DLA DESC-DWG-89021 REV E-2013 CAPACITORS FIXED ELECTROLYTIC POLARIZED ALUMINUM OXIDE ULTRA-LOW ESR.pdf

1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Added capacitance 390 F at 63 V dc. Editorial changes throughout. 16 Dec 93 D. Moore B Editorial changes throughout. 13 Sep 00 Kendall A. Cottongim C Corrections to capacitor formula in paragraph 3.2.5 30 July 01 Kendall A. Cottongim D Removed the source of

2、 supply. Added a new source of supply. Editorial and format changes. 13 Dec 04 Kendall A. Cottongim E Editorial changes throughout. 21 May 2013 Michael A. Radecki Prepared in accordance with ASME Y14.100 REV STATUS OF PAGES REV E E E E E E E E E E E PAGES 1 2 3 4 5 6 7 8 9 10 11 PMIC N/A PREPARED BY

3、 Robert E. Grillot DESIGN ACTIVITY DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH 45444-5000 Original date of drawing 28 April 1989 CHECKED BY Heraldine Johnson TITLE CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, ULTRA-LOW ESR APPROVED BY David E. Moore SIZE A CODE IDENT. NO. 14933 DWG NO

4、. 89021 REV E PAGE 1 OF 11 AMSC N/A 5910-2013-E09 CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT

5、 NO. 14933 DWG NO. 89021 REV E PAGE 2 1. SCOPE 1.1 Scope. This drawing describes the requirements for aluminum oxide, electrolytic capacitors. 1.2 Part or Identifying Number (PIN). The complete PIN shall be as follows: 89021 - XXX | | | | Drawing Dash number number (see table I) 2. APPLICABLE DOCUME

6、NTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this drawing. This section does not include documents cited in other sections of this drawing or recommended for additional information or as examples. While every effort has been made to ensure the completene

7、ss of this list, document users are cautioned that they must meet all specified requirements of documents in sections 3 and 4 of this drawing, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbo

8、oks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2). DEPARTMENT OF DEFENSE SPECIFICATIONS MIL-PRF-39018 - Capacitors, Fixed, Electrolytic (Aluminum Oxide), Established Rel

9、iability, and Non-established Reliability, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-1285 - Marking of Electrical and Electronic Parts. (Copies of these documents are available online at http:/quicksearch.dla.mil/or from the Standardization Document Order Desk, 700 Robbins A

10、venue, Building 4D, Philadelphia, PA 19111-5094.) 2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, su

11、persedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Interface and physical dimensions. The interface and physical dimensions shall be as specified in MIL-PRF-39018 and herein (see figure 1). 3.1.1 Terminals. Terminals shall be solder-coated, so

12、lid wire leads (see figure 1). 3.1.1.1 Pure tin. The use of pure tin, as an underplate or final finish is prohibited both internally and externally. Tin content of capacitor components and solder shall not exceed 97 percent, by mass. Tin shall be alloyed with a minimum of 3 percent lead, by mass (se

13、e 6.3). 3.1.2 Case. Case shall be made with insulated tubular metal. 3.1.3 Operating and storage temperature range. The operating and storage temperature range shall be -55C to +105C. 3.1.4 Insulating sleeves. Insulating sleeves shall meet the requirements of MIL-PRF-39018. Provided by IHSNot for Re

14、saleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89021 REV E PAGE 3 TERMINAL CODE D NOTES: 1. Dimensions are millimeters. 2. Inches equivalents are given for general information only. 3. The th

15、ird lead (NC) should be connected to an isolated printed circuit board foil pad. FIGURE 1. Case dimensions and configuration. TERMINAL CODE J TERMINAL CODE O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH

16、IO SIZE A CODE IDENT NO. 14933 DWG NO. 89021 REV E PAGE 4 Dimensions (in millimeters) Case code D max L max Lead space S 0.5 T Lead diameter Nom (AWG no.) CC CD CG DG DM DT DS EK EN ER FR FV 10.5 10.5 10.5 13.0 13.0 13.0 13.0 16.5 16.5 16.5 18.5 18.5 16.1 18.8 23.2 23.2 29.6 35.9 45.5 27.9 36.0 40.0

17、 40.0 43.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 N/A N/A N/A 2.5 2.5 2.5 2.5 3.8 3.8 3.8 3.8 3.8 .635 .635 .635 .813 .813 .813 .813 .813 .813 .813 .813 .813 22 22 22 20 20 20 20 20 20 20 20 20 mm inch mm inch mm inch 0.635 0.813 1.6 2.5 3.8 5.0 7.1 7.5 9.5 .025 .032 .063 .098 .150 .197 .28

18、0 .295 .374 10.5 13.0 16.1 16.5 18.5 18.8 20 23.2 .413 .512 .634 .650 .728 .740 .787 .913 25 27.9 29.6 35.9 36.0 40.0 43.0 45.5 .984 1.098 1.165 1.413 1.417 1.575 1.693 1.791 FIGURE 1. Case dimensions and configuration - Continued. 3.2 Electrical characteristics. 3.2.1 Rated voltage. The rated volta

19、ge shall be in accordance with table I. 3.2.2 Dielectric. The dielectric shall be aluminum oxide in accordance with MIL-PRF-39018. 3.2.3 Capacitance. Nominal capacitance shall be within -10 percent, +100 percent of the value shown in table I at +25C, measured at 120 Hz and 1.0 V rms maximum. 3.2.4 E

20、quivalent series resistance (ESR). Equivalent series resistance at 120 Hz shall not exceed the values shown in table I at +25C, when measured with a maximum of 1.0 V rms applied. ESR at 10 kHz is shown in table I. 3.2.5 DC leakage current. DC leakage current shall not exceed values determined at +25

21、C: I = .03 CV after 1-minute charge or I = .01 CV after 2-minute charge. Where: I = leakage current in A. V = rated voltage in volts. C = capacitance in F. 3.2.6 Ripple current. Capacitors shall withstand the rms ripple current at 40 kHz and +105C (see table I). 3.2.7 Life. One hundred percent of ra

22、ted voltage applied at +105C for 3,000 hours (2,000 hours for 10.5 mm diameter case sizes). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89021 REV E PAGE 5 3.2.8 Re

23、verse voltage. Not applicable. 3.2.9 Reverse voltage aging. Not applicable. 3.2.10 Stability at reduced and high temperature. In accordance with MIL-PRF-39018. 3.3 Environmental characteristics. 3.3.1 Altitude operation. The altitude operation shall not exceed 70,000 feet. 3.3.2 Shelf test. Capacito

24、rs shall be subjected to a shelf test at +105C for 1,000 hours. No voltage shall be applied. After test, capacitors shall be removed from the test chamber and stabilized at room temperature. 3.4 Physical characteristics. 3.4.1 Terminal strength. Terminals shall meet the twist and lead pull test requ

25、irements of MIL-PRF-39018. 3.5 Marking. Marking shall be in accordance with MIL-STD-1285, except the PIN shall be as specified in 1.2 with the manufacturers name or CAGE code and date code. 3.6 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally pref

26、erable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.7 Manufacturer eligibility. To be eligible for listing as an approved source of supply,

27、a manufacturer shall be listed in the MIL-PRF-39018 Qualified Products Database for at least one part, or perform the group A and group B inspections of MIL-PRF-39018 on a sample of parts agreed upon by the manufacturer and DLA Land and Maritime-VAT. 3.8 Certificate of compliance. A certificate of c

28、ompliance shall be required from manufacturers requesting to be an approved source of supply. 3.9 Workmanship. The capacitor shall be uniform in quality and free from any defects that will affect life, serviceability, or appearance. 4. VERIFICATION 4.1 Qualification inspection. Qualification inspect

29、ion is not required. 4.2.1 Inspection of product for delivery. Inspection of product for delivery shall consist of the groups A and B inspections of MIL-PRF-39018 4.2.2 Certification. The acquiring activity, at its discretion, may accept a certificate of compliance with group B inspections instead o

30、f performing group B inspection (see 6.2c). 4.2.3 Inspection of packaging. Inspection of packaging shall be in accordance with MIL-PRF-39018. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE I

31、DENT NO. 14933 DWG NO. 89021 REV E PAGE 6 TABLE I. Electrical characteristics. DSCC drawing 89021- Capacitance (F) Maximum ESR (ohms) at +25C Maximum ripple 40 kHz, +105C (amps) Maximum impedance 100 kHz, +25C (ohms) Case code Terminal code 120 Hz 40 kHz 6.3 V dc, 9 V dc surge 001 002 003 004 005 00

32、6 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 330 470 1,000 1,000 1,000 1,500 1,500 1,500 2,200 2,200 2,200 3,300 3,300 3,300 3,300 3,300 3,300 4,700 4,700 4,700 6,800 6,800 6,800 0.540 0.340 0.200 0.200 0.200 0.110 0.110 0.110 0.110 0.110 0.110 0.067 0.067 0.067 0.078 0.078

33、0.078 0.066 0.066 0.066 0.054 0.054 0.054 0.213 0.133 0.071 0.071 0.071 0.060 0.060 0.060 0.041 0.041 0.041 0.031 0.031 0.031 0.037 0.037 0.037 0.029 0.029 0.029 0.024 0.024 0.024 0.36 0.49 0.83 0.83 0.83 0.73 0.73 0.73 1.36 1.36 1.36 1.67 1.67 1.67 1.58 1.58 1.58 2.02 2.02 2.02 2.33 2.33 2.33 0.213

34、 0.132 0.070 0.070 0.070 0.059 0.059 0.059 0.045 0.045 0.045 0.032 0.032 0.032 0.040 0.040 0.040 0.031 0.031 0.031 0.026 0.026 0.026 CC CD DG DG DG DM DM DM EK EK EK DS DS DS EN EN EN FR FR FR FV FV FV D D D J O D J O D J O D J O D J O D J O D J O 10 V dc, 13 V dc surge 024 025 026 027 028 029 030 0

35、31 032 033 034 035 036 037 038 039 040 041 042 043 044 220 330 470 1,000 1,000 1,000 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 4,700 4,700 4,700 5,600 5,600 5,600 0.550 0.350 0.235 0.120 0.120 0.120 0.115 0.115 0.115 0.075 0.075 0.075 0.085 0.085 0.085 0.070 0.070 0.070 0.060 0.060 0.060

36、 0.215 0.135 0.092 0.062 0.062 0.062 0.042 0.042 0.042 0.032 0.032 0.032 0.038 0.038 0.038 0.031 0.031 0.031 0.026 0.026 0.026 0.36 0.46 0.63 0.98 0.98 0.98 1.52 1.52 1.52 1.65 1.65 1.65 1.56 1.56 1.56 1.97 1.97 1.97 2.24 2.24 2.24 0.215 0.134 0.090 0.061 0.061 0.061 0.046 0.046 0.046 0.033 0.033 0.

37、033 0.041 0.041 0.041 0.033 0.033 0.033 0.028 0.028 0.028 CC CD CG DM DM DM EK EK EK DS DS DS EN EN EN FR FR FR FV FV FV D D D D J O D J O D J O D J O D J O D J O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTO

38、N, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89021 REV E PAGE 7 TABLE I. Electrical characteristics - Continued. DSCC drawing 89021- Capacitance (F) Maximum ESR (ohms) at +25C Maximum ripple 40 kHz, +105C (amps) Maximum impedance 100 kHz, +25C (ohms) Case code Terminal code 120 Hz 40 kHz 16 V dc, 20

39、V dc surge 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 220 330 470 1,000 1,000 1,000 1,000 1,000 1,000 1,800 1,800 1,800 2,200 2,200 2,200 3,300 3,300 3,300 3,900 3,900 3,900 0.585 0.370 0.250 0.130 0.130 0.130 0.120 0.120 0.120 0.080 0.080 0.080 0.074 0.074 0

40、.074 0.074 0.074 0.074 0.061 0.061 0.061 0.217 0.137 0.098 0.066 0.066 0.066 0.042 0.042 0.042 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.026 0.026 0.026 0.40 0.52 0.70 1.00 1.00 1.00 1.35 1.35 1.35 1.64 1.64 1.64 1.78 1.78 1.78 1.94 1.94 1.94 2.23 2.23 2.23 0.217 0.136 0.094 0.065 0.06

41、5 0.065 0.046 0.046 0.046 0.034 0.034 0.034 0.034 0.034 0.034 0.034 0.034 0.034 0.028 0.028 0.028 CC CD CG DM DM DM EK EK EK DS DS DS ER ER ER FR FR FR FV FV FV D D D D J O D J O D J O D J O D J O D J O 20 V dc, 30 V dc surge 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 08

42、4 085 220 330 470 470 470 680 680 680 1,000 1,000 1,000 1,500 1,500 1,500 2,200 2,200 2,200 3,300 3,300 3,300 0.380 0.270 0.250 0.250 0.250 0.140 0.140 0.140 0.115 0.115 0.115 0.085 0.085 0.085 0.077 0.077 0.077 0.061 0.061 0.061 0.150 0.100 0.077 0.077 0.077 0.067 0.067 0.067 0.048 0.048 0.048 0.03

43、3 0.033 0.033 0.032 0.032 0.032 0.026 0.026 0.026 0.41 0.61 0.45 0.45 0.45 0.96 0.96 0.96 0.78 0.78 0.78 1.63 1.63 1.63 1.80 1.80 1.80 2.25 2.25 2.25 0.148 0.098 0.075 0.075 0.075 0.067 0.067 0.067 0.045 0.045 0.045 0.035 0.035 0.035 0.034 0.034 0.034 0.028 0.028 0.028 CD CG DG DG DG DM DM DM DT DT

44、DT DS DS DS ER ER ER FV FV FV D D D J O D J O D J O D J O D J O D J O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 89021 REV E PAGE 8 TABLE I. Electrical characteri

45、stics - Continued. DSCC drawing 89021- Capacitance (F) Maximum ESR (ohms) at +25C Maximum ripple 40 kHz, +105C (amps) Maximum impedance 100 kHz, +25C (ohms) Case code Terminal code 120 Hz 40 kHz 25 V dc, 35 V dc surge 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 100 220 330 33

46、0 330 470 470 470 1,000 1,000 1,000 1,000 1,000 1,000 2,200 2,200 2,200 0.700 0.300 0.270 0.270 0.270 0.160 0.160 0.160 0.090 0.090 0.090 0.095 0.095 0.095 0.062 0.062 0.062 0.250 0.105 0.078 0.078 0.078 0.067 0.067 0.067 0.034 0.034 0.034 0.039 0.039 0.039 0.026 0.026 0.026 0.32 0.59 0.79 0.79 0.79

47、 0.97 0.97 0.97 1.60 1.60 1.60 1.54 1.54 1.54 2.22 2.22 2.22 0.250 0.100 0.076 0.076 0.076 0.068 0.068 0.068 0.036 0.036 0.036 0.041 0.041 0.041 0.028 0.028 0.028 CC CG DG DG DG DM DM DM DS DS DS EN EN EN FV FV FV D D D J O D J O D J O D J O D J O 40 V dc, 55 V dc surge 103 104 105 106 107 108 109 1

48、10 111 112 113 114 115 116 117 118 119 47 100 330 330 330 470 470 470 680 680 680 1,000 1,000 1,000 1,500 1,500 1,500 0.950 0.580 0.200 0.200 0.200 0.133 0.133 0.133 0.093 0.093 0.093 0.080 0.080 0.080 0.063 0.063 0.063 0.265 0.165 0.068 0.068 0.068 0.046 0.046 0.046 0.035 0.035 0.035 0.033 0.033 0.

49、033 0.027 0.027 0.027 0.28 0.38 0.93 0.93 0.93 1.28 1.28 1.28 1.57 1.57 1.57 1.76 1.76 1.76 2.19 2.19 2.19 0.265 0.165 0.070 0.070 0.070 0.050 0.050 0.050 0.037 0.037 0.037 0.035 0.035 0.035 0.030 0.030 0.030 CC CD DM DM DM EK EK EK DS DS DS ER ER ER FV FV FV D D D J O D J O D J O D J O D J O Provided by