DLA DSCC-DWG-89030 REV E-2002 CONNECTOR ELECTRICAL PLUG COAXIAL RADIO FREQUENCY SERIES TNC PIN CONTACT HEX NUT CORROSION RESISTANT STEEL《系列TNC插针接触件六角螺母防锈钢同轴射频插头连接器》.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-09-10 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R010-02 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.89030 9. TITLE OF DOCUMENT Connector, Electrical, Plug, Coaxial, Radio Frequency, Series TNC, Pin Contact, Hex Nut, Corro

6、sion Resistant Steel 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTD b. NEWE 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “E” Revisions description column; add “Changes in accordance with NOR 5935-R010-02”. Revisions date co

7、lumn; add “02-09-10” Revisions rev status of pages, block 1, add “E”. Revisions rev status of sheet 1, add “E”. Sheet 8: Vendor name and address, delete: “Connecting Devices Incorporated and substitute: “Tensolite Company 2400 Grand Avenue 2400 Grand Avenue Long Beach, CA 90815” Long Beach, CA 90815

8、” Sheet 8: Revisions Ltr block, delete “D” and substitute “E” 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master

9、 document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 02-09-10 15a. ACTIVITY

10、ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)02-09-10 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONSLTR DESCRIPTION DATE APPROVEDA Add s

11、ource 00795. Format changes. 27 Mar 1990 CottongimB Delete source 30990. Editorial changes throughout. 14 Feb 1991 C. KoellerC Incorporate NOR. 2 Aug 1993 Randy LarsonD Part number and source update. Editorial changes throughout. 14 June 2001 Robert HeberPrepared in accordance with MIL-STD-100REVPAG

12、EREVDDDDDDDDREV STATUSOF PAGES PAGE 12345678PREPARED BYPMIC N/ARon GaryDEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OHIO 43216-5000CHECKED BY TITLEC. W. KoellerAPPROVED BYC. W. KoellerCONNECTOR, ELECTRICAL, PLUG, COAXIAL, RADIOREQUENCY, SERIES TNC, PIN CONTACT, HEX NUT,CORROSION RESISTANT STEELSIZE CAGE

13、 CODE037Z3DWG. NO.89030Original date ofdrawing12 July 1989AREV D PAGE 1 OF 8AMSC N/A 5935-E641-07DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037

14、Z3 89030DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE2FIGURE 1. General configuration.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89030DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE3NO

15、TES:1. Dimensions are in inches.2. Metric equivalents are given for general information only.3. Metric equivalents are in parentheses.4. A polyolefin sleeve in accordance with MIL-I-23053/5 shall be supplied with each part.5. Dimension .650 (16.51 mm) is the largest overall diameter of the connector

16、.6. Wrench flats to accommodate standard wrench opening in accordance with FED-STD-H28, appendix 10.7. All undimensioned pictorial configurations are for reference purposes only.8. Dimension 1.500 (38.10 mm) maximum defines the overall length of the connector when assembled to the cable.9. No specia

17、l tools shall be required for assembly to cables.10. Assembly of these connectors shall be in accordance with MIL-PRF-39012, category C. The shield terminationshall be accomplished using the M22520/5-01 basic crimp tool with die and hex dimensions in accordance withMIL-C-22520/5, see table I.11. Con

18、nector coupling nuts and bodies shall be passivated in accordance with ASTM-A967 or SAE-AMS-QQ-P-35.12. Series TNC pin contact in accordance with MIL-STD-348.13. Gasket material shall be Viton A or equivalent (Viton A is a brand name of E.I. DuPont).FIGURE 1. General configuration Continued.Provided

19、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89030DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE4Inches mm.010.156.343.437.5930.253.968.7111.1015.06NOTES:1. Dimensions are in inches.2. Metric equivalents are giv

20、en for general information only.FIGURE 2. Cable strip dimensions.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89030DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE5TABLE I. Cable accommodation.Part or Iden

21、tifyingNumber (PIN)Cable M17/ Hex dimension(mm)MIL-C-22520/5dies89030TSP-189030TSPA-1111-RG303 M22520/5-19, closure B*M22520/5-05, closure A89030TSP-289030TSPA-260-RG142.213(5.41)M22520/5-11, closure AM22520/5-57, closure A89030TSP-389030TSPA-329-RG59 .255(6.47)M22520/5-19, closure A*M22520/5-07, cl

22、osure AM22520/5-13, closure AM22520/5-59, closure A89030TSP-489030TSPA-4113-RG316 .128(3.25)M22520/5-35, closure BM22520/5-03, closure A*Preferred crimp die.Cable retention force. The cable retention force shall be in accordance with MIL-PRF-39012 and meet the followingvalues:89030TSP-189030TSPA-189

23、030TSP-489030TSPA-410 pounds minimum axial pull(44.5 N)89030TSP-289030TSPA-220 pounds minimum axial pull(88.9 N)89030TSP-389030TSPA-330 pounds minimum axial pull(133.4 N)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89030

24、DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE6ENGINEERING DATA:Nominal impedance: 50 ohms.Frequency range: DC to 11 GHz.Voltage rating: 500 volts rms maximum at sea level;125 volts rms at 70,000 feet.Operating temperature: -65C to +165C.REQUIREMENTS: (The requirements of DSCC drawi

25、ng 84148 are applicable.)Dimensions and configurations: See figure 1 herein and MIL-STD-348.Force to engage and disengage: 2 inch-pounds maximum torque (.225 Nm).Coupling proof torque: 15 inch-pounds minimum (1.69 Nm).Hermetic seal: Not applicable.Leakage: Not applicable.Center contact retention: 6

26、pounds minimum axial force (26.69 N).Voltage standing wave ratio (VSWR): The VSWR, when measured in accordance with MIL-PRF-39012 over afrequency range of 500 MHz to 11 GHz, or approximately 80 percent of the cables upper cutoff frequency, whicheveris lower, shall not exceed 1.30:1 when measured at

27、50 ohms.Moisture resistance: Method 106 of MIL-STD-202, except no measurement at high humidity. Insulation resistanceshall be at least 200 megohms within 5 minutes after removal from humidity chamber.Insulation resistance: Methods 302, test condition B of MIL-STD-202, 5,000 megohms, minimum.Connecto

28、r durability: 500 cycles minimum, at 12 cycles per minute maximum. The connector shall meet the matingcharacteristics and force to engage and disengage requirements.Dielectric withstanding voltage: 1,500 V rms, in accordance with method 301 of MIL-STD-202, minimum at sea level.Random vibration: Meth

29、od 2005, test condition V, test level F of MIL-STD-1344.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89030DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE7Contact resistance (in milliohms maximum):Initial

30、After environmentalCenter contact: 1.5 2.0Outer contact: 2.0 N/AOuter cable braid to body: 5.0 N/AVibration, high frequency: Method 204, test condition B of MIL-STD-202, except the method of mounting shall beapproved by the DSCC-VQ. No discontinuity shall be permitted.Shock: MIL-STD-202, test condit

31、ion I of method 213.Thermal shock: MIL-STD-202, test condition B of method 107 except test high temperature shall be +200C.Corona level: 375 V rms, at 70,000 feet (21.336 km).Altitude: The connector shall operate as specified herein at altitudes up to and including 70,000 feet (21.336 km).Salt spray

32、: Method 101, test condition B of MIL-STD-202.RF high potential withstanding voltage: 1,000 V rms, minimum.Frequency: 5 to 7.5 MHz.Leakage current: Not applicable.Coupling mechanism retention force: 100 pounds, minimum (444.8 N).RF leakage: -60 dB, minimum tested between 2 and 3 GHz.RF insertion los

33、s:89030TSP-1 through 4 0.18 dB maximum at 9 GHz0.06 F(GHz) dB maximum from 3 to 6 GHz89030TSPA-1 through 4 0.21 dB maximum at 9 GHz0.07 F(GHz) dB maximum from 3 to 6 GHzProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89030D

34、EFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVDPAGE8Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as theybecome available. The vendors listed herein have agreed to this drawing and a certificate of compliance has beensubmitted t

35、o DSCC-VAI.DSCC drawingPIN1/VendorCAGENumberVendorreferencePIN89030TSP-1 0079530990950771203051K00E-0009023-135-1CCSFSF4008-601789030TSP-2 00795950771203043K00E-000SF4008-601889030TSP-3 00795950771203020K00E-000SF4008-601989030TSP-4 00795950771203053K00E-000SF4008-602089030TSPA-1 00795950771207051K0

36、0E-000SF4093-601889030TSPA-2 00795950771207043K00E-000SF4093-601989030TSPA-3 00795950771207020K00E-000SF4093-602089030TSPA-4 00795950771207053K00E-000SF4093-60211/ Parts must be purchased to this DSCC PIN to assure thatall performance requirements and tests are met.Vender CAGE Vendor namenumber and

37、address00795 Delta Electronics416 Cabot StreetBeverly, MA 0191530990 Connecting Devices, Incorporated2400 Grand AvenueLong Beach, CA 9081595077 Solitron/Vector Microwave Products3301 Electronics WayWest Palm Beach, FL 33407Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-