DLA A-A-59886 3 A-2011 CIRCUIT BREAKERS MINIATURE THERMAL MAGNETIC SHOCK ENHANCED TRIP-FREE SERIES TRIP HIGH DENSITY DESIGN 35 MM DIN CHANNEL MOUNT THREE POLE 0 2 TO 30 AMPERES (A).pdf

1、AMSC N/A FSC 5925 INCH-POUND A-A-59886/3A 27 October 2011 SUPERSEDING A-A-59886/3 12 August 2011 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET CIRCUIT BREAKERS, MINIATURE, THERMAL MAGNETIC, SHOCK ENHANCED, TRIP-FREE, SERIES TRIP, HIGH DENSITY DESIGN, 35 MM DIN CHANNEL MOUNT, THREE POLE, 0.2 TO 30

2、AMPERES (A) The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. The complete requirements for procuring the circuit breakers described herein shall consist of this document and the issue in effect of CID A-A-59886. CLASSIFICA

3、TION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classification system which is included in the PIN as shown in the following example (see NOTES). AA59886 /03 - 001 A CID number Applicable CID specification sheet (two digits) Current rating

4、(see table I) (A) Auxiliary contacts Blank for no auxiliary contacts. SALIENT CHARACTERISTICS. Interface and physical dimensions. Circuit breakers supplied to this CID specification sheet shall be as specified herein and shall meet the requirements of UL 1077 and CSA C22.2 Number 235 for supplementa

5、ry protectors and EN/IEC 60934 for circuit breakers for equipment (CBE) (see figure 1). Maximum voltage and frequency rating. The maximum voltage and frequency rating shall be 480 V ac/ 277 V ac at 50/60 Hertz, 65 V dc. Current rating. The current rating shall be in accordance with table I. Calibrat

6、ion (Time delay). Calibration (time delay) shall be in accordance with table II. Temperature range. The temperature range shall be -40F to 149F (-40C to 65C) non-condensing. Operating life. The operating life shall be 6,000 operations at rated current. Housing material. The housing material shall be

7、 glass-filled Polyamide 6.6. Shock. The shock shall be 25 G, 11 ms duration. Terminal type. The terminal type shall be tubular screw with self-lifting box lug. Wire size. The wire size shall be number 22 to number 10 AWG. Provided by IHSNot for ResaleNo reproduction or networking permitted without l

8、icense from IHS-,-,-A-A-59886/3A 2 Ltr Inches mm Min Max Min Max A 3.475 3.485 88.27 88.52 B 3.145 3.155 80.01 80.14 C 3.475 3.485 88.27 88.52 D .405 0.415 10.29 10.54 E .505 0.515 12.83 13.08 F .485 0.495 12.32 12.57 G .975 0.985 24.77 25.02 H 1.465 1.475 37.21 37.47 NOTES: 1. Dimensions are in inc

9、hes. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerance is .005 (0.13 mm). FIGURE 1. Interface and physical dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59886/3A 3 TABLE I. PIN da

10、sh number parameters. CID dash number AA59886/03- Current rating (Amperes) CID dash number AA59886/03- Current rating (Amperes) 001 0.2 011 5.0 002 0.5 012 6.0 003 0.8 013 7.0 004 1.0 014 8.0 005 1.2 015 10.0 006 1.5 016 12.0 007 2.0 017 15.0 008 2.5 018 16.0 009 3.0 019 20.0 010 4.0 020 25.0 TABLE

11、II. Calibration (time delay) in seconds. Tripping-time delay at +21.1C (70F) (tripping time in seconds) Time delay Percent rated current 100 percent 200 percent 300 percent 400 percent Tripping times (seconds) Max Min Max Min Max Min Max Min No trip 40 10 18 3 9 1.5 Time delay Percent rated current

12、500 percent 600 percent 1000 percent 2000 percent greater Tripping times (seconds) Max Min Max Min Max Min Max Min 6 0.8 4 0.003 2 0.009 0.02 n/a Recommended wire strip length. The recommended wire strip length shall be .51 inch (13 mm) for the main terminal and .41 inch (10.4 mm) for the auxiliary

13、terminal. Terminal torque. 0.656 Newton meters (N m) (5 pounds (lb) inch) Auxiliary contacts (N.O. or N.C.). Contact capacity shall be 1.0 amperes ac or dc (Resistive load). NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the

14、 classification information for PIN format example. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59886/3A 4 Source of documents. Other Publications CANADIAN STANDARDS ASSOCIATION (CSA) CSA C22.2 NO 235 - Supplementary Protectors. (Copies of th

15、is document is available online at http:/www.csa.ca/ or from the Canadian Standards Association, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131-5575.) INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) EN/IEC 60934 - Circuit Breakers for Equipment (CBE). (Copies of this document is available onl

16、ine at http:/www.iec.ch/ or from the International Electrotechnical Commission , 446 Main Street, 16th Floor, Worcester, MA 01608.) UNDERWRITERS LABORATORIES, INCORPORATED (UL) UL 1077 - Supplementary Protectors for Use in Electrical Equipment, Standard For Safety. (Copies of this document is availa

17、ble online at http:/ or from the Underwriters Laboratories, Incorporated, 333 Pfingsten Road, Northbrook, IL 60062-2096.) (Industry association specifications and standards are generally available for reference from libraries. They are also distributed among technical groups and using Federal agenci

18、es.) Commercial products. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial p

19、roducts that would meet the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict acquisition to only the manufacturers shown.) MFRs CAGE MFRs name and address 4H047 Rockwell Automation, Incorporated

20、1 Allen-Bradley Drive Mayfield Heights, OH 44124-6118 Phone number: (440) 646-5000 Facsimile number: (440) 646-3138 E-mail: RAG Uniform Resource Locator (URL): Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59886/3A 5 Part number (P/N) superses

21、sion data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown. This information is being provided to assist in reducing proliferation in the Government inventory system. TABLE I. P/N supersession data. CID dash number (see table I) AA59886/03- MFRs CAGE 4H047 CID dash numb

22、er (see table I) AA59886/03- MFRs CAGE 4H047 MFRs P/N 1/ MFRs P/N 1/ 001 1492-GS3G002 001A 1492-GS3G002H1 002 1492-GS3G005 002A 1492-GS3G005H1 003 1492-GS3G008 003A 1492-GS3G008H1 004 1492-GS3G010 004A 1492-GS3G010H1 005 1492-GS3G012 005A 1492-GS3G012H1 006 1492-GS3G015 006A 1492-GS3G015H1 007 1492-

23、GS3G020 007A 1492-GS3G020H1 008 1492-GS3G025 008A 1492-GS3G025H1 009 1492-GS3G030 009A 1492-GS3G030H1 010 1492-GS3G040 010A 1492-GS3G040H1 011 1492-GS3G050 011A 1492-GS3G050H1 012 1492-GS3G060 012A 1492-GS3G060H1 013 1492-GS3G070 013A 1492-GS3G070H1 014 1492-GS3G080 014A 1492-GS3G080H1 015 1492-GS3G

24、100 015A 1492-GS3G100H1 016 1492-GS3G120 016A 1492-GS3G120H1 017 1492-GS3G150 017A 1492-GS3G150H1 018 1492-GS3G160 018A 1492-GS3G160H1 019 1492-GS3G200 019A 1492-GS3G200H1 020 1492-GS3G250 020A 1492-GS3G250H1 1/ The manufacturers P/N shall not be used for acquisition to the requirements of this CID.

25、 At the time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. For actual part marking requirements see the marking paragraph of A-A-59886. Provided by IHSNot for ResaleNo reproduction or networking permitted without license

26、from IHS-,-,-A-A-59886/3A 6 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS Custodians: Navy - EC Preparing activity: DLA - CC DLA-CC Project 5925-2012-003 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-