DLA DSCC-DWG-87036 REV D-2001 CONNECTOR RECEPTACLE ELECTRICAL SERIES SMA FEEDTHROUGH HERMETIC《 密封穿心式SMA型电机贮器连接器》.pdf

1、REVISIONSLTR DESCRIPTION DATE APPROVEDA Add source 00795. 6 Jul 1987 Randy LarsonB Add 34078 as new source. Editorial changes throughout. 2 March 1992 Randy LarsonC Incorporate NOR. 10 Nov 1994 Randy LarsonD Part number and source update. Editorial changes throughout. 14 June 2001 Robert HeberPrepar

2、ed in accordance with MIL-STD-100REVPAGEREVDDDDDREV STATUSOF PAGES PAGE 12345PREPARED BYPMIC N/ARon GaryDEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OHIO 43216-5000CHECKED BY TITLEC. W. KoellerAPPROVED BYRandy LarsonCONNECTOR, RECEPTACLE, ELECTRICAL, SERIESSMA, FEEDTHROUGH, HERMETICSIZE CAGE CODE037Z3DW

3、G. NO.87036Original date ofdrawing5 March 1987AREV D PAGE 1 OF 5AMSC N/A 5935-E641-01DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 87036DEFE

4、NSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE2NOTES:1. Dimensions are in inches.2. Metric equivalents are given for general information only.3. Metric equivalents are in parenthesis.4. All undimensioned pictorial configurations are for reference purposes only.5. Unless otherwise specif

5、ied, all tolerances shall be .005 (0.13 mm).FIGURE 1. General configuration.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 87036DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE3ENGINEERING DATA:Nominal imped

6、ance: 50 ohms.Frequency range: 0 to 18 GHz.Voltage rating:600 V rms at sea level.150 V rms, maximum at 70,000 feet.Operating temperature: -65C to +105C.REQUIREMENTS: (Requirements of drawing 84148 are applicable.)Dimensions and configurations: See figure 1.Force to engage and disengage:Longitudinal

7、force: Not applicable.Torque: 2 inch-pounds, maximum.Coupling proof torque: Not applicable.Hermetic seal: Leakage shall not exceed 1 x 10 5cubic centimeters per second of tracer gas at atmosphericpressure when mounted in mounting hole.Leakage (pressurized connectors): Not applicable.Center contact r

8、etention: 6 pounds, minimum axial force.Radial torque: Not applicable.Voltage standing wave ratio (VSWR): 1.05 + .01 F (F in GHz) from dc to 18 GHz.Moisture resistance: MIL-STD-202, method 106, except step 7b shall be omitted. No measurements at highhumidity.Contact resistance (in milliohms, maximum

9、):Initial After environmentCenter contact 10.0 10.0Outer contact 2.0 Not applicableDielectric withstanding voltage: 1000 V rms, minimum at sea level.Vibration, high frequency: MIL-STD-202, method D.Corona level:Altitude: 70,000 feet, 375 volts, minimum.Shock: MIL-STD-202, method 202. The acceleratio

10、n shall be 200 Gs.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 87036DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE4Thermal shock: MIL-STD-202, method 107, test condition A.Radio frequency high potential

11、withstanding voltage:500 volts at 5 MHz.Leakage: Not applicable.Radio frequency leakage: -90 dB from 0 to 8 GHz.Radio frequency insertion loss: 0.10 dB maximum at 6 GHz.Barometric pressure (reduced): MIL-STD-202, method 105, test condition C. The connector shall not exhibitbreakdown (corona) when th

12、e applied voltage is 250 volts rms at 70.000 feet.Application: This connector is used in general radio frequency application.Part or Identifying Number (PIN): 87036SSG.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 87036DE

13、FENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE5Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as theybecome available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate ofcompliance

14、has been submitted to DSCC-VAI.DSCC drawingPIN1/VendorCAGEnumberVendorreferencePIN00795 1321000K948-00034078 SMA-7100-32-001-0064639 22 SMA-50-0-687036SSG95077 2975-60251/ Parts must be purchased to this DSCC PIN to assure thatall performance requirements and tests are met.Vender CAGE Vendor namenum

15、ber and address00795 Delta Electronics416 Cabot StreetBeverly, MA 0191534078 Midwest Microwave6564 South State RoadSaline, MI 4817664639 Micro-Coax Components, IncorporatedP.O. Box ECollegeville, PA 19426-099295077 S/V Microwave Products3301Electronics WayWest Palm Beach, FL 33407Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-