DLA DSCC-DWG-86118 REV E-2003 CONNECTOR PLUG ELECTRICAL SERIES SSMA RIGHT ANGLE PIN CONTACT FOR SEMIRIGID CABLE《针触式SSMA系列的半刚性电缆的电器插头连接器》.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-03-24 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R021-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.86118 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Right Angle, Pin Contact, For Semirigid Cable 10. RE

6、VISION LETTER 11. ECP NO.N/A a. CURRENTD b. NEWE 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “E” Revisions description column; add “Changes in accordance with NOR 5935-R021-03”. Revisions date column; add “03-03-24” Revisi

7、ons rev status of pages, blocks 1 and 3, add “E”. Revisions rev status of sheet 1, add “E”. Sheet 3: Revisions Ltr block, delete “C” and substitute “E” Sheet 3: REQUIREMENTS Coupling proof torque, delete “Not applicable” and substitute “7 inch-pounds, minimum” 14. THIS SECTION FOR GOVERNMENT USE ONL

8、Y a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE C

9、HANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)RICHARD L. TAYLOR d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERichard L. Taylor f. DATE SIGNED (YYMMDD) 03-03-24 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMD

10、D)03-03-24 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-01-17 Form Approved

11、 OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send com

12、ments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arling

13、ton, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVI

14、TY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R013-03 a. TYPED NAME (First, Middle Initial, Last) Ron

15、 Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.86118 9. TITLE OF DOCUMENT Connector, Plug, Electrical, Series SSMA, Right Angle, Pin Contact, For Semirigid Cable 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTC b. NEWD 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet

16、 1: Revisions Ltr. Column; add “D” Revisions description column; add “Changes in accordance with NOR 5935-R013-03”. Revisions date column; add “” Revisions rev status of pages, blocks 1 and 5, add “D”. Revisions rev status of sheet 1, add “D”. Sheet 5: Revisions Ltr block, delete “C” and substitute

17、“D” Sheet 5: Add the following new Vendor PIN “ DSCC drawing PIN 1/ Vendor CAGE Vendor reference PIN Number 86118ZSG 00779 1045418-1 “ 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received

18、 before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e.

19、 SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 03-01-17 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)03-01-17 DD Form 1695, APR 92 Previous editions are obsolete Sheet 5: Add the following vendor: “ Vendor CAGE Vendor name Number an

20、d address 00779 TYCO Electronics P. O. Box 3608 Harrisburg PA 17105 “ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONS LTR DESCRIPTION DATE APPROVED A Modify length dimension. Clarification requirements. 27 Aug 1987 R. Marbais B Add CAGE 340

21、78 as source. 4 Jun 1991 Randy Larson C PIN and source update. 16 Nov 2001 Robert M. Heber Requirements of DSCC drawing 84148 are applicable. Prepared in accordance with MIL-STD-100 REV PAGE REV C C C C C REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC N/A Ron Gary DEFENSE SUPPLY CENTER, COLUMBU

22、S COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Jeffery Bohannon APPROVED BY Richard Marbais CONNECTOR, PLUG, ELECTRICAL, SERIES SSMA, RIGHT ANGLE, PIN CONTACT, FOR SEMIRIGID CABLE SIZE CAGE CODE 037Z3 DWG. NO. 86118 Original date of drawing 27 January 1987 A REV C PAGE 1 OF 5 AMSC N/A 5935-E631 DISTRI

23、BUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86118 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 2 NOTES: 1. Dimensions

24、are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parentheses. 4. Wrench flats are to accommodate standard wrench opening in accordance with FED-STD-H28, appendix 10. 5. All undimensioned pictorial configurations are for reference purposes only

25、. 6. Dimension .210 (5.33 mm) defines the maximum overall length of the connector when assembled to the cable. 7. Method of assembly to the cable shall be solder. 8. Coupling nut is to be passivated corrosion resisting steel in accordance with MIL-PRF-39012. 9. Unless otherwise specified, tolerances

26、 are .005 (0.13 mm). FIGURE 1. General configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86118 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 3 ENGINEERING DATA: Nominal impedance: 50 oh

27、ms. Frequency range: 0 - 26 GHz. (Connector performance only, frequency range is dependent on cable used.) Voltage rating: 250 V rms at sea level. 60 V rms at 70,000 feet. Temperature rating: -65C to +165C. REQUIREMENTS: Requirements of drawing 84148 applicable. Dimensions and configuration: See fig

28、ure 1 and MIL-STD-348. Force to engage and disengage: Longitudinal force: Not applicable. Torque: 2 inch-pounds, maximum. Coupling proof torque: Not applicable. Hermetic seal: Not applicable. Leakage (pressurized connectors): Not applicable. Center contact retention: Not applicable. Radial torque: N

29、ot applicable. Voltage standing wave ratio (VSWR): 1.15 + .015 (F in GHz)dB, maximum. Moisture resistance: Method 106, MIL-STD-202, no measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes after removal from humidity. Contact resistance (in milliohms, ma

30、ximum): Initial After environment Center contact: 4.0 4.0 Outer contact: 2.0 Not applicable Outer conductor to body: 0.5 Not applicable Dielectric withstanding voltage at sea level: 750 V rms, minimum. Vibration, high frequency: Method 204, test condition D, MIL-STD-202. Corona level: Altitude: 70,0

31、00 feet. 190 V rms, minimum. Shock (specified pulse): Method 213, test condition I, MIL-STD-202. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86118 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 4

32、 Thermal shock: Method 107, test condition B, MIL-STD-202, except test high temperature shall be +85C. Barometric pressure (reduced): Not applicable. RF high potential withstanding voltage: 500 V rms, minimum. Frequency: 5 MHz. Leakage current: Not applicable. Cable retention force: 30 pounds, minim

33、um. Torque: 16 ounce-inches, minimum. Coupling mechanism retention force: 80 pounds, minimum. RF leakage: -60 + F (F in GHz)dB, minimum. Test at a frequency between 2 and 3 GHz. RF insertion loss: .04 F, GHz dB, maximum. Note: These parts are for use in general radio frequency applications. Part or

34、Identifying Number (PIN): See table I. TABLE I. Connector to cable reference. PIN Cable accommodation 86118ZSG M17/133-RG405 M17/133-0001 through -00005 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86118 DEFENSE SUPPLY

35、 CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 5 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI.

36、 DSCC drawing PIN 1/ Vendor CAGE number Vendor reference PIN 34078 SSM-0085-80-001-02 86118ZSG 95077 SF2712-6001 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 34078 Midwest Microwave 6564 South State Road Saline, MI 48176 95077 Solitron/Vector Microwave Products 3301 Electronics Way West Palm Beach, FL 33407 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-