DLA DSCC-DWG-86116 REV G-2003 CONNECTOR PLUG ELECTRICAL SERIES SSMA PIN CONTACT FOR SEMIRIGID CABLE《针触式SSMA系列的半刚性电缆的电器插头连接器》.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-03-24 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R018-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.86116 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Pin Contact, For Semirigid Cable 10. REVISION LETTER

6、 11. ECP NO.N/A a. CURRENTF b. NEWG 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “G” Revisions description column; add “Changes in accordance with NOR 5935-R018-03”. Revisions date column; add “03-03-24” Revisions rev statu

7、s of pages, blocks 1 and 3, add “G”. Revisions rev status of sheet 1, add “G”. Sheet 3: Revisions Ltr block, delete “D” and substitute “G” Sheet 3: REQUIREMENTS Coupling proof torque, delete “15 inch-pounds, minimum” and substitute “7 inch-pounds, minimum” 14. THIS SECTION FOR GOVERNMENT USE ONLY a.

8、 (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANG

9、E FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)RICHARD L. TAYLOR d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERichard L. Taylor f. DATE SIGNED (YYMMDD) 03-03-24 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)03

10、-03-24 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-01-17 Form Approved OMB

11、 No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comment

12、s regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington,

13、 VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY N

14、UMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R011-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gar

15、y 7. CAGE CODE037Z3 8. DOCUMENT NO.86116 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Pin Contact, For Semirigid Cable 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTE b. NEWF 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr

16、. Column; add “F” Revisions description column; add “Changes in accordance with NOR 5935-R011-03”. Revisions date column; add “” Revisions rev status of pages, blocks 1 and 5, add “F”. Revisions rev status of sheet 1, add “F”. Sheet 5: Revisions Ltr block, delete “E” and substitute “F” Sheet 5: Add

17、the following new Vendor PIN “ DSCC drawing PIN 1/ Vendor CAGE Vendor reference PIN Number 86116ZSG 00779 1045358-1 “ 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufactu

18、rer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert

19、M. Heber f. DATE SIGNED (YYMMDD) 03-01-17 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)03-01-17 DD Form 1695, APR 92 Previous editions are obsolete Sheet 5: Add the following vendor: “ Vendor CAGE Vendor name Number and address 00779 T

20、YCO Electronics P. O. Box 3608 Harrisburg PA 17105 “ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-09-10 Form Approved OMB No. 0

21、704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments rega

22、rding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22

23、202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER

24、LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R007-02 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. C

25、AGE CODE037Z3 8. DOCUMENT NO.86116 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Pin Contact, For Semirigid Cable 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTD b. NEWE 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Colu

26、mn; add “E” Revisions description column; add “Changes in accordance with NOR 5935-R007-02”. Revisions date column; add “02-09-10” Revisions rev status of pages, block 1, add “E”. Revisions rev status of sheet 1, add “E”. Sheet 5: Vendor name and address, delete: “Connecting Devices Incorporated and

27、 substitute: “Tensolite Company 2400 Grand Avenue 2400 Grand Avenue Long Beach, CA 90815” Long Beach, CA 90815” Sheet 5: Revisions Ltr block, delete “D” and substitute “E” 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture.

28、(2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. T

29、ITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 02-09-10 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)02-09-10 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo r

30、eproduction or networking permitted without license from IHS-,-,-REVISIONS LTR DESCRIPTION DATE APPROVED A Modify length dimension. Clarification requirements. 27 Aug 1987 R. Marbais B Add CAGE 34078 and 94375 as sources. 4 Jun 1991 Randy Larson C Add CAGE 24931 and 30990 as sources. 05 Oct 1994 Ran

31、dy Larson D PIN and source update. 16 Nov 2001 Robert M. Heber Prepared in accordance with MIL-STD-100 REV PAGE REV D D D D D REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC N/A Ron Gary DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Jeffery Bohannon APPROVED BY R. Ma

32、rbais CONNECTOR, PLUG, ELECTRICAL, SEREIS SSMA, PIN CONTACT, FOR SEMIRIGID CABLE SIZE CAGE CODE 037Z3 DWG. NO. 86116 Original date of drawing 27 January 1987 A REV D PAGE 1 OF 5 AMSC N/A 5935-E629 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for

33、 ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86116 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalent

34、s are in parentheses. 4. Wrench flats are to accommodate standard wrench opening in accordance with FED-STD-H28, appendix 10. 5. All undimensioned pictorial configurations are for reference purposes only. 6. Dimension .447 .020 (5.33 mm) (0.50 mm) defines the maximum overall length of the connector

35、when assembled to the cable. 7. Method of assembly to the cable shall be solder. 8. Coupling nut is to be passivated corrosion resisting steel in accordance with MIL-PRF-39012. 9. Unless otherwise specified, tolerances are .005 (0.13 mm). FIGURE 1. General configuration. Provided by IHSNot for Resal

36、eNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86116 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 3 ENGINEERING DATA: Nominal impedance: 50 ohms. Frequency range: 0 - 26 GHz. (Connector performance only. Frequency range is d

37、ependent on cable used). Voltage rating: 250 V rms at sea level. 60 V rms at 70,000 feet. Temperature rating: -65C to +165C. REQUIREMENTS: Requirements of drawing 84148 applicable. Dimensions and configuration: See figure 1 and MIL-STD-348. Force to engage and disengage: Longitudinal force: Not appl

38、icable. Torque: 2 inch-pounds, maximum. Coupling proof torque: 15 inch-pounds, minimum. Hermetic seal: Not applicable. Leakage (pressurized connectors): Not applicable. Center contact retention: Not applicable. Radial torque: Not applicable. Voltage standing wave ratio (VSWR): 1.10 + .01F(F in GHz)d

39、B, maximum. Moisture resistance: Method 106, MIL-STD-202, no measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes after removal from humidity. Contact resistance in milliohms, maximum): Initial After environment Center contact: 4.0 4.0 Outer contact: 2.

40、0 Not applicable Outer conductor to body: 0.5 Not applicable Dielectric withstanding voltage at sea level: 750 V rms, minimum. Vibration, high frequency: Method 204, test condition D, MIL-STD-202. Corona level: Altitude: 70,000 feet. 190 V rms, minimum. Shock (specified pulse): Method 213, test cond

41、ition I, MIL-STD-202. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86116 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 4 Thermal shock: Method 107, test condition B, MIL-STD-202, except test high

42、 temperature shall be +85C. Barometric pressure (reduced): Not applicable. RF high potential withstanding voltage: 500 V ms, minimum. Frequency: 5 MHz. Leakage current: Not applicable. Cable retention force: 30 pounds, minimum. Torque: 16 ounce-inches, minimum. Coupling mechanism retention force: 80

43、 pounds, minimum. RF leakage: -90 + F (F in GHz)dB, minimum. Test at a frequency between 2 and 3 GHz. RF insertion loss: .04 F, GHz dB, maximum. Note: These parts are for use in general radio frequency applications. Part or Identifying Number (PIN): See table I. TABLE I. Connector to cable reference

44、. PIN Cable accommodation 86116ZSG M17/133-RG405 M17/133-00001 through -00005 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86116 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV D PAGE 5 Approved sources o

45、f supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DSCC drawing PIN 1/ Vendor CAGE number Vendor reference PIN 24931 40P109-1

46、 30990 3002-135-1SF 34078 SSM-0085-79-001-02 94375 3201-144-124*M1 86116ZSG 95077 SF2701-6005 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 24931 Specialty Connector Co. 2100 Earlywood Dr. Frankli

47、n, IN 46131 30990 Connecting Devices Inc. 2400 Grand Avenue Long Beach, CA 90815 34078 Midwest Microwave 6564 South State Road Saline, MI 48176 94375 Automatic Connector Inc. 400 Moreland Road Commack, NY 11725 95077 Solitron/Vector Microwave Products 3301 Electronics Way West Palm Beach, FL 33407 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-