DLA DSCC-DWG-88047 REV C-2002 CONNECTOR RECEPTACLE ELECTRICAL COAXIAL RF SERIES SMA FOR SEMIRIGID CABLES JAM NUT MOUNT《SMA系列接半硬电缆 安全螺母射频同轴插座连接器》.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-09-10 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R009-02 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.88047 9. TITLE OF DOCUMENT Connector, Receptacle, Electrical, Coaxial, RF, Series SMA for Semirigid Cables, Jam Nut Mount

6、 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTB b. NEWC 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “C” Revisions description column; add “Changes in accordance with NOR 5935-R009-02”. Revisions date column; add “02-09-10”

7、 Revisions rev status of pages, block 1, add “C”. Revisions rev status of sheet 1, add “C”. Sheet 4: Vendor name and address, delete: “Connecting Devices Incorporated and substitute: “Tensolite Company 2400 Grand Avenue 2400 Grand Avenue Long Beach, CA 90815” Long Beach, CA 90815” Sheet 4: Revisions

8、 Ltr block, delete “B” and substitute “C” 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make

9、 above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 02-09-10 15a. ACTIVITY ACCOMPLISHING REVISI

10、ONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)02-09-10 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONSLTR DESCRIPTION DATE APPROVEDA Incorporate NOR. 10 Nov 1

11、994 Randy LarsonB Part number and source update. Editorial changes throughout. 14 June 2001 Robert HeberPrepared in accordance with MIL-STD-100REVPAGEREVBBBBREV STATUSOF PAGES PAGE 1234PREPARED BYPMIC GRon GaryDEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OHIO 43216-5000CHECKED BY TITLEC. W. KoellerAPPRO

12、VED BYRichard MarbaisCONNECTOR, RECEPTACLE, ELECTRICAL, COAXIAL,RF, SERIES SMA FOR SEMIRIGID CABLE, JAM NUTMOUNTEDSIZE CAGE CODE037Z3DWG. NO.88047Original date ofdrawing26 Jun 1989AREV B PAGE 1 OF 4AMSC N/A 5935-E641-04DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

13、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 88047DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVBPAGE2Inches mm Inches mm.005 0.13 .230 5.84.048 0.40 .236 5.99.055 1.40 .250 6.35.065 1.65 .312 7.92.075 1.91 .

14、340 8.64.103 2.62 .375 9.53.850 21.59NOTES:1. Dimensions are in inches.2. Metric equivalents are given for general information only.3. Unless otherwise specified, all tolerances shall be .005 inch (0.13 mm).4. Wrench flats to accommodate standard wrench opening in accordance with FED-STD-H28, append

15、ix 10.5. All undimensioned pictorial configurations are for reference purposes only.6. Dimension .850 (21.59 mm) maximum defines the overall length of the connector when assembledto the cable.7. Gaskets shall be made of either Viton A or equivalent (Viton A is a brand name of E.I. dupont de NemoursC

16、ompany).8. See “Interface, series SMA, socket contact” figure of MIL-STD-348.9. Steel-bodied connectors shall be gold plated at least in the area of solder attachment in accordance withMIL-PRF-39012.10. Receptacle recommended for component part use on panels with .080 (2.03 mm) maximum thickness.FIG

17、URE 1. General configuration.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 88047DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVBPAGE3REQUIREMENTS: (DSCC drawing 84148 is applicable.)Dimensions and configuration

18、s shall be in accordance with MIL-PRF-39012/83, category E, with the exceptionsshown on figure 1 herein.Electrical: Shall be in accordance with MI-PRF-39012/83 with the following exceptions: VSWR for non-captive designs shall be 88047SSG-1: 1.05 + .005F (GHz).88047SSGA-1: 1.07 + .005F (GHz).Mechanic

19、al: Shall be in accordance with MIL-PRF-39012/83.Environmental: Shall be in accordance with MIL-PRF-39012/83.Part or Identifying Number(PIN) 1/Applicable cable88047SSG 2/88047SSG-1M17/130-RG40288047SSGA 2/88047SSGA-1M17/133-RG4051/ Connectors shall accommodate all cables on referencedspecification.2

20、/ These connectors have captive contacts.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 88047DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVBPAGE4Approved sources of supply. Approved sources of supply are listed

21、 herein. Additional sources will be added as theybecome available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate ofcompliance has been submitted to DSCC-VAI.DSCC drawingPIN1/VendorCAGEnumberVendorreferencePIN88047SSG 30990950775289-135-1CC2942-603488047

22、SSGA 30990950775289-135-2CC2946-604588047SSG-1 30990 5289-135-388047SSGA-1 30990 5289-135-41/ Parts must be purchased to this DSCC PIN to assure thatall performance requirements and tests are met.Vender CAGE Vendor namenumber and address30990 Connecting Devices, Incorporated2400 Grand StreetLong Beach, CA 9081595077 S/V Microwave Products3301 Electronics WaysWest Palm Beach, FL 33407Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-