DLA MIL-DTL-13220 3-2008 GRAB HOOK EYE.pdf

1、 MIL-DTL-13220/3 INCH - POUND25 September 2008 DETAIL SPECIFICATION SHEET GRAB HOOK, EYE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-

2、DTL-13220. BDCAFIGURE 1. Grab hook. AMSC N/A FSC 4030 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13220/3 2 Dimensions and configurations: See figure 1. Hook Dimension Code Chain size A B C D WLL W 1/4 3.03 (76.96) 0.35 (8.89) 2.00 (50.8)

3、 0.52 (13.21) 1,500 X 5/16 4.05 (102.87) 0.45 (11.43) 2.22 (56.39) 0.64 (16.26) 2,000 Y 3/8 4.75 (120.65) 0.50 (12.7) 2.55 (64.77) 0.72 (18.29) 2,500 Z 1/2 6.25 (158.75) 0.65 (16.51) 3.35 (85.09) 0.93 (23.62) 3,600 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information o

4、nly. 3. Chain size relates to the size of the chain to be used. 4. Work load limit (WLL) in pounds is recommended weight limit for safe. 5. Metal and finish: Cast or forged steel hooks with zinc finish in accordance with ASTM B633, type 6. CRES steel hooks with passivation finish in accordance with

5、SAE-AMS2700. FIGURE 1. Grab hook Continued. Referenced documents. In addition to MIL-DTL-13220, this document references the following: ASTM B633 SAE-AMS2700 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 DLA - CC Review activities: (Project 4030-2008

6、-010) Army - MI Navy - AS, CG, MCAir Force - 50, 70, 71, 85 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.milProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-