DLA A-A-59737-2002 INDUCTOR POWER SURFACE MOUNT《表面安装功率诱导体》.pdf

1、INCH-POUND A-A-59737 October 25, 2002 COMMERCIAL ITEM DESCRIPTION INDUCTOR, POWER, SURFACE MOUNT The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements for an inductor. Inductor

2、s covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1). AA59737 - 001 CID number Dash number (see table I) 3. SALIENT CHA

3、RACTERISTICS. 3.1 Interface and physical dimensions. Inductors supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrical characteristics. The electrical characteristics shall be as specified in table I. 3.3 Weight. The weight shall be no greater than 1.4 gram maximum. 3.4 Op

4、erating temperature range. The operating temperature range is 40C to +85C. 3.5 Temperature rise. DC current rating for a 40C rise. 3.6 Altitude. The maximum altitude is 70,000 feet. 3.7 Marking. Inductors supplied to this CID shall be marked with the manufacturers standard commercial PIN. Beneficial

5、 comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-0557, or facsimile (FAX) (614) 692-6939.

6、AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59737 Dimension Inches mm Dimension Inches mm A B C D E .370 Max .510 Max .330 Dia .205 Max .100 9

7、.40 Max 12.95 Max 8.38 Dia 5.21 Max 2.54 F G H I J .300 .100 .110 .115 .290 7.62 2.54 2.79 2.92 7.37 NOTES: 1. Dimensions are in Inches. 2. Metric equivalents (in parenthesis) are listed for general information only. FIGURE 1. Configuration and dimensions. 2 Provided by IHSNot for ResaleNo reproduct

8、ion or networking permitted without license from IHS-,-,-A-A-59737 TABLE I. Electrical characteristics. CID dash number AA59737- L 20% (H) DCR Max (Ohms) SRF typ (MHz) Isat (A) Irms (A rms) 001 1.0 .009 100 9.0 6.8 002 1.5 .010 90 8.0 6.4003 2.2 .012 80 7.0 6.1 004 3.3 .015 65 6.4 5.4005 4.7 .018 45

9、 5.4 4.8 006 6.8 .027 38 4.6 4.4007 10 .038 30 3.8 3.9 008 15 .046 27 3.0 3.1 009 22 .085 19 2.6 2.7 010 33 .10 15 2.0 2.1 011 47 .14 12 1.6 1.8 012 68 .20 10 1.4 1.5 013 100 .28 9 1.2 1.3 014 150 .40 6 1.0 1.0 015 220 .61 5 .8 .8 016 330 1.02 4.5 .6 .6 017 470 1.27 3.5 .5 .5 018 680 2.02 2.5 .4 .4

10、019 1000 3.00 2.0 .3 .3 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The produ

11、cts provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformanc

12、e. 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of the product to be provided under this CID: a. The company producing the item must have been producing a product meeting the requirements of this CID for at least 2 years. b. The company must h

13、ave sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59737 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order. 7.

14、 NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory control, and submission of these inductors to DSCC under the Military Parts

15、 Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.3 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance provisions. c. Packaging requirements. 7.4 Commercial products. As part of

16、the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID. (NOTE: This information

17、 should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 02113 Coilcraft Inc 1102 Silver Lake Road Cary, Illinois 60013-1658 Phone number (847) 639-2361 Uniform Resource Locator (URL): 4 Provid

18、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59737 7.5 Part number (P/N) supersession data. This CID supersedes the following manufacturers P/Ns as shown. This information is being provided to assist in reducing proliferation in the government inven

19、tory system. TABLE II. P/N supersession data. CID dash number (see table I) AA59737- Vendor commercial PIN CAGE 02113 1/ 001 DO3316P-102 002 DO3316P-152003 DO3316P-222 004 DO3316P-332005 DO3316P-472 006 DO3316P-682007 DO3316P-103 008 DO3316P-153009 DO3316P-223 010 DO3316P-333011 DO3316P-473 012 DO33

20、16P-683013 DO3316P-104 014 DO3316P-154015 DO3316P-224 016 DO3316P-334017 DO3316P-474 018 DO3316P-684019 DO3316P-105 1/ The manufacturers P/N shall not be used for procurement to the requirements of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed

21、 and could be replaced by the CID P/N shown. 7.6 Government users. To acquire information on obtaining these inductors from the Government inventory system, contact Defense Supply Center, Columbus, ATTN: DSCC-CPAA, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-7741. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC Project 5950-1151 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-