DLA A-A-59904-2012 HIGH ANGLE MOUNTAINEERING KIT (HAMK) SINGLE PACK.pdf

1、 AMSC N/A FSC 8465 A-A-59904 23 August 2012 COMMERCIAL ITEM DESCRIPTION HIGH ANGLE MOUNTAINEERING KIT (HAMK) SINGLE PACK The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers th

2、e requirements for a kit that augments the High Angle Mountaineering Kit (HAMK) (A-A-59869) beyond the forty personnel it supports. It will provide one user the equipment necessary to perform the same tasks as Soldiers who are issued the HAMK. 2. CLASSIFICATION. The High Angle Mountaineering Kit (HA

3、MK) Single Pack will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in kit Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Supp

4、ort, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. I

5、tem Name/NSN Commercial Item Description # Type Size/ Class Color Quantity Harness, Mountaineering A-A-59847 I - Tan 1 Carabiner A-A-59836 H (1) green 2 Carabiner A-A-59836 X - green 2 Belay Device, Mountaineering A-A-59842 - - Titanium 1 Webbing, Mountaineering A-A-59840 I I Foliage Green 2 Visual

6、Users Guide, HAM Kit - - - color 1 Visual Users Guide, MTN OPS - - - color 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59904 2 3.1 Dimensions. Individual item dimensions shall be in accordance with drawings and specification requirem

7、ents specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors shall be in accordance with applicable specifications (see Table I). 3.3 End item testing. Ind

8、ividual item test standards shall be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials shall be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The HAMK Single Pack

9、shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The HAMK Single Pa

10、ck shall have no unexpected material or component failures during a continuous one-year cycle. The HAMK Single Pack shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and i

11、nstruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each High Angle Mountaineering Kit (HAMK) Single Pack shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following infor

12、mation shall be included in the printing for the identification label: HIGH ANGLE MOUNTAINEERING KIT (HAMK) SINGLE PACK NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any ma

13、rking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging

14、i. Identification of the model, if more than one model is available Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59904 3 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practica

15、ble, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exce

16、eds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawing

17、s, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in T

18、able II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. Th

19、e preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk,

20、Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: Pr

21、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59904 4 a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7

22、.3 National Stock Numbers (NSNs). The following is a list of NSNs Sizes and Types associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59869, High Angle Mountaineering Kit, listed below: NSNs SIZE TYPE ITEM 8465-01-578-8910 I Harness, Mountaineering

23、8465-01-578-8898 H (1) Carabiner 8465-01-578-8906 X Carabiner 8465-01-578-7850 - Belay Device, Mountaineering 8305-01-578-8909 I I Webbing, Mountaineering 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT P

24、roject Number: 8465-2012-014 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-