DLA DSCC-DWG-01016 REV B-2009 CONNECTOR RECEPTACLE ELECTRICAL RF SERIES TNC FLANGE MOUNT FOR LOW SMOKE CABLES.pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated Vendors PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PA

2、GES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Ron Gary Original date of drawing 20 April 2001 CHECKED BY TITLE Lee Surowiec CONNECTOR, RECEPTACLE, ELECTRICAL, RF, SERIES TNC, FLANGE MOUNT, FOR LOW SMOKE CABLES APPROVED BY Rob Heber SIZE C

3、AGE CODE DWG. NO. 01016 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-013 .Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01016 REV A PAGE 2 NOTES: 1. Dimensions a

4、re in inches. Metric equivalents are in parenthesis. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series TNC, socket contact interface, in accordance with MIL-STD-348. FIGURE 1. General configuration. E

5、NGINEERING DATA: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01016 REV A PAGE 3 This document covers the requirements for radio frequency connectors accommodat

6、ing special low smoke coaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148, figure 1 herein, and MIL-PRF 39012/29, and accommodate the cables listed in table I, with the following additions and exceptions. Electrical: Shall be

7、 in accordance with MIL-PRF-39012/29. Mechanical: Shall be in accordance with MIL-PRF-39012/29. Environmental: Shall be in accordance with MIL-PRF-39012/29. TABLE I. Cable accommodation. Part or Identifying Number (PIN) 1/ 2/ Applicable cable 01016TBSA M17/220-00001 01016TBSB # M17/221-00001 01016TB

8、SC & M17/222-00001 01016TBSD $ M17/223-00001 01016TBSE % M17/224-00001 01016TBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled using the MIL-C-22520/5 crimp tool and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M2252

9、0/5-25 % M22520/5-27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01016 REV B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. A

10、dditional sources will be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply Center Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing

11、PIN Vendor similar PIN 1/ Vendor CAGE number 01016TBSA (3190-1146) Superseded by 1255320A071-000 00795 01016TBSB (3190-1167) Superseded by 1255311A071-000 01016TBSC (3190-1189) Superseded by 1255348A071-000 01016TBSD (3190-1194) Superseded by 1255300A071 01016TBSE (3190-1211) Superseded by 1255318A0

12、71-000 01016TBSF (3190-1216) Superseded by 1255319A071-000 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-