DLA DSCC-DWG-89043 REV F-2002 CONNECTOR HARDWARE CAP SERIES SMA《系列SMA硬件盖帽连接器》.pdf

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-09-10 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R011-02 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.89043 9. TITLE OF DOCUMENT Connector, Hardware, Cap, Series SMA 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTE b. NEWF 12

6、. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “F” Revisions description column; add “Changes in accordance with NOR 5935-R011-02”. Revisions date column; add “02-09-10” Revisions rev status of pages, block 1, add “F”. Revision

7、s rev status of sheet 1, add “F”. Sheet 4: Vendor name and address, delete: “Connecting Devices Incorporated and substitute: “Tensolite Company 2400 Grand Avenue 2400 Grand Avenue Long Beach, CA 90815” Long Beach, CA 90815” Sheet 7: Revisions Ltr block, delete “E” and substitute “F” 14. THIS SECTION

8、 FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY

9、AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 02-09-10 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DA

10、TE SIGNED (YYMMDD)02-09-10 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REVISIONSLTR DESCRIPTION DATE APPROVEDA Add sources 00795 and 74868. Editorial changes throughout. 19 April 1990 CDSB Verif

11、y counterbore dimension. 05 March 1991 C. W. KoellerC Figure 1 - changed dimension .300 .002 to .310/.298. 10 September 1992 Randy LarsonD Add source 30990. 22 August 1995 Randy LarsonE PIN source update. 3 August 2001 Robert HeberPrepared in accordance with MIL-STD-100.REVPAGEREVEEEEREV STATUSOF PA

12、GES PAGE 1234PREPARED BYPMIC N/ARon GaryDEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OHIO 43216-5000CHECKED BY TITLEC. W. KoellerAPPROVED BYCarl Dello-StrittoCONNECTOR, HARDWARE, CAP, SERIES SMASIZE CAGE CODE037Z3DWG. NO. 89043Original date ofdrawing28 April 1989AREV E PAGE 1 OF 4AMSC N/A 5935-E641-16DI

13、STRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89043DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVEPAGE2Configuration AFIGURE 1. Ge

14、neral configuration.Inches mm Inches mm.0010 0.025 .130 3.30.001 0.03 .156 3.96.002 0.05 .160 4.06.006 0.15 .1793 4.554.010 0.25 .2500 6.350.015 0.38 .250 6.35.016 0.41 .258 6.55.017 0.43 .298 7.57.030 0.76 .310 7.87.067 1.70 .312 7.92.100 2.54 .330 8.38.116 2.94Provided by IHSNot for ResaleNo repro

15、duction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89043DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVEPAGE3Configuration BNOTES:1. Dimensions are in inches.2. Metric equivalents are given for general information only.3. Unless otherwise specified, to

16、lerances are .005 inch (0.12 mm).4. Wrench flats to accommodate standard wrench opening in accordance with FED-STD-H28, appendix 10.5. All undimensioned pictorial configurations are for reference purposes only.6. Threads shall be in accordance with FED-STD-H28.7. Configuration A or B optional.8. Min

17、imum counterbore dimension to meet 1000 V rms dielectric withstanding voltage test when mated.FIGURE 1. General configuration - Continued.Inches mm Inches mm.0010 0.025 .130 3.30.001 0.03 .156 3.96.002 0.05 .160 4.06.006 0.15 .1793 4.554.010 0.25 .2500 6.350.015 0.38 .250 6.35.016 0.41 .258 6.55.017

18、 0.43 .298 7.57.030 0.76 .310 7.87.067 1.70 .312 7.92.100 2.54 .330 8.38.116 2.94Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZECAGE CODE DWG NO.037Z3 89043DEFENSE SUPPLY CENTER, COLUMBUSCOLUMBUS, OH 43216-5000AREVEPAGE4ENGINEERING DATA:REQUIREM

19、ENTS: (Requirements of DSCC drawing 84148 are applicable).Design and construction: Shall be in accordance with figure 1.Corrosion: Applicable.After exposure, hardware shall be washed, shaken, and lightly brushed as specified in method 101 of MIL-STD-202, and thenpermitted to dry for 24 hours at +40C

20、. Hardware shall then be examined for evidence of corrosion, pitting, and ease ofcoupling.Durability: Applicable.Insulation resistance: Not applicable.RF leakage: The RF leakage shall not exceed -40 dB from dc to 10 GHz. The RF leakage shall not exceed -20 dB from 10GHz to 18 GHz. Caps shall be in t

21、he mated condition.Force to engage and disengage: 10 inch-pounds, maximum. Caps shall keep connector interfaces free from dust andmoisture.Part or Identifying Number (PIN). 89043ZSP.Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as theybeco

22、me available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate ofcompliance has been submitted to DSCC-VAI.DSCC drawingPIN 1/Vendor CAGEnumberVendor referencePIN00795 1332000K00A-00289043ZSP30990 5300-135-1SF1/ Parts must be purchased to this DSCC PIN to a

23、ssure that allperformance requirements and tests are met.Vendor CAGE Vendor namenumber and address00795 Delta Electronics416 Cabot StreetBeverly, MA 0191530990 Connecting Devices, Inc2400 Grand AveLong Beach, CA 90815Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-