DLA DSCC-DWG-89015 REV D-2004 CONNECTOR ACCESSORIES ELECTRICAL ADAPTER SHRINK BOOT RFI EMI 45 DEG CATEGORY 3C (FOR MIL-DTL-38999 SERIES I AND II)《45摄氏度下射频和电磁干扰电连接器缩小硬件3C类连接器附件(用于M.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 04-05-07 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R024-03 a. TYPED NAME (First, Middle Initial, Last)Jeffery Tunstall 7. CAGE CODE037Z3 8. DOCUMENT NO.89015 9. TITLE OF DOCUMENT CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 CATEGORY 3C (FOR M

6、IL-DTL-38999 SERIES I AND II 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTC b. NEWD 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISION Page 2, figure 1: Relocate “W” dia leader to show inside dimension braid not outside dimension. a. (X one) X (1) Existing documen

7、t supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYP

8、ED NAME (First, Middle Initial, Last)Richard L. Taylor d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERichard L. Taylor f. DATE SIGNED (04-05-07) 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Jeffery Tunstall c. DATE SIGNED (04-05-07)DD Form 1695, APR 92 Previous

9、editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONS LTR DESCRIPTION DATE APPROVED A Add source 06090. 28 Feb 91 Richard Marbais B Add dimension “Z”. Editorial changes throughout. 22 Sept 93 Randy Larson C Update format. Co

10、rrecting references. Correcting address list of sources. 16 July 02 Robert Heber Prepared in accordance with ASME Y14.100 REV PAGE REV C C C C C C REV STATUS OF PAGES PAGE 1 2 3 4 5 6 PREPARED BY PMIC N/A Jeffery Tunstall DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Abd

11、o Abdouni APPROVED BY Robert Heber CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 CATEGORY 3C (FOR MIL-DTL-38999 SERIES I AND II) SIZE CAGE CODE 037Z3 DWG. NO. 89015 Original date of drawing 25 Sept 89 A REV C PAGE 1 OF 6 AMSC N/A 5935-E657 Provided by IHSNot for ResaleNo repro

12、duction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 89015 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 2 FIGURE 1. Dimensions and configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

13、-,-,-SIZE CAGE CODE DWG NO. 037Z3 89015 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 3 Z dia Cable accommodation range W dia + .020 (0.51) Min Max 01 .250 (6.35) .425 (10.80) .560 (14.22) 02 .312 (7.92) .487 (12.37) .630 (16.00) 03 .375 (9.53) .550 (13.97) .690 (17.53) 04 .43

14、8 (11.13) .613 (15.57) .750 (19.05) 05 .500 (12.70) .675 (17.15) .820 (20.83) 06 .562 (14.27) .737 (18.72) .890 (22.61) 07 .625 (15.88) .800 (20.32) .950 (24.13) 08 .688 (17.48) .863 (21.92) 1.020 (25.91) 09 .750 (19.05) .925 (23.50) 1.120 (28.45) 10 .812 (20.62) .987 (25.07) 1.200 (30.48) 11 .875 (

15、22.23) 1.050 (26.67) 1.270 (32.26) 12 .938 (23.83) 1.090 (27.69) 1.260 (32.00) 13 1.000 (25.40) 1.175 (29.85) 1.370 (34.80) 14 1.125 (28.58) 1.300 (33.02) 1.470 (37.34) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

16、nse from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 89015 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 4 Dash number A dia max E max F max Max cable accommodation -08 .75 (19.1) .690 (17.53) 1.710 (43.43) 01 -10 .85 (21.6) .720 (18.23) 1.770 (44.96) 03 -12 1.00 (25.4) .740 (18.80)

17、1.830 (46.48) 05 -14 1.15 (29.2) .760 (19.30) 1.920 (48.79) 07 -16 1.25 (31.8) .790 (20.07) 2.030 (51.56) 09 -18 1.40 (35.6) .926 (23.52) 2.220 (56.83) 10 -20 1.55 (39.4) .926 (23.52) 2.220 (56.83) 12 -22 1.65 (41.9) 1.020 (25.90) 2.370 (60.20) 13 -24 1.85 (47.0) 1.020 (25.90) 2.370 (60.200 14 NOTES

18、: 1. Dimensions are in inches. 2. Metric equivalents are for information only. 3. Metric equivalents are in parentheses. 4. Dimensions apply after plating. 5. Shield termination method optional. FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or network

19、ing permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 89015 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 5 REQUIREMENTS: Shall be in accordance with MIL-C-85049, category 3c. Design and construction: See figure 1. Interface dimensions shall conform to MIL-DT

20、L-38999 series I and II. Pull test: With backshell suitably clamped, the braid shall withstand a tensile load of 150 pounds without movement of the braid or clamping device. Electrical resistance: When measured with a 4-terminal bridge at room temperature, the resistance will not exceed 1 milliohm.

21、The measurement being taken shall be from a point on the braid within 1 inch of the adapter and a point the body of the adapter. Thermal aging: After being subjected to a temperature of 150C for 168 hours, the electrical resistance, measured as above, will not exceed 1 milliohm. Material and finish:

22、 Accessory components shall be as shown in table I. TABLE I. Material and finish. Components Material Finish All metal parts Aluminum alloy in accordance with MIL-C-85049 See MIL-C-85049 N, W 1/ Braided shield Copper Tin O-ring In accordance with MIL-C-85049 1/ N is electroless nickel in accordance

23、with MIL-C-85049 (for space application only). Part or Identifying Number (PIN): The PIN shall be in accordance with the following: 89015- 10 W 03- 06 Drawing number Dash number Finish Cable Length (1 inch accommodation increments, minimumrange 6 inches)Marking: Marking shall be in accordance with M

24、IL-C-85049 except the PIN shall be as stated above. Application: Use to adapt SAE-AS31091 and SAE-AS31171 type shrink boots. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 89015 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS,

25、OH 43216-5000 A REV C PAGE 6 QUALIFICATION Qualification inspection: Qualification inspection for the backshells specified herein shall not be required. Quality conformance inspection: Quality conformance inspection shall be in accordance with MIL-C-85049. Inspection of packaging: Inspection of pack

26、aging shall be accordance with MIL-C-85049. Method of inspection: Method of inspection shall be accordance with MIL-C-85049. Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed herein have agreed to t

27、his drawing and a certificated of compliance has been submitted to DSCC-VAI. CAGE codes DSCC drawing PIN 06324 07418 31461 06090 89015-xxxxx-xx 1/ 319FB001 S1738-xxxxAxxx-xxx E4032Axxxxxxxx55 TXR41AX45-xxxxA12J 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements a

28、nd tests are met. Vendor CAGE Vendor name number and address 06090 Tyco/Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025-1164 06324 Glenair, Incorporated 1211 Air Way Glendale, CA 91201-2497 07418 Sunbank Electronics, Incorporated 1740 Commerce Way Paso Robles, CA 93446 31461 Electro Adapter, Incorporated 20640 Nordhoff Street Chatsworth, CA 91311 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-