DLA DSCC-DWG-86112 REV C-2002 CONNECTOR RECEPTACLE ELECTRICAL LATCH HOUSINGS DOUBLE ROW 040- 045 POSTS《0 040-0 045个点双排锁存器座的电气贮器连接器》.pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Change marking requirement. Add caution note. 22 September 1988 R. Marbais B Change marking requirement. 15 May 1990 R. Marbais C Change CAGE 14933 to 037Z3. Editorial changes throughout. 3 October 2002 R. Heber Prepared in accordance with ASME Y14.100 REV P

2、AGE REV C C C C REV STATUS OF PAGES PAGE 1 2 3 4 PREPARED BY PMIC N/A Gail Willis DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Carl Dello-Stritto APPROVED BY Richard Marbais CONNECTOR, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, DOUBLE ROW, .040-.045 POSTS SIZE CAGE CODE 03

3、7Z3 DWG. NO. 86112 Original date of drawing 22 September 1986 A REV C PAGE 1 OF 4 AMSC N/A 5935-E643-26 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Selected item drawing Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

4、-,-,-SIZE CAGE CODE DWG NO. 037Z3 86112 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, all tolerances are .005 (0.13 mm). FIGURE 1. Dimensions and

5、configuration. (SEE TABLE I) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86112 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 3 REQUIREMENTS: Shall meet the requirements of drawing number 86037.

6、Design and construction: Dimensions and configuration: See figure 1. Interface: Receptacle contact part number 75187-004 or 75375-005 (contact manufacturer) contacts crimped to 20 AWG through 32 AWG wire, .200-inch (5.08 mm) centers, .040-.045 inch (1.02-1.15 mm) square or round posts. Temperature r

7、ange: -40C to +105C. Materials: Polyphenylene oxide-based resin and shall meet the flammability requirements of UL 94 V-0. Dielectric withstanding voltage: 1,000 volts rms, 60 Hz, sea level. Contact retention: 6.5 pounds (3 Kg), minimum per position. Marking: The Part or Identifying Number (PIN) sha

8、ll be marked on the housing and package in accordance with MIL-STD-1285. If size, surface conditions, or other design considerations dont allow for full marking on the part, marking on the package is only required. The PIN shall include the complete DSCC PIN, manufacturers name or CAGE code, and dat

9、e code. The marking shall be permanent and legible in accordance with method 215 of MIL-STD 202. The PIN shall be constructed using the follow format: 86112 - XX DSCC drawing Number of positions number (see table I) TABLE I. Number of positions. Number of positions Dimension A (mm) 04 06 08 10 12 14

10、 16 18 20 22 24 26 28 30 32 .348 (8.84) .548 (13.92) .748 (18.99) .948 (24.08) 1.148 (29.16) 1.348 (39.24) 1.548 (39.32) 1.748 (44.40) 1.948 (49.48) 2.148 (54.56) 2.348 (59.64) 2.548 (64.72) 2.748 (69.80) 2.948 (74.88) 3.148 (79.96) Provided by IHSNot for ResaleNo reproduction or networking permitte

11、d without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86112 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 4 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed

12、 to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DSCC drawing PIN Vendor CAGE number Vendor similar PIN 1/ 86112-04 8N187 65113002-MIL 86112-06 8N187 65113003-MIL 86112-08 8N187 65113004-MIL 86112-10 8N187 65113005-MIL 86112-12 8N187 65113006-MIL 86112-14 8N187 651130

13、07-MIL 86112-16 8N187 65113008-MIL 86112-18 8N187 65113009-MIL 86112-20 8N187 65113010-MIL 86112-22 8N187 65113011-MIL 86112-24 8N187 65113012-MIL 86112-26 8N187 65113013-MIL 86112-28 8N187 65113014-MIL 86112-30 8N187 65113015-MIL 86112-32 8N187 65113016-MIL 1/ Caution. Do not use this number for it

14、em acquisition. Items acquired to this number may not satisfy the performance requirements of this drawing. Vendor CAGE Vendor name number and address 8N187 T.T.I 4033 E. Bellknap Street Fort Worth, TX 76111-6600 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-