DLA DSCC-DWG-87011 REV E-2005 RESISTOR CHIP FIXED FILM ZERO OHM STYLE 1010《1010型零欧姆涂膜的固定片状电阻器》.pdf

1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Add new vendors. 21 July 88 D. MOORE B Revise section 4. Editorial changes throughout. 10 Dec 91 D. MOORE C Add Vendor. Editorial changes throughout. 11 Aug 99 D. ARPS D Modify PIN to include termination material. Add new paragraphs 3.4 and 6.3. DoD policy

2、corrections throughout. 12 Dec 02 K. A. COTTONGIM E Inactive for new design. Revise to present DoD policy requirements. 12 Apr 05 Kendall A. Cottongim CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OH 43218-3990 Notice of Inactivation for Ne

3、w Design DSCC Drawing 87011 is inactive for new design and is no longer used, except for replacement purposes. Use MIL-PRF-32159/10 Prepared in accordance with ASME Y14.100 Selected item drawing REV STATUS OF PAGES REV E E D E E PAGES 1 2 3 4 5 PMIC N/A PREPARED BY Allan R. Knox DESIGN ACTIVITY: DEF

4、ENSE ELECTRONIC SUPPLY CENTER DAYTON, OH 45444-5000 Original date of drawing CHECKED BY David W. Withrow TITLE RESISTOR, CHIP, FIXED, FILM, ZERO OHM, STYLE 1010 29 June 1987 APPROVED BY David E. Moore SIZE A CODE IDENT. NO. 14933 DWG NO. 87011 REV E PAGE 1 OF 5 AMSC N/A 5905-E528 Provided by IHSNot

5、for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONIC SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 87011 REV E PAGE 2 1. SCOPE 1.1 Scope. This drawing describes the requirements for a zero ohm, chip resistor with wrap-around terminals, st

6、yle 1010. 1.2 Part or Identifying Number (PIN). The complete PIN is as follows: 87011 -B | | | | Drawing Number Termination material (see 3.4 however, each unit package shall be marked in accordance with MIL-STD-1285 and include the PIN as specified herein (see 1.2), the manufacturers name or Commer

7、cial and Government Entity (CAGE) code, date, and lot codes. 3.6 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and ma

8、intenance requirements, and promotes economically advantageous life cycle costs. 3.7 Certificate of compliance. A certificate of compliance shall be required from manufacturers requesting to be a suggested source of supply. 3.8 Workmanship. Resistors shall be processed in such a manner as to be unif

9、orm in quality and parts shall be free from any defects that will affect life, serviceability, or appearance. 4. VERIFICATION 4.1 Qualification inspection. Qualification inspection is not applicable to this document. 4.2 Reliability assurance program. The reliability assurance provisions specified i

10、n MIL-PRF-55342 and maintained in accordance with MIL-STD-790 are not applicable to this document. 4.3 Product level qualification. Product level qualification specified in MIL-PRF-55342 and MIL-STD-690 is not applicable to this document. 4.4 Conformance inspection. 4.4.1 Inspection of product for d

11、elivery. Inspection of product for delivery shall consist of the group A inspections (ER level only) of MIL-PRF-55342. 4.4.1.1 Group A inspection. Group A inspection (ER level) shall be in accordance with MIL-PRF-55342. PPM testing and verification as specified in MIL-PRF-55342 are not applicable to

12、 this document. 5. PACKAGING 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging

13、activity to ascertain requisite requirements. Packaging requirements are maintained by the Inventory Control Points packaging activities within the Military Service or Defense Agency, or within the Military Services System Command. Packaging data retrieval is available from the managing Military Dep

14、artments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONIC SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG

15、 NO. 87011 REV E PAGE 5 6. NOTES (This section contains information of a general or explanatory nature, which may be helpful, but is not mandatory.) 6.1 Intended use. Resistors conforming to this drawing are intended for use when military specifications do not exist and qualified military devices th

16、at will perform the required function are not available for the OEM application. 6.2 Ordering data. The contract or purchase order should specify the following: a. Complete PIN (see 1.2). b. Requirements for delivery of one copy of the conformance inspection data or certificate of compliance that pa

17、rts have passed conformance inspection with each shipment of parts by the manufacturer. c. Requirements for packaging and packing. 6.3 PIN supersession. The PIN in the original 87011 and revision C has been superseded by a new PIN in revision D that includes a code for termination material. Table I

18、illustrates a generic PIN substitution: TABLE I. PIN supersession. Revisions through C Revision D 87011 87011-B 6.4 Users of record. Coordination of this document for future revisions is coordinated only with the approved sources of supply and the users of record of this document. Requests to be add

19、ed as a recorded user of this drawing may be achieved online at Resistordla.mil or in writing to: DSCC-VAT, 3990 East Broad Street, Columbus, OH 43218-3990 or by telephone (614) 692-0552 or DSN 850-0552. 6.5 Suggested sources of supply. Approved sources of supply are listed herein. Additional source

20、s will be added as they become available. Assistance in the use of this drawing may be obtained online at Resistordla.mil or contact DSCC-VAT, 3990 East Broad Street, Columbus, OH 43218-3990 or by telephone (614) 692-0552 or DSN 850-0552. DSCC drawing PIN 87011-* Vendor similar part number 1/ Vendor

21、 CAGE Vendor name and address Termination B. J1248-0R02Y 50316 Mini-Systems Inc. Thick Film Division P.O. 69 North Attleboro, MA 02761-0069 Termination B, G, U, and C. H1010CP*000(D87011) 56235 State of the Art , Inc. 2470 Fox Hill Road State College, PA 16803-1797 Termination B. M1010XR000SB 57489

22、Vishay Thin Films Inc. 2160 Liberty Drive Niagara Falls, NY 14304-3727 Termination B. RCWPM1100-99 91637 Vishay Dale 1122 23rd Street P.O. Box 609 Columbus, NE 68602-0609 1/ Parts must be purchased to the DSCC PIN to assure that all performance requirements and tests are met. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-