DLA DSCC-DWG-89077 REV B-2006 CONNECTORS ELECTRICAL INSERT ARRANGEMENT MINIATURE TWENTY SIZE 20 SINGLE CONTACTS WITH ONE SIZE 8 CONTACT CAVITY《插入管理微型二十号20次信号接触带一号8次接触能力的连接器》.pdf

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Delete “part number” and substitute “Part or Identifying Number (PIN)”. Vendor CAGE 60563, PIN, delete and substitute new PIN. Editorial changes throughout. 01-01-22 Robert M. Heber B Add Vendor CAGE SW884, delete MIL-STD-1344 test methods, add EIA-364 test

2、procedures 06-01-20 Richard L. Taylor Prepared in accordance with ASME-Y14.100 REV PAGE REV B A A B B REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC G Ralph Antonelli DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 CHECKED BY TITLE Carl Dello-Stritto APPROVED BY Charles W. Koeller CON

3、NECTORS, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, TWENTY SIZE 20 SIGNAL CONTACTS, WITH ONE SIZE 8 CONTACT CAVITY SIZE CAGE CODE 037Z3 DWG. NO. 89077 Original date of drawing 31 July 1990 A REV B PAGE 1 OF 5 AMSC N/A 5935-E772-000 Provided by IHSNot for ResaleNo reproduction or networking permitted

4、 without license from IHS-,-,-SIZE CAGE CODE DWG NO. Engaging face (pin) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerance for three place decimals is .005 (0.13 mm). 4. All dimensions are true position (TP). 5. Contact

5、 holes in insert shall be located on TP within a 0.005 (0.13 mm) diameter circle. 6. Markings are shown for the pin insert front. Socket inserts are the opposite. 7. Reference documents shall be of the issue in effect on date of invitations for bid. 037Z3 89077 DEFENSE SUPPLY CENTER, COLUMBUS COLUMB

6、US, OH 43218-3990 A REVA PAGE2 FIGURE 1. Insert arrangement, twenty size 20 signal contacts, with one size 8 contact cavity. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. ENGINEERING DATA: Voltage rating: 500 volts rms at sea

7、 level. Operating temperature: -55to +125C. REQUIREMENTS: (Requirements of drawing 85039 and MIL-DTL-24308 are applicable). Dimensions and configurations: See figure 1. Signal contact specifications: Style A: (crimp removable signal contacts) Socket: M39029/63-368. Pin: M39029/64-369. Style B: (sold

8、er fixed signal contacts) Socket: MIL-DTL-24308, Appendix B, figure B-1. Pin: MIL-DTL-24308, Appendix B, figure B-2. Shell size: Three. Shell specifications: Style A: Socket: MIL-DTL-24308/2, figure 1. Pin: MIL-DTL-24308/4, figure 1. Style B: Socket: MIL-DTL-24308/1, figure 1. Pin: MIL-DTL-24308/3,

9、figure 1. Tools: Connectors with crimp removable signal contacts shall be designed for contact insertion and removal with the applicable military tools as follows: Contact size Tool PIN 20 M81969/39-01 with plastic tip M81969/1-02 with metal tip Mating and unmating forces with signal contacts only i

10、nstalled (pounds): See table I. TABLE I. Mating and unmating forces. Mating Unmating Contact type min max Min max Signal 0.770 13.10 0.770 7.7 037Z3 89077 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 A REVA PAGE3 Provided by IHSNot for ResaleNo reproduction or networking permitted without

11、 license from IHS-,-,-SIZE CAGE CODE DWG NO. Contact resistance: See table II. TABLE II. Contact resistance (millivolts maximum). 1/ Contact class G, D, M, N Contact size AWG Wire size Test current (amperes) After salt spray All other 20 24 20 3.0 7.5 55 65 45 55 1/ Not applicable to crimp or shield

12、ed contacts. Dielectric withstanding voltage: See table III. TABLE III. Dielectric withstanding voltage. Altitude Humidity condition All other conditions Sea level 70,000 ft 600 - 1,000 325 Vibration: Test procedure EIA364-28, test condition IV. Temperature cycling: Test procedure EIA364-32, conditi

13、on 1, 5 cycles, except temperature shall be -55C to +125C. 037Z3 89077 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 A REVB PAGE4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. Approved sources of supply are listed h

14、erein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. Vendor similar PIN 1/ DSCC drawing PIN 2/ 3/ 4/ 5/ CAGE 71468 CAGE 60563 CAGE 28198 CAGE SW884

15、89077GBEPT 89077GBEST 89077GBEPR 89077GBESR DBMMY21W1PA101 DBMMY21W1SA101 DBMM21W1PA101 DBMM21W1SA101 P211PSA2D P211RSA2D P211PSA2 P211RSA2 CBM21W1M02F00C-0 CBM21W1F02F00C-0 CBM21W1M02000C-0 CBM21W1F02000C-0 PBMMHW21W1P PBMMHW21W1S PBMMW21W1P PBMMW21W1S 1/ Caution. Do not use this number for item ac

16、quisition. Items acquired to this number may not satisfy the performance requirements of this drawing. 2/ Connectors supplied to this drawing shall include a full compliment of signal contacts. 3/ Size 8 contacts should be ordered separately. 4/ Size 8 contacts are snap in and removable. 5/ For size

17、 8 contacts, see DSCC drawings 89046 and 89061. Vendor CAGE Vendor name number and address 28198 Positronics Industries, Incorporated 423 North Campbell Springfield, MO 65801-8247 60563 The Phoenix Company 555 Pond Drive Wood Dale, IL 60191-1192 71468 ITT Cannon P.O. Box 929 666 East Dyer Road Santa

18、 Ana, CA 92702-0929 SW884 The Phoenix Company of Chicago, Mexico Carretera Internacional K M 1969 Guadalajara Nogales KM 2 Empalme, Mexico 85340 037Z3 89077 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 A REVB PAGE5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-