DLA A-A-59741-2002 INDUCTOR POWER SHIELDED ULTRAMINIATURE SURFACE MOUNT《表面安装超微型的遮蔽的功率诱导体》.pdf

1、INCH-POUND A-A-59741 October 25, 2002 COMMERCIAL ITEM DESCRIPTION INDUCTOR, POWER, SHIELDED, ULTRAMINIATURE, SURFACE MOUNT The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers the general requirements

2、 for a power inductor. Inductors covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION. This CID uses a classification system, which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1). AA59741 - 001 CID number Dash num

3、ber (see table I) 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Inductors supplied to this CID shall be as specified herein. (see figure 1). 3.2. Electrical characteristics. The electrical characteristics shall be as specified in table I. 3.3 Weight. The weight shall be no great

4、er than 0.5 gram maximum. 3.4 Operating temperature range. The operating temperature range is 40C to +85C. 3.5 Temperature rise. DC current rating for a 30C rise. 3.6 Altitude. The maximum altitude is 70,000 feet. 3.7 Marking. Inductors supplied to this CID shall be marked with the manufacturers sta

5、ndard commercial PIN. Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-0557, or

6、facsimile (FAX) (614) 692-6939. AMSC N/A FSC 5950 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59741 Dimension Inches mm Dimension Inches mm A B C D E F .175 Max

7、 .260 Max .160 Dia .115 Max .050 .170 4.45 Max 6.60 Max 4.06 Dia 2.92 Max 1.27 4.32 G H I J K L .040 .120 .055 .160 .270 .140 1.02 3.05 1.40 4.06 6.86 3.56 NOTES: 1. Dimensions are in Inches. 2. Metric equivalents (in parenthesis) are listed for general information only. FIGURE 1. Configuration and

8、dimensions. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59741 TABLE I. Electrical characteristics. CID dash number AA59741- L 20% (H) Q min DCR Max (Ohms) SRF typ (MHz) Current Max (A) 001 1.0 30 200 KHz .040 250 3.0 002 1.5 30 200 KHz .045

9、 125 2.8 003 2.2 40 200 KHz .050 120 1.8 004 3.3 40 200 KHz .055 120 1.6 005 4.7 40 200 KHz .060 105 1.4 006 6.8 40 200 KHz .065 50 1.2 007 10 40 200 KHz .075 38 1.0 008 15 40 100 KHz .090 33 .80 009 22 40 100 KHz .11 25 .70 010 33 40 100 KHz .19 20 .60 011 47 40 100 KHz .23 20 .50 012 68 40 100 KHz

10、 .29 15 .40 013 100 40 100 KHz .48 10 .30 014 150 40 100 KHz .59 9 .26 015 220 40 100 KHz .77 6 .22 016 330 40 100 KHz 1.4 5 .20 017 470 40 100 KHz 1.8 4 .19 018 680 40 100 KHz 2.2 3 .18 019 1000 40 100 KHz 3.4 2 .15 020 1500 50 100 KHz 4.2 2 .12 021 2200 50 100 KHz 8.5 2 .10 022 3300 50 100 KHz 11.

11、0 1 .08 023 4700 50 100 KHz 13.9 1 .06 024 6800 50 100 KHz 25.0 1 .04 025 10000 50 100 KHz 32.8 0.8 .02 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regula

12、tion (FAR). 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commerci

13、al market. The Government reserves the right to require proof of such conformance. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59741 5.2 Market acceptance. The following market acceptance criteria are necessary to document the quality of th

14、e product to be provided under this CID: a. The company producing the item must have been producing a product meeting the requirements of this CID for at least 2 years. b. The company must have sold 1,000 units meeting this CID in the commercial marketplace over the past 2 years. 6. PACKAGING. Prese

15、rvation, packing, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Commercial and Government Entity (CAGE) code. For ordering purposes, inven

16、tory control, and submission of these inductors to DSCC under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.3 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conform

17、ance provisions. c. Packaging requirements. 7.4 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manufacturers were known to have commercia

18、l products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 02113 Coilcraft Inc 1102 Silver Lake Road Cary, Illinois

19、60013-1658 Phone number (847) 639-2361 Uniform Resource Locator (URL): 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59741 7.5 Part number (P/N) supersession data. This CID supersedes the following manufacturers P/Ns as shown. This informati

20、on is being provided to assist in reducing proliferation in the government inventory system. TABLE II. P/N supersession data. CID dash number (see table I) AA59741- Vendor commercial PIN CAGE 02113 1/ CID dash number (see table I) AA59741- Vendor commercial PIN CAGE 02113 1/ 001 DS1608C-102 014 DS16

21、08C-154 002 DS1608C-152 015 DS1608C-224003 DS1608C-222 016 DS1608C-334 004 DS1608C-332 017 DS1608C-474005 DS1608C-472 018 DS1608C-684 006 DS1608C-682 019 DS1608C-105007 DS1608C-103 020 DS1608C-155 008 DS1608C-153 021 DS1608C-225009 DS1608C-223 022 DS1608C-335 010 DS1608C-333 023 DS1608C-475011 DS160

22、8C-473 024 DS1608C-685 012 DS1608C-683 025 DS1608C-106013 DS1608C-104 1/ The manufacturers P/N shall not be used for procurement to the requirements of this CID. At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. 7

23、.6 Government users. To acquire information on obtaining these inductors from the Government inventory system, contact Defense Supply Center, Columbus, ATTN: DSCC-CPAA, Post Office Box 3990, Columbus, OH 43216-5000, or telephone (614) 692-7741. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE Custodians: Navy - EC Preparing Activity: DLA - CC Project 5950-1157 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-