DLA A-A-59873-2010 ASSAULT CLIMBER TEAM KIT (ACTK).pdf

1、AMSC N/A FSC 8465 A-A-59873 20 July, 2010 COMMERCIAL ITEM DESCRIPTION ASSAULT CLIMBER TEAM KIT (ACTK) The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This commercial item description covers the requirements for an Ass

2、ault Climber Team Kit in support of an Infantry Brigade Combat Team (IBCT) platoon. The kit will contain items, some with multiple sizes that will assist a trained assault climber team operating in up to Class 5 Terrain in Operational Terrain Level 1 and Operational Terrain Level 2 absent of signifi

3、cant snow and ice. 2. CLASSIFICATION. The Assault Climber Team Kit (ACTK) will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following: TABLE I. List of items in kit Item Name Commercial Item Description Type Size Quantity Anchor, Rock, Chock 8465-01-578-6458

4、A-A-59834 I 1 1 Anchor, Rock, Chock 8465-01-578-6642 A-A-59834 I 2 1 Anchor, Rock, Chock 8465-01-578-6671 A-A-59834 I 3 1 Anchor, Rock, Chock 8465-01-578-6823 A-A-59834 I 4 1 Anchor, Rock, Chock 8465-01-578-6849 A-A-59834 I 5 1 Anchor, Rock, Chock 8465-01-578-6852 A-A-59834 I 6 1 Anchor, Rock, Chock

5、 8465-01-578-6859 A-A-59834 I 7 1 Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP Standardization Team, 700 Robbins Avenue, Philadelphia PA 19111-5096 or e-mailed to NATI-Mountainconus.army

6、mil. Since contact information can change, you may want to verify the currency of the address information using the Acquisition Streamlining and Standardization Information System (ASSIST) online database https:/assist.daps.dla.mil/online/. METRIC Provided by IHSNot for ResaleNo reproduction or net

7、working permitted without license from IHS-,-,-A-A-59873 2 TABLE I. List of items in kit - Continued Item Name Commercial Item Description Type Size Quantity Anchor, Rock, Chock 8465-01-578-7082 A-A-59834 I 8 1 Anchor, Rock, Chock 8465-01-578-7089 A-A-59834 I 9 1 Anchor, Rock, Chock 8465-01-578-7162

8、 A-A-59834 I 10 1 Anchor, Rock, Chock 8465-01-578-7310 A-A-59834 I 11 1 Anchor, Rock, Chock 8465-01-578-7347 A-A-59834 I 12 1 Anchor, Rock, Chock 8465-01-578-7490 A-A-59834 I 13 1 Anchor, Rock, Camming Device 8465-01-578-7534 A-A-59856 I .3 1 Anchor, Rock, Camming Device 8465-01-578-7535 A-A-59856 I

9、 4 1 Anchor, Rock, Camming Device 8465-01-578-7711 A-A-59856 I .5 1 Anchor, Rock, Camming Device 8465-01-578-7763 A-A-59856 I .75 1 Anchor, Rock, Camming Device 8465-01-578-7483 A-A-59856 I 1 1 Anchor, Rock, Camming Device 8465-01-578-7798 A-A-59856 I 2 1 Anchor, Rock, Camming Device 8465-01-578-785

10、1 A-A-59856 II 00 1 Anchor, Rock, Camming Device 8465-01-578-7533 A-A-59856 II 0 1 Anchor, Rock, Camming Device 8465-01-578-7530 A-A-59856 II 1 1 Anchor, Rock, Camming Device 8465-01-578-7829 A-A-59856 II 2 1 Ascender, Mechanical 8465-01-579-3239 A-A-59841 I - 3 Provided by IHSNot for ResaleNo repro

11、duction or networking permitted without license from IHS-,-,-A-A-59873 3 TABLE I. List of items in kit - Continued Item Name Commercial Item Description Type Size Quantity Ascender, Mechanical 8465-01-579-3245 A-A-59841 II - 3 Bag, Assault Climber 8465-01-578-8828 - - 3 Belay Device, Mountaineering

12、8465-01-578-7850 A-A-59842 - - 3 Carabiner 8465-01-578-8898 A-A-59836 H(1) - 9 Carabiner 8465-01-578-8906 A-A-59836 X - 30 Container, ACT Kit 6760-01-491-2810 - - - 1 Harness, Mountaineering 8465-01-578-8910 A-A-59847 I - 3 Pick, Chock 4240-01-582-5611 A-A-59853 - - 3 Rope, Kernmantle 4020-01-577-86

13、86 A-A-59835 I III 1 Rope, Kernmantle 4020-01-577-8748 A-A-59835 III I 2 Webbing, Mountaineering 8305-01-578-8909 A-A-59840 I III 20 Visual Users Guide, ACT Kit - - - 40 3.2 Dimensions. Individual item dimensions will be in accordance with manufacturers current specifications. 3.3 Materials. Individ

14、ual item materials will be in accordance with manufacturers current specifications. 3.4 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.5 Workmanship. The ACTK shall conform

15、to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The ACTK shall have no unexpecte

16、d material or component failures during a continuous one-year cycle. The ACTK shall have no unexpected material or component failures during periodic use over a five year period. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59873 4 3.7 Labels/

17、barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in acco

18、rdance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the oper

19、ational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifica

20、tions, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 Visual examination. Each kit shall be examined for the following defects as listed in Table II: TABLE

21、 II. End item examination Examine Defect Description Components Missing components Incorrect manufacturer or model 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, pa

22、cking and marking shall be as specified in the contract or order (see 7.2). 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.daps.dla.mil/online/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue

23、 Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.1.3 Non-Government documents. Non-Government standards and other publications are normally available f

24、rom the organizations that prepare or distribute the documents. These documents may be available in or through libraries or other informational services. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59873 5 7.2 Ordering data. The contract or o

25、rder should specify the following: a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 Key words. Mountain equipment MILITARY INTERESTS: CIVIL AGENCY COORDIN

26、ATING ACTIVITY: Custodians: GSA-FAS Army GL PREPARING ACTIVITY: DLA-CT Project 8465-2010-009 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/online/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-