DLA DSCC-DWG-01011 REV B-2009 CONNECTOR RECEPTACLE ELECTRICAL RF SERIES BNC JAMNUT MOUNTED FOR LOW SMOKE CABLES.pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated the Vendor PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF

2、 PAGES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Ron Gary Original date of drawing 20 April 2001 CHECKED BY TITLE Lee Surowiec CONNECTOR, RECEPTACLE, ELECTRICAL, RF, SERIES BNC, JAMNUT MOUNTED, FOR LOW SMOKE CABLES APPROVED BY Rob Heber S

3、IZE CAGE CODE DWG. NO. 01011 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-008 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01011 REV A PAGE 2 NOTES: 1. Dimensio

4、ns are in inches. Metric equivalents are in parenthesis. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series BNC, socket contact interface, in accordance with MIL-STD-348. 5. Wrench flats to accommodate

5、 STD wrench openings in accordance with FED-STD-H28, appendix 10. FIGURE 1. General configuration. OD Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01011 REV A P

6、AGE 3 ENGINEERING DATA: This document covers the requirements for radio frequency connectors accommodating special low smoke coaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148, figure 1 herein, and MIL-PRF 39012/19, and acco

7、mmodate the cables listed in table I, with the following additions and exceptions. Electrical: Shall be in accordance with MIL-PRF-39012/19. Mechanical: Shall be in accordance with MIL-PRF-39012/19. Environmental: Shall be in accordance with MIL-PRF-39012/19. TABLE I. Cable accommodation. Part or Id

8、entifying Number (PIN) 1/ 2/ Applicable cable 01011BBSA M17/220-00001 01011BBSB # M17/221-00001 01011BBSC & M17/222-00001 01011BBSD $ M17/223-00001 01011BBSE % M17/224-00001 01011BBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled using the MIL-C

9、-22520/5 crimp tool and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M22520/5-25 % M22520/5-27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO.

10、 A 037Z3 01011 REV B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply Center Columbus,

11、ATTN: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing PIN Vendor similar PIN 1/ Vendor CAGE number 01011BBSA (3190-853) Superseded by 1019320A591-000 00795 01011BBSB (3190-1147) Superseded by 1019311A591-000 01011BBSC (3190-1173) Superseded by 1019348

12、A591-000 01011BBSD (3190-1077) Superseded by 1019300A591-000 01011BBSE (3190-1195) Superseded by 1019318A591-000 01011BBSF (3190-863) Superseded by 1019319A591-000 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-