DLA DSCC-DWG-85139 REV D-2001 CONNECTOR RECEPTACLE ELECTRICAL COAXIAL RADIO FREQUENCY SERIES SMC PRINTED CIRCUIT BOARD MOUNT STRAIGHT《有直的印刷电路板架SMC系列的射频同轴电缆电气贮器连接器》.pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Add silver plated designs, and source 98291. Editorial changes throughout. 20 Sep 1988 Randy Larson B Change PIN. Editorial changes throughout. 2 Mar 1992 Randy Larson C Frequency range change. PIN change. 22 May 1995 Randy Larson D PIN and source update. 16

2、 November 2001 Robert M. Heber Prepared in accordance with MIL-STD-100 REV PAGE REV D D D D D REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC N/A Ron Gary DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE C. W. Koeller APPROVED BY R. Larson CONNECTOR, RECEPTACLE, ELECTRI

3、CAL, COAXIAL, RADIO FREQUENCY, SERIES SMC, PRINTED CIRCUIT BOARD MOUNT, STRAIGHT SIZE CAGE CODE 037Z3 DWG. NO. 85139 Original date of drawing 17 December 1985 A REV D PAGE 1 OF 5 AMSC N/A 5935-E624 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot fo

4、r ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85139 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 2 ENGINEERING DATA: Nominal impedance: 50 ohms. Frequency range: 0 to 10 GHz. Voltage rating: 335 volts rms, maximum, a

5、t sea level, 85 volts rms, maximum at 70,000 feet. Temperature rating: -65C to +165C. REQUIREMENTS: Requirements of drawing 84148 are applicable. Dimensions and configuration: See figure 1. Force to engage and disengage: Longitudinal force: 14 pounds maximum engage, 2 pounds minimum disengage. Torqu

6、e: Not applicable. Coupling proof torque: Not applicable. Inspection conditions: Not applicable. Hermetic seal: Not applicable. Leakage (pressurized connectors): Not applicable. Insulation resistance: Method 302, test condition B, MIL-STD-202. 1,000 megohms, minimum. Center contact retention: Minimu

7、m axial force: 6.0 pounds from mating end; 4.0 pounds from opposite end. Torque: 3 inch-ounce. Solderability 1/: Method 208 of MIL-STD-202. Salt spray (corrosion): Method 101, test condition B, MIL-STD-202. Voltage standing wave ratio (VSWR): Not applicable. Swept frequency VSWR test setup: Not appl

8、icable. Connector durability: Insertion and withdrawal force: 500 cycles, minimum at 12 cycles/minute, maximum. The mating force shall meet the mating characteristics requirements. Initial: 14 pounds, minimum. Final: 2 pounds, minimum disengagement. 14 pounds, maximum engage and disengage. Contact r

9、esistance (milliohms, maximum): Initial After environment Center contact: 6.0 8.0 Outer contact: 1.0 1.5 Braid to body Not applicable Not applicable _ 1/ For quality conformance inspection, the test shall be performed in group B following VSWR. Provided by IHSNot for ResaleNo reproduction or network

10、ing permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85139 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 3 PIN Dimension A 85139DBG-1 .155 (3.94) .010 (0.25) 85139DBG-2 .125 (3.18) .010 (0.25) 85139DBG-3 .093 (2.36) .010 (0.25) 85139DBS-1 .155 (3.94) .010 (0

11、.25) 85139DBS-2 .125 (3.18) .010 (0.25) 85139DBS-3 .093 (2.36) .010 (0.25) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. All undimensioned pictorial representations are for reference purposes only. 4. Configuration optional. Dimension .375 (9.52 mm) is

12、the maximum envelope diameter. FIGURE 1. General configuration. .Inches mm Inches mm .001 0.02 .100 2.54 .002 0.05 .200 5.08 .003 0.08 .218 5.54 .008 0.20 .367 9.32 .020 0.51 .375 9.52 .038 0.97 .385 9.78 .047 1.19 .435 11.05 .060 1.52 .600 15.24 .067 1.70 Provided by IHSNot for ResaleNo reproductio

13、n or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85139 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 4 Dielectric withstanding voltage: Method 301 of MIL-STD-202. 1,000 volts rms, at sea level. Vibration, high frequency: MIL-STD-202, method 2

14、04, test condition D. Shock (specified pulse): MIL-STD-202 method 213, test condition H. Thermal shock: MIL-STD-202, method 107, test condition B. Moisture resistance: Not applicable. Corona level: Not applicable. RF high potential withstanding voltage: Voltage and frequency: 600 volts rms at 5 MHz.

15、 Leakage current: Not applicable. Cable retention force: Not applicable. Coupling mechanism retention force: Not applicable. RF leakage: Not applicable. Insertion loss: Not applicable. Part or Identifying Number (PIN): 85139DBG-1, 85139DBG-2, 85139DBG-3, 85139DBS-1, 85139DBS-2, and 85139DBS-3 (see t

16、able I). TABLE I. Cross-reference of PINs. Preferred PIN 1/ Superseded PIN 1/ 85139DBG-1 85139DBG-2 85139DBG-3 85139DBGN-1 85139DBGN-2 85139DBGN-3 1/ Superseded parts may be used until stock is exhausted. New part number marking is effecitive as of 20 September 1988. Note: These parts are for use in

17、 general radio frequency applications. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85139 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 5 Approved sources of supply are listed herein. Additional

18、sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DSCC drawing PIN 1/ Vendor CAGE number Vendor reference PIN 85139DBG-1 00795 24931 95077 2568000G00E-000 37JR104-

19、6 2285-0001 85139DBG-2 00795 24931 95077 2568000G00E-001 37JR104-4 2285-0015 85139DBG-3 00795 24931 95077 2568000G00E-002 37JR104-5 2285-0016 85139DBS-1 00795 2568000A00E-000 85139DBS-2 00795 2568000A00E-001 85139DBS-3 00795 2568000A00E-002 1/ Parts must be purchased to this DSCC PIN to assure that

20、all performance requirements and tests are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 24931 Specialty Connector Co. 2100 Earlywood Dr. Franklin, IN 46131 95077 Soliton/Vector Microwave Products 3301 Electronics Way West Palm Beach, FL 33407 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-