DLA DSCC-DWG-05012-2007 KIT ASSEMBLY AND DISASSEMBLY CONNECTOR FIBER OPTIC CABLE ASSEMBLY (CECOM DRAWING A3302584)《光缆组件连接器 组装和拆卸试剂盒( CECOM绘画A3302584 )》.pdf

1、 REVISIONS LTR DESCRIPTION DATE APPROVED Prepared in accordance with ASME-Y14.100 Selected item drawing REV REV STATUS OF PAGES PAGES 1 2 3 4 5 6 7 8 PMIC N/A PREPARED BY EUGENE A. EBERT DESIGN ACTIVITY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH CHECKED BY EUGENE A. EBERT APPROVED BY MICHAEL A. RA

2、DECKI TITLE KIT, ASSEMBLY AND DISASSEMBLY, CONNECTOR, FIBER OPTIC CABLE ASSEMBLY (CECOM DRAWING A3302584) SIZE A CODE IDENT. NO. 037Z3 DWG NO. 05012 Original date of drawing 11 May 2007 SCALE REV PAGE 1 OF 8 AMSC N/A 6080-E001 Provided by IHSNot for ResaleNo reproduction or networking permitted with

3、out license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 05012 REV PAGE 2 1. SCOPE 1.1 Scope. This drawing describes the requirements of a fiber optic kit, for assembly, disassembly and repair of connectors on CECOM drawing A3302584. 1.2 Part or Ide

4、ntifying Number (PIN). The complete PIN shall be as follows: 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for add

5、itional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents in sections 3 and 4 of this specification, whether or not they are listed. 2.2 Government documents.

6、2.2.1 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. C

7、ECOM drawing A3302584 Fiber Optic Cable Assemblies (Copies of this drawing are available by email at Charles.Alcottus.army.mil or by calling (732) 532-3741). 3. REQUIREMENTS 3.1 Item requirements. The individual requirements shall be in accordance with table I. 3.2 Recycled, recovered, or environmen

8、tally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.3 Case. Weight

9、including all components: 60 pounds max. Size: 30 inches long max. 30 inches wide max. 15 inches high max. 3.3.1 The case shall include the following characteristics: 3.3.1.1 Cut or molded foam compartments/cushions that protect contents from shock and vibration. 3.3.1.2 A minimum of two (2) hand ho

10、lds that double as tie downs. Each hand hold shall be capable of supporting the entire kit load for two (2) minutes. 3.3.1.3 A hinge having corrosion resistant properties, connecting the two (2) parts of the case (base and cover). 3.3.1.4 A water proof seal such that when closed and latched, the cas

11、e shall be waterproof when subjected to atmospheric conditions. 05012 Drawing number Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 05012 REV PAGE 3 3.3.1.5 A vacuum

12、and pressure relief feature. 3.3.1.6 Corrosion resistant over the center clasps that close and seal the case. 3.3.2 As an option the case may include the following, provided all other requirements are met: 3.3.2.1 Wheels and telescoping handle. 3.4 Certificate of compliance. A certificate of complia

13、nce shall be required from manufacturers requesting to be a suggested source of supply. 3.5 Marking. The case shall be marked with the drawing number, the drawing revision letter, and the manufacturers name or Commercial and Government Entity (CAGE) code and the words “TWO MAN LIFT”. 3.6 Workmanship

14、. The kit shall be uniform in quality and free from any defects that will affect life, serviceability, or appearance. All components of this kit shall be of a robust configuration so as to withstand field use. 4. VERIFICATION 4.1 Design verification. One complete kit shall be subjected to the follow

15、ing sequence of inspections/tests to verify compliance to the design requirements of section 3.3. Records of the design verification shall be maintained by the manufacturer. a. Visual inspection of, case to verify the presence of all components (see table I), that cut or molded foam cushions are in

16、place to protect contents, that there are a minimum of two hand holds, that a vacuum/pressure relief feature is present, and that the top and bottom are connected by a corrosion resistant hinge. b. Open, close and latch the case 5 times and when closed the last time, verify the waterproof seal by ho

17、sing down the case with water for a minimum of 2 minutes (30 seconds on each side). After opening the case and examining the contents, there shall be no evidence of moisture inside the case. c. Close and latch the case and support it by each hand hold for 2 minutes minimum. d. Close and latch the ca

18、se and perform a drop test on each of the four bottom corners (4 drops) from a height of 24 inches minimum from the corner of the case to the dropping surface. After opening the case and examining the contents, there shall be no evidence of damage to any components inside the case 4.2 Conformance in

19、spection. Conformance inspection shall be performed on 100 percent of product produced to this drawing and shall consist of a visual inspection to verify the quantity (see table I) of all components contained within the kit along with proper marking (see 3.4). 5. PACKAGING 5.1 Packaging. For acquisi

20、tion purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of material is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging

21、 requirements are maintained by the Inventory Control Points packaging activities within the Military Service or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files,

22、 CD-ROM products, or by contacting the responsible packaging activity. 6. NOTES (This section contains information of a general or explanatory nature which may be helpful, but is not mandatory.) 6.1 Intended use. This kit is intended to be used for assembly, disassembly and repair of fiber optic con

23、nectors per CECOM drawing A3302584. The kit contains tools and consumable items necessary to accomplish the repairs. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Kit component list. ITEM NO. 1/ NATIONAL STOCK NUMBER 2/ QTY REQD 3/ CLASS 4

24、/ ITEM IDENTIFICATION 5/ CAGE Code 08RC6 Part 6/ CAGE Code 0YMP2 Part 6/ CAGE Code 4HNR0 Part 6/ 1 1 Custom Case (Military Grade see paragraph 3.3) 0400-1185 FSPP-114-00-001 AMCAST-10 2 1 Lid Pouch w/Handle 0700-8062 FKIT052-99-00-002 7/ 3 1 Safety Information Sheet 0100-2000 FSPP-107-00-001 AINFO-0

25、001 4 1 Kit Key for fiber optic kit 0731-1080 FSPP-009-00-001 AINFO-0002 5 6540 01 443 7953 1 Safety Glasses 0700-8810 FSPP-129-00-001 AMSG-01 6 1 Safety Mat 0700-9985 CTMP1600 AMSM-010 7 1 Debris Bottle with Warning Label 0700-9977 FSPP-129-00-001 AMDB-010 8 1 A Masking Tape 3300-6010 CTMP-1600 AMT

26、A-020 9 1 Machinist Rule, 12“ 0701-5020 FSPP-139-00-002 AMR-12 10 6675 01 420 5614 1 Strip Length Template for Lucent ST II 0700-3870 FSST-100011 ATEMP-CN 11 1 Strip Length Template for AMP SC/ST 0100-1040 FSPP-125-00-001 ATEMP-SC-01 11A 1 Strip Length Template for AFSI ST 0700-3870 FSST0015 ATEMP-B

27、N 12 1 Strip Length Template, (AFSI) 0731-1070 FSST0015 ATEMP-0001 13 1 Strip Length Template, (Glenair) 0731-1071 FSST100012 ATEMP-0002 14 1 Strip Length Template, (AOS) 0731-1072 FSST100013 ATEMP-0003 15 1 Strip Length Template, (Delphi) 0731-1073 FSST100014 ATEMP-0004 16 1 Strip Length Template,

28、(QPC) 0731-1074 FSST100015 ATEMP-0005 17 1 Strip Length Template, (STRAN) 0731-1075 FSST100016 ATEMP-0006 18 1 Roll-up Pouch 0700-8050 FSPP-137-00-001 AMTR-PT-010 19 1 Jacket Strip Tool for M85045/8 Cable 0700-3055 FSPP-172-00-001 AMJST-101 19A 5180-01-503-8251 1 A Super Lube 3 oz. tube 0700-5420 FS

29、PP-3141-00-001 AML-010 20 2 Open End Wrench, 5/8“- 3/4“ 0700-4640 FSTP0515 AMWA-010 21 1 Open End Wrench, 13/16“ 0700-4630 FSPP-314-00-002 AMWA-020 22 1 Flare Nut Wrench, 5/16“ 0700-4610 FSTP0514 AMWA-030 23 1 Roll-up Pouch 0700-8045 FSPP-137-00-001 AMCASE-20 24 1 Industrial Kevlar Shears 0700-3315

30、FSPP-108-00-002 AMTKS-101 25 1 Large Plastic Box w/Dividers 0700-9875 FSPP-176-00-003 N/A 26 16 Microclips 0300-4500 FSTP0550 AMOP-0060 27 1 A Marking Pen 1500-9200 FSTP0065 AMMA-010 28 1 Multi-Purpose Strip Tool, FiberSure 0700-3125 FSPP-313-00-001 AJTS-002 29 1 Large Plastic Box, 9 Compartments 07

31、00-9890 FSPP-176-00-004 AMPB-LG 30 1 A Tygon Tubing (12 per PK) 0300-2010 FS7H-100-00-058 AMT-001 31 1 A Instant Adhesive 0700-5045 FSPP-306-01-565 AMTRC-010 See footnotes at end of table. DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIOSIZEAREV CODE IDENT NO. 037Z3 PAGE 4 DWG NO. 05012Provided by IHS

32、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-See footnotes at end of table. TABLE I. Kit component list - Continued. ITEM NO. 1/ NATIONAL STOCK NUMBER 2/ QTY REQD 3/ CLASS4/ ITEM IDENTIFICATION 5/ CAGE Code 08RC6 Part 6/ CAGE Code 0YMP2 Part 6/ CAGE Code 4HNR0 P

33、art 6/ 32 1 MicroStrip Blade Set 0700-3080 FSPP-169-00-002 AMSTM-001 33 1 MicroStrip Heater Oven 0700-3088 FSPP-203-00-001 AMSTM-002 34 1 MicroStrip Buffer Strip Tool Handle Assembly 0700-3076 FSPP-205-00-001 AMSTM-003 35 1 MicroStrip Guide, .040in 0700-3085 FSPP-169-00-003 AMSTM-004 36 1 MicroStrip

34、 AC Power Supply 0700-3089 FSPP-731-00-001 AMSTM-005 37 1 MicroStrip Cleaning Brush 0700-3092 FSPP-201-00-001 AMSTM-006 38 1 MicroStrip Installation & Removal Tool 0700-3090 FSPP-204-00-001 AMSTM-007 39 1 MicroStrip Blade/Die Lock 0700-3091 FSPP-169-00-001 AMSTM-008 40 1 A Lantern Battery, 6V 3900-0

35、200 FSPP-202-00-002 AMSTM-009 41 1 MicroStrip Power Leads for 6V Lantern Battery 0700-3087 FSPP-202-000-001 AMSTM-010 42 8125 01 439 5367 1 Alcohol Dispenser 0700-9750 FSPP-123-00-001 AMAD1 43 10 A Alcohol Soaked Pads 0700-9760 FS-TX811 AMAP2 44 7920 01 321 6791 1 A Wipes, Lint Free, 4“ X 4“, 100/PK

36、 0700-5200 CPSP0001 AMLFW 45 24 A Needle Tip (20 AWG. X 1.5“) 0700-5115 CTMP1311 AMT1 46 24 A Syringe (3CC-3Parts) 0700-5121 CTMP1311 AMS1 47 3 A Epoxy, Mini-Six-Pack, (1 Gram Vial) 0700-5035 CTMP1202 AME-6P 48 1 A Anaerobic Adhesive, FiberSure 0700-3810 CTMP1270 AE-202AP2 49 1 A Anaerobic Primer, F

37、iberSure 0700-3815 CTMP1271 AE-202AP1 50 9505 01 376 9398 1 A Cleaning Wire 0700-3210 CTMP1100 AMCW1 51 1 Tweezers 0700-8911 FSPP-140-002 AMST-01 52 1 Crimp Tool Frame w/AMP Die Set, FiberSure 0700-1875 FSPP-103-11-001 AMCTSC-010 53 1 Crimp Die for Lucent ST II, FiberSure 0700-1850 FSPP-103-00-004 A

38、MCTD-030 54 1 Crimp Tool, Terminus 0701-2001 FSPP-103-11-002 AMCTCT-010 55 1 Small Plastic Box 0700-9870 FSPP-176-00-002 AMPB-SM 56 6070 01 420 0551 12 ST Cure Adapter 0700-1450 FSTF10036 AMOP-0010 57 12 SC Cure Adapter / Terminus Cure Adapter 0700-1455 FSTF10035 AMOP-0020 58 4430 01 419 6383 1 Curi

39、ng Oven 0701-4015 FSPP-145-00-001 AMO-0070 59 6070 01 420 7682 1 Curing Oven Heater Block 0701-4020 FSPP-115-00-005 AMO-0030 60 6070 01 430 4607 1 Curing Oven Cable Stand (Post) 0701-4030 FSPT0600 AMO-0060 61 5365 01 420 3692 1 Curing Oven Cable Stand Ring 0701-4040 FSTP0600 AMO-0040 62 5340 01 422

40、2168 2 Curing Oven Cable Clamp 0701-4060 FSPP-316-00-001 AMO-0050 63 5110 01 419 4360 1 Carbide Scribe, FiberSure 0700-3750 FSTP0010 AMTS-101B 64 1 Eye Loupe-10X 0700-8710 FSPP-173-00-001 AVMM-EL-10X DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIOSIZEAREV CODE IDENT NO. 037Z3 PAGE 5 DWG NO. 05012Prov

41、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIOSIZEAREV CODE IDENT NO. 037Z3 PAGE 6 DWG NO. 05012TABLE I. Kit component list - Continued. ITEM NO. 1/ NATIONAL STOCK NUMBER 2/ QTY REQD 3/ CLASS4/ ITEM IDENTIF

42、ICATION 5/ CAGE Code 08RC6 Part 6/ CAGE Code 0YMP2 Part 6/ CAGE Code 4HNR0 Part 6/ 65 1 Polishing Fixture, ST/SC, Terminus (2.5 MM), DSCC Drawing 04056 0700-1740 FSTF1009 AMPT-010 66 6080-01-377-4502 1 Glass Polishing Plate, 6” 0700-4110 PPSP1106 AMF-GP-010 67 5350-01-420-1454 1 A Polishing Film, 5

43、Micron, AO, 5.5“ X 5.5“, 50 Sheets 0700-2660 FSPP-109-00-001 ACF-5AM 68 1 Polishing Pad, 70 to 90 Durometer, 5 3/4“ X 5 3/4“ 0700-2002 PPSP2000 AMF-PP-010 69 5350-01-376-9388 1 A Polishing Film, 1 Micron, AO, 5.5“ X 5.5“, 50 Sheets 0700-2620 FSPP-119-00-001 AMF-1AM 70 1 Microscope, 200X (Westover, O

44、blique Lighting) 0700-7950 FSPP-130-00-001 AVV400V 71 1 A Polishing Film, 0.5 Micron, Diamond, 5.5“ X 5.5“, 3 Sheet 0700-2804 CPSP3150 ACF-1-203 72 1 A Polishing Film, 0.1 Micron, Diamond, 5.5“ X 5.5“, 3 Sheet 0700-2803 FSPP-112-00-001 ACF-1-1003 73 8125-01-428-8839 1 Water Bottle w/Cap 0700-9700 FS

45、PP-123-00-002 AMWB-010 74 1 Boot Installation Tool for AFSI ST Connector 0701-3070 FSTF0371 AMSTI-010 75 1 A Card Cleaner for Ferrule End Face 0700-5370 FSPP-335-00-001 AMC-020 76 20 Miniature Dust Cover 0700-9815 MSTC-100-00-126 AMD-010 77 1 Fiber Optic Light Source, FiberSure 0700-8500 FSPP-138-00

46、-002 AMLS-020 78 1 Visual Fault Finder 0705-7080 FSPP-315-00-001 HiLite 79 1 Reversible Screwdriver 4300-9010 FSPP-174-00-002 ASC-010 80 1 SCIRT (Spring Compression Insertion & Removal Tool) DSCC Drawing 04055 0731-1132 FSTF0645 AMHT-010 81 1 PIRT (Plate Insertion & Removal Tool) 0700-4625 FSTF10001

47、-1 AMHT-020 82 1 Miniature Reversible Screwdriver 4300-9000 FSPP-174-00-001 ASC-020 83 1 Adjustable Wrench, 8“ 0700-4650 FSTP0601 AMWA-015 84 1 Channel Locks 0700-4700 FSPP-314-00-003 AMHT-030 85 1 Spanner Wrench for receptacle 0700-4620 FSTF0066 AMPH-3520 86 2 Strap Wrench for Backshell 0701-3060 F

48、SPP-143-00-001 AMBG-010 87 1 A Swaging Sleeves, Oval (50/pk) 0204-5060 FS3M-110-00-054 AMSW-010 88 1 Lanyard Crimp Tool 0731-1160 FSTP1005 AMCT-010 89 1 A Thread Lock Adhesive 0700-5020 CTMP1240 AE-105 90 2 Hex Wrench, .05 0745-3030 FSTP0069 AMHW-001 91 2 Hex Wrench, 3/32 0745-3040 FSTP0087 AMWH-002

49、 92 1 Microtip Cleaners, (100/pk) 0701-5201 CPSP004 ACSW-010 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1/ Item Number (column 1). This column specifies a number assigned to each item as it appears in the list. Numbers are assigned in sequence and are for reference only. 2/ National Stock