DLA DSCC-DWG-85022 REV M-2003 CONNECTOR RECEPTACLE ELECTRICAL COAXIAL RADIO FREQUENCY SERIES SMA FOR SEMIRIGID CABLES FLANGE MOUNT《有SMA型半刚性电缆凸缘架射频同轴电缆电容连接器》.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-01-17 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R003-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.85022 9. TITLE OF DOCUMENT Connector, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMA for Semirigid Cables,

6、Flange Mount 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTL b. NEWM 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “M” Revisions description column; add “Changes in accordance with NOR 5935-R003-03”. Revisions date column; ad

7、d “” Revisions rev status of pages, blocks 1, 6 and 7, add “M”. Revisions rev status of sheet 1, add “M”. Sheet 6: Revisions Ltr block, delete “L” and substitute “M” Sheet 6: Add the following new Vendor PIN “ DSCC drawing PIN 1/ Vendor CAGE Vendor reference PIN Number 85022SSG 00779 1051063-1 85022

8、SSG-1 00779 1221162-1 85022SSGA 00779 1051062-1 85022SSGA-1 00779 1051067-1 Sheet 7: Revisions Ltr block, delete “L” and substitute “M” 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be receive

9、d before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e

10、. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 03-01-17 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)03-01-17 DD Form 1695, APR 92 Previous editions are obsolete Sheet 7: Add the following vendor: Vendor CAGE Vendor name Number and

11、 address 00779 TYCO Electronics P. O. Box 3608 Harrisburg PA 17105 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-09-10 Form Appr

12、oved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send

13、 comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Ar

14、lington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING AC

15、TIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R003-02 a. TYPED NAME (First, Middle Initial, Last)

16、 Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.85022 9. TITLE OF DOCUMENT Connector, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMA for Semirigid Cables, Flange Mount 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTK b. NEWL 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCR

17、IPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “L” Revisions description column; add “Changes in accordance with NOR 5935-R003-02”. Revisions date column; add “02-09-10” Revisions rev status of pages, block 1, add “L”. Revisions rev status of sheet 1, add “L”. Sheet 7: Vendor name and address

18、, delete: “Connecting Devices Incorporated and substitute: “Tensolite Company 2400 Grand Avenue 2400 Grand Avenue Long Beach, CA 90815” Long Beach, CA 90815” Sheet 7: Revisions Ltr block, delete “J” and substitute “L” 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supple

19、mented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME

20、(First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 02-09-10 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)02-09-10 DD Form 1695, APR 92 Previous editions

21、are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-01-25 Form Approved OMB No. 0704-0188 Public reporting burden for thi

22、s collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other

23、aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Managemen

24、t and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURI

25、NG ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-E686 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.85022 9. TITLE

26、 OF DOCUMENT Connector, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMA for Semirigid Cables, Flange Mount 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTJ b. NEWK 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “K”

27、 Revisions description column; add “Changes in accordance with NOR 5935-E686”. Revisions date column; add “02-01-25” Revisions rev status of pages, block 1, add “K”. Revisions rev status of sheet 1, add “K”. Sheet 3: Retain the Notes and delete and substitute the following drawing: Revisions rev sta

28、tus of sheet 3, add “K”. 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision a

29、nd furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 02-01-25 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REV

30、ISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)02-01-25 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONSLTR DESCRIPTION DATE APPROVEDA Add note 7 to figure 1, delete hermetic se

31、al, coupling mechanismretention force. Add VSWR for RG405 cable. Add sources 74868 and98291.2 Aug 1985 Randy LarsonB Add source (26805), part number modification. 25 Nov 1985 Randy LarsonC Add footnote to table I to specify that these connectors are captivated. Specify center contact retention. Chan

32、ge vendors part numbers tosupport captive designs.1 May 1986 Randy LarsonD Add source 00795. 24 Apr 1987 Randy LarsonE Remove source 74868. 4 Mar 1988 Randy LarsonF Add figure 1, continued. Add source 98291, 00779, 30990, and 74868. 26 Jun 1989 Randy LarsonG Add 34078 as new source. Editorial change

33、s throughout. 2 Mar 1992 Randy LarsonH Incorporate NOR. 7 July 1993 Randy LarsonJ Part number and source update. Editorial changes throughout. 14 June 2001 Robert HeberPrepared in accordance with MIL-STD-100REVPAGEREVJJJJJJJREV STATUSOF PAGES PAGE 1234567PREPARED BYPMIC GRon GaryDEFENSE SUPPLY CENTE

34、R, COLUMBUSCOLUMBUS, OHIO 43216-5000CHECKED BY TITLEC. W. KoellerAPPROVED BYRandy LarsonCONNECTOR, RECEPTACLE, ELECTRICAL COAXIAL,RADIO FREQUENCY, SERIES SMA FOR SEMIRIGIDCABLES, FLANGE MOUNTSIZE CAGE CODE037Z3DWG. NO.85022Original date ofdrawing12 April 1985AREV J PAGE 1 OF 7AMSC N/A 5935-E641DISTR

35、IBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 85022DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVJPAGE2NOTES:1. Dimensions are in inc

36、hes.2. Metric equivalents are given for general information only.3. Metric equivalents are in parenthesis.4. Unless otherwise specified, all tolerance shall be .005 inch (0.13 mm).5. All undimensioned pictorial configurations are for reference purposes only.6. Dimension .500 (12.70 mm) .020 (0.51 mm

37、) defines the overall length of the connector when assembledto the cables.7. No special tools shall be required for assembly to cables.8. See “Interface, series SMA, socket contact” figure of MIL-STD-348.9. Steel-bodied connectors shall be gold plated at least in the area of solder attachment in acc

38、ordance withMIL-PRF-39012.FIGURE 1. General configuration.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 85022DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVJPAGE3NOTES:1. Dimensions are in inches.2. Metric equi

39、valents are given for general information only.3. Metric equivalents are in parenthesis.4. Unless otherwise specified, all tolerance shall be .005 inch (0.13 mm).5. All undimensioned pictorial configurations are for reference purposes only.6. Dimension .500 (12.70 mm) .020 (0.51 mm) defines the over

40、all length of the connector when assembledto the cables.7. No special tools shall be required for assembly to cables.8. Recommended panel thickness is .090 inch (2.29 mm).9. Gaskets shall be made of either Viton A or equivalent (Viton A is a brand name of E.I. dupont de NemoursCompany).10. See “Inte

41、rface, series SMA, socket contact” figure of MIL-STD-348.11. Steel-bodied connectors shall be gold plated at least in the area of solder attachment in accordance withMIL-PRF-39012.FIGURE 1. General configuration - Continued.Provided by IHSNot for ResaleNo reproduction or networking permitted without

42、 license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 85022DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVJPAGE4ENGINEERING DATA:Nominal impedance: 50 ohms.Frequency range: 0 to 18 GHz.Voltage rating: 500 V rms at sea level (M17/130-RG402).335 V rms at sea level (M17/133-RG405).Operating tempe

43、rature: -65C to +165C.REQUIREMENTS: (Requirements of drawing 84148 are applicable.)Dimensions and configurations: See figure 1 and MIL-STD-348.Force to engage and disengage:Longitudinal force: Not applicable.Torque: 2 inch-pounds, maximum.Coupling proof torque: Not applicable.Hermetic seal: Not appl

44、icable.Leakage (pressurized connectors): Not applicable.Center contact retention: 6 pounds minimum axial force. Not applicable to non-captive contact(85022SSG-1, 85022SSGA-2).Radial torque: Not applicable.Voltage standing wave ratio (VSWR): 1.07 + .005 (F in GHz).Moisture resistance: MIL-STD-202, me

45、thod 106, except step 7b shall be omitted. Resistance shall be 200 megohmswithin 5 minutes after removal from humidity.Contact resistance (in milliohms, maximum):Initial After environmentCenter contact 3.0 4.0Outer contact 2.0 Not applicableOuter conductor to body 0.5 Not applicableDielectric withst

46、anding voltage at sea level: 1000 V rms, minimum.Vibration, high frequency: MIL-STD-202, method 204, test condition D.Corona level: 375 volts, minimum (M17/130-RG402).250 volts, minimum (M17/133-RG405).Altitude: 70,000 feet.Shock (specified pulse): MIL-STD-202, method 213, test condition I.Provided

47、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 85022DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVJPAGE5Thermal shock: MIL-STD-202, method 107, test condition B (except high temperature to be +115C).Barometric pressure

48、(reduced): MIL-STD-202, method 105, test condition C.RF high potential withstanding voltage: 1,000 volts, minimum (M17/130-RG402).670 volts, minimum (M17/133-RG405).Frequency: 5 MHz.Leakage current: Not applicable.Cable retention force: 60 pounds, minimum (M17/130-RG402).30 pounds, minimum (M17/133-RG405).Torque: 55 ounce-inches (M17/130-RG402).16 ounc