3 Weight. The weight shall be no greater than 0.5 gram maximum. 3.4 Operating temperature range. The operating temperature range is 40C to +125C. 3.5 Temperature rise. DC current rating for 15C rise 3.6 Altitude. T

6、he maximum altitude is 70,000 feet. 3.7 Marking. Coils supplied to this CID shall be marked with the manufacturers standard commercial PIN. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59697 2 Dimension INCHES MM A B C D E F G H .076 - .084 .0

7、95 - .105 .080 Max. .115 Max. .110 Max. .010 - .025 .015 - .025 .020 Ref. 1.93 2.13 2.41 2.67 2.03 Max. 2.92 Max. 2.79 Max. 0.25 0.64 0.38 0.64 0.508 Ref. NOTES: 1. Dimensions are in Inches. 2. Metric equivalents are listed for general information only. FIGURE 1. Configuration and dimensions. Provid

8、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59697 3 TABLE I. Electrical characteristics. CID dash number AA59697- Inductance (nH) Tolerance (%) Q min SRF min (MHz) DCR Max (Ohms) IDCMax (mA) 001 10 50 MHz 20, 10, 5, 2 50 500 MHz 4100 .08 1000 002 1

9、2 50 MHz 20, 10, 5, 2 50 500 MHz 3300 .09 1000 003 15 50 MHz 20, 10, 5, 2 50 500 MHz 2500 .10 1000 004 18 50 MHz 20, 10, 5, 2 50 350 MHz 2500 .11 1000 005 22 50 MHz 20, 10, 5, 2, 1 55 350 MHz 2400 .12 1000 006 27 50 MHz 20, 10, 5, 2 55 350 MHz 1600 .13 1000 007 33 50 MHz 20, 10, 5, 2 60 350 MHz 1600

10、 .14 1000 008 39 50 MHz 20, 10, 5, 2 60 350 MHz 1500 .15 1000 009 47 50 MHz 20, 10, 5, 2, 1 65 350 MHz 1500 .16 1000 010 56 50 MHz 10, 5, 2, 1 65 350 MHz 1300 .18 1000 011 68 50 MHz 10, 5, 2, 1 65 350 MHz 1300 .20 1000 012 82 50 MHz 10, 5, 2, 1 60 350 MHz 1000 .22 1000 013 100 25 MHz 10, 5, 2, 1 60

11、350 MHz 1000 .56 650 014 120 25 MHz 10, 5, 2, 1 60 350 MHz 950 .63 650 015 150 25 MHz 10, 5, 2, 1 45 100 MHz 850 .70 580 016 180 25 MHz 10, 5, 2, 1 45 100 MHz 750 .77 620 017 220 25 MHz 10, 5, 2, 1 45 100 MHz 700 .84 500 018 270 25 MHz 10, 5, 2, 1 45 100 MHz 600 .91 500 019 330 25 MHz 10, 5, 2, 1 45

12、 100 MHz 570 1.05 450 020 390 25 MHz 10, 5, 2, 1 45 100 MHz 500 1.12 470 021 470 25 MHz 10, 5, 2, 1 45 100 MHz 450 1.19 470 022 560 25 MHz 10, 5, 2, 1 45 100 MHz 415 1.33 400 023 620 25 MHz 10, 5, 2, 1 45 100 MHz 375 1.40 300 024 680 25 MHz 10, 5, 2, 1 45 100 MHz 375 1.47 400 025 750 25 MHz 10, 5, 2

13、, 1 45 100 MHz 360 1.54 360 026 820 25 MHz 10, 5, 2, 1 45 100 MHz 350 1.61 400 027 910 25 MHz 10, 5, 2, 1 35 50 MHz 320 1.68 380 028 1000 25 MHz 10, 5, 2, 1 35 50 MHz 290 1.75 370 029 1200 7.9 MHz 10, 5, 2 35 50 MHz 250 2.0 310 030 1500 7.9 MHz 10, 5, 2 28 50 MHz 200 2.3 330 031 1800 7.9 MHz 10, 5,

14、2 28 50 MHz 160 2.6 300 032 2200 7.9 MHz 10, 5, 2 28 50 MHz 160 2.8 280 033 2700 7.9 MHz 10, 5, 2 22 25 MHz 140 3.2 290 034 3300 7.9 MHz 10, 5, 2 22 25 MHz 110 3.4 290 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59697 4 TABLE I. Electrical ch

15、aracteristics. - continued CID dash number AA59697- Inductance (nH) Tolerance (%) Q min SRF min (MHz) DCR Max (Ohms) IDCMax (mA) 035 3900 7.9 MHz 10, 5, 2 20 25 MHz 100 3.6 260 036 4700 7.9 MHz 10, 5, 2 20 25 MHz 90 4.0 260 037 5600 7.9 MHz 10, 5 16 7.9 MHz 20 4.0 240 038 6800 7.9 MHz 10, 5 18 7.9 M

16、Hz 40 4.9 200 039 8200 7.9 MHz 10, 5 18 7.9 MHz 25 6.0 170 TABLE II. Inductance tolerances Code Tolerance (percentage) F G J K M 1 2 5 10 20 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.

17、403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same pro

18、duct offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product to be provided under this CID: a. The company producing the ite

19、m must have been producing a product meeting the requirements of this CID for at least 2 years. b. The company must have sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or or

20、der. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59697 5 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Commercial and Government Entity (CAG

21、E) code. For ordering purposes, inventory control, and submission of these inductors to DSCC under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.3 Ordering data. The contract or order should specify the following: a. CID document number, revi

22、sion, and CID PIN. b. Product conformance provisions. c. Packaging requirements. 7.4 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manuf

23、acturers were known to have commercial products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 02113 Coilcraft Inc1

24、102 Silver Lake Road Cary, Illinois 60013-1658 Phone number (847) 639-2361 Uniform Resource Locator (URL): Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59697 6 7.5 Part number (P/N) supersession data. This CID supersedes the following manufac

25、turers P/Ns as shown. This information is being provided to assist in reducing proliferation in the government inventory system. TABLE II. P/N supersession data. 1/ CID dash number (see table I) AA59697- Vendor commercial PIN CAGE 02113 2/ CID dash number (see table I) AA59697- Vendor commercial PIN

26、 CAGE 02113 2/ 001* 1008CS-100X*B* 021* 1008CS-471X*B* 002* 1008CS-120X*B* 022* 1008CS-561X*B* 003* 1008CS-150X*B* 023* 1008CS-621X*B* 004* 1008CS-180X*B* 024* 1008CS-681X*B* 005* 1008CS-220X*B* 025* 1008CS-751X*B* 006* 1008CS-270X*B* 026* 1008CS-821X*B* 007* 1008CS-330X*B* 027* 1008CS-911X*B* 008*

27、1008CS-390X*B* 028* 1008CS-102X*B* 009* 1008CS-470X*B* 029* 1008CS-122X*B* 010* 1008CS-560X*B* 030* 1008CS-152X*B* 011* 1008CS-680X*B* 031* 1008CS-182X*B* 012* 1008CS-820X*B* 032* 1008CS-222X*B* 013* 1008CS-101X*B* 033* 1008CS-272X*B* 014* 1008CS-121X*B* 034* 1008CS-332X*B* 015* 1008CS-151X*B* 035*

28、1008CS-392X*B* 016* 1008CS-181X*B* 036* 1008CS-472X*B* 017* 1008CS-221X*B* 037* 1008CS-562X*B* 018* 1008CS-271X*B* 038* 1008CS-682X*B* 019* 1008CS-331X*B* 039* 1008CS-822X*B* 020* 1008CS-391X*B* 1/ When “*“ is used for coded values, its the contractors responsibility to select those options allowed

29、by the CID. 2/ The manufacturers P/N shall not be used for procurement to the requirements of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. Provided by IHSNot for ResaleNo reproduction or networking

30、permitted without license from IHS-,-,-A-A-59697 7 7.6 Government users. To acquire information on obtaining these coils from the Government inventory system, contact Defense Supply Center, Columbus, ATTN: DSCC-CPAA, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-7741. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC Project 5950-1065 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-