DLA DSCC-DWG-86103 REV F-2011 CONTACT RECEPTACLE ELECTRICAL CRIMP TO WIRE (FOR 025 INCH POST).pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Change marking requirement. Add caution note. 22 Sep 1988 R. Marbais B Page, 5, marking; add plating designator explanation. Add a dash to part numbers under approved source of supply. Editorial changes throughout. 31 Jul 1990 R. Marbais C Removed CAGE 22526

2、, added CAGE 80187. Removed tolerance from figure 1. 26 Aug 1996 C. Koeller D Change CAGE 14933 to 037Z3. Updated specifications and standards. Editorial changes throughout. 3 October 2002 R. Heber E Updating references and CAGE (8N187) PINs. Editorial changes throughout. 17 May 2010 Abdo Abdouni F

3、Change plating requirements. 9 February 2011 Abdo Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PAGES REV F F E E E E PAGE 1 2 3 4 5 6 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Gail E. Willis Original date of drawi

4、ng 19 September 1986 CHECKED BY TITLE Carl Dello-Stritto CONTACT, RECEPTACLE, ELECTRICAL, CRIMP TO WIRE (FOR .025 INCH POST) APPROVED BY Richard Marbais SIZE CAGE CODE DWG. NO. 86103 A 037Z3 REV F PAGE 1 OF 6 AMSC N/A 5935-E842-001 CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 HAS CHANGED NAMES TO: DLA LA

5、ND AND MARITIME COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 86103 REV F PAGE 2 REQUIREMENTS: Shall meet the requirements of 86037. De

6、sign and construction: Dimensions and configuration: See figure 1. Material: Body: hard brass. Plating: 30 microinches gold in accordance with ASTM-B488, code C, type 2, class 0.75 over 50 microinches (1.27 m) nickel in accordance with SAE AMS-QQ-N-290 on contact mating area. Gold flash, in accordan

7、ce with ASTM-B488, code C, type 2, over 50 microinches of nickel in accordance with SAE AMS-QQ-N-290 inside the box area and on remainder of the top part and 30 microinches (0.76 m) nickel in accordance with SAE AMS-QQ-N-290 the backside of terminal or 30 microinches gold in accordance with ASTM-B48

8、8, code C, type 2, class 0.75 over 50 microinches (1.27 m) nickel in accordance with SAE AMS-QQ-N-290 on contact area. Gold flash, in accordance with ASTM-B488, code C, type 2, on remainder of contact. Spring: Material: Heat-treated beryllium copper. Plating: Gold flash. Spring thickness: See table

9、I. TABLE I. Spring thickness. Spring thickness Inches (mm) .0065 .0007 .0048 .0007 .0035 .0007 (165 18m) (122 18m) (89 18m) Electrical: Maximum current rating: 3 amperes rms at sea level. Environmental: Operating temperature range: -65C to +125C. Mechanical: Durability: 50 cycles (mating and unmatin

10、g) in accordance with SAE AS39029. Interface: Mates to .025 inch (0.63 mm) square or round pin. Latch housings drawing numbers 86038, 86060, 86108, and 87109 for use with 22 AWG through 32 AWG wire. Pin length: Discrete application: .180 inch (4.57 mm) minimum. Latch housings recommended pin length:

11、 .210 inch (5.33 mm) minimum, .225 .015 inch (5.72 0.38 mm) preferred. Recommended pin plating: 30 inches (0.76m) gold minimum. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG

12、 NO. A 037Z3 86103 REV E PAGE 3 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, all tolerances are .005 (0.13 mm). FIGURE 1. Dimensions and configuration. Inches mm Inches mm .001 .002 .003 .005 .006 .008 .010 .019 .020 0.03 0.

13、05 0.08 0.13 0.15 0.20 0.25 0.48 0.51 .027 .036 .048 .054 .060 .120 .150 .340 .460 0.69 0.91 1.22 1.37 1.52 3.05 3.81 8.64 11.68 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DW

14、G NO. A 037Z3 86103 REV E PAGE 4 Insulation diameter Wire size Application 1/ Discrete Housing Inches Inches 18-20 AWG .042 - .103 .042 - .060 22-26 AWG .036 - .103 .036 - .060 28-32 AWG .028 - .054 .023 - .054 1/ Contacts can be inserted into latch housing or applied directly to post. AWG range Wir

15、e barrel Insulation dia range Insulation barrel A B C D E F 18-20 .104 .104 .021 .042 .103 .139 .120 .050 22-26 .070 .070 .017 .036 .103 .139 .120 .050 28-32 .034 .058 .011 .028 .054 .115 .105 .040 Inches mm Inches mm .0035 .0048 .0065 .011 .017 .021 .028 .034 .036 .040 0.089 0.122 0.165 0.28 0.43 0

16、.53 0.71 0.86 0.91 1.01 .042 .050 .054 .058 .060 .070 .103 .104 .105 .139 1.06 1.27 1.37 1.47 1.52 1.77 2.61 2.64 2.66 3.53 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COL

17、UMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 86103 REV E PAGE 5 Marking: The Part or Identifying Number (PIN) shall be marked on the package and reel (when applicable) in accordance with MIL-STD-1285. The PIN shall include the complete DSCC PIN, manufacturers name or CAGE code, and d

18、ate code. The marking shall be permanent and legible in accordance with method 215 of MIL-STD-202. The PIN shall be constructed using the following format: 86103- XX X X -X Drawing number Wire size Spring thickness Strip or loose Plating Wire size (AWG) Spring thickness (see table I) Strip or loose

19、Plating 18- 18-20 AWG A - .0035 (0.089 mm) S Strip form A Gold 22- 22-26 AWG B - .0048 (0.122 mm) L Loose piece 28- 28-32 AWG C - .0065 (0.165 mm) TABLE II. Recommended spring thickness. Latch housing number of positions Spring thickness Inches (mm) 02-20 10-50 40-72 .0065 .0007 (165 18m) .0048 .000

20、7 (122 18m) .0035 .0007 (089 18m) NOTE: Strip form for OEM use only. For Government use loose piece to be used for stock, store, and issue. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE C

21、AGE CODE DWG NO. A 037Z3 86103 REV E PAGE 6 Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitt

22、ed to DSCC-VAI. DSCC drawing PIN Vendor CAGE number Vendor similar PIN 1/ 86103-18AS-A 8N187 48231000LF-MIL 86103-22AS-A 8N187 48049000LF-MIL 86103-28AS-A 8N187 48048000LF-MIL 86103-18BS-A 8N187 48047000LF-MIL 86103-22BS-A 8N187 48046000LF-MIL 86103-28BS-A 8N187 48045000LF-MIL 86103-18CS-A 8N187 480

23、52000LF-MIL 86103-22CS-A 8N187 48051000LF-MIL 86103-28CS-A 8N187 48050000LF-MIL 86103-18AL-A 8N187 48266000LF-MIL 86103-22AL-A 8N187 48235000LF-MIL 86103-28AL-A 8N187 48238000LF-MIL 86103-18BL-A 8N187 48232000LF-MIL 86103-22BL-A 8N187 48234000LF-MIL 86103-28BL-A 8N187 48237000LF-MIL 86103-18CL-A 8N1

24、87 48233000LF-MIL 86103-22CL-A 8N187 48236000LF-MIL 86103-28CL-A 8N187 48239000LF-MIL 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 8N187 T.T.I 2601 Sylvania Cross Dr. Fort Worth, TX 76137 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-