DLA DSCC-DWG-01009 REV B-2009 CONNECTOR PLUG ELECTRICAL RF SERIES BNC FOR LOW SMOKE CABLES.pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated Vendor PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PAG

2、ES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Ron Gary Original date of drawing 20 April 2001 REVISED BY TITLE Lee Surowiec CONNECTOR, PLUG, ELECTRICAL, RF, SERIES BNC, FOR LOW SMOKE CABLES APPROVED BY Rob Heber SIZE CAGE CODE DWG. NO. 010

3、09 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-006 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01009 REV A PAGE 2 NOTES: 1. Dimensions are in inches metric eq

4、uivalents are in parentheses. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series BNC, socket contact interface, in accordance with MIL-STD-348. FIGURE 1. General configuration. Provided by IHSNot for R

5、esaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01009 REV A PAGE 3 ENGINEERING DATA: This document covers the requirements for radio frequency connectors accommodating special low smoke c

6、oaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148, figure 1 herein, and MIL-PRF 39012/17, and accommodate the cables listed in table I, with the following additions and exceptions. Electrical: Shall be in accordance with MIL

7、-PRF-39012/17. Mechanical: Shall be in accordance with MIL-PRF-39012/17. Environmental: Shall be in accordance with MIL-PRF-39012/17. TABLE I. Cable accommodation. Part or Identifying Number (PIN) 1/ 2/ Applicable cable 01009BBSA M17/220-00001 01009BBSB # M17/221-00001 01009BBSC & M17/222-00001 0100

8、9BBSD $ M17/223-00001 01009BBSE % M17/224-00001 01009BBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled using the MIL-C-22520/5 crimp tool and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M22520/5-25 % M22520/5-27 Pr

9、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01009 REV B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. Additional sources will

10、be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply Center Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing PIN Vendor similar PIN

11、1/ Vendor CAGE number 01009BBSA 3190-1143 Superceded by 1010320A001-000 00795 01009BBSB 3190-1164 Superceded by 1010311A001-000 01009BBSC 3190-1186 Superceded by 1010348A001-000 01009BBSD 3190-1191 Superceded by 1010300A001-000 01009BBSE 3190-1208 Superceded by 1010318A001-000 01009BBSF 3190-1213 Su

12、perceded by 1010319A001-000 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-