DLA MIL-DTL-22641 16 H-2010 ADAPTERS COAXIAL TO WAVEGUIDE (SERIES N TO WAVEGUIDE - CLASS 1).pdf

1、AMSC N/A FSC 5985 MIL-DTL-22641/16H 9 March 2010 SUPERSEDING MIL-DTL-22641/16G 31 January 2000 DETAIL SPECIFICATION SHEET ADAPTERS, COAXIAL TO WAVEGUIDE (SERIES N TO WAVEGUIDE - CLASS 1) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirem

2、ents for acquiring the adapters described herein shall consist of this document and the latest issue of MIL-DTL-22641. FIGURE 1. Configuration for PIN M22641/16-01 through M22641/16-22. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D

3、TL-22641/16H 2 FIGURE 2. Configuration for PIN M22641/16-23 through M22641/16-30. REQUIREMENTS: Design, construction, and physical dimensions: See figures 1 and 2 and table I. Frequency range: See table I. VSWR: See table I. VSWR over 50 percent frequency range shall be VSWR measured over any contin

4、uous frequency band of width equal to 50 percent of the entire frequency range, chosen at the discretion of the tester. RF insertion loss: See table I. Radio frequency connector: The coaxial connector shall be compatible and mate with series N plug in accordance with MIL-PRF-39012/1. Flange, wavegui

5、de: See table I. Housing, waveguide: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-22641/16H 3 TABLE I. Adapters, coaxial to waveguide (class I - series N to waveguide). Dash number Figure Frequency range (GHz) VSWR over entire

6、 frequency range 5/ 6/ VSWR over 50 percent frequencyrange 5/ 6/ RF insertionloss (dB) max 6/ Waveguidehousing 7/ Flange 3/ Dimensions 1/ 2/ Waveguideand flange material A (max) B (max) C (max) 01 1 7.05 - 10.0 1.25:1 1.20:1 .10 M85/1-069M85/1-073RG-51/U M3922/53-002UG-51/U Cover 3/ 2.197 (55.80) 2.

7、250 (57.15) - Copper alloy 02 1 5.85 - 8.2 1.25:1 1.20:1 .10 M85/1-063M85/1-067RG-50/U M3922/55-001UG-344/U Cover 3/ 2.500 (63.50) 2.375 (60.33) - Copper alloy 03 1 3.95 - 5.85 1.25:1 1.20:1 .10 M85/1-051M85/1-055RG-49/U M3922/57-002UG-149A/U Cover 3/ 3.687 (93.65) 2.437 (61.90) - Copper alloy 04 1

8、2.6 - 3.95 1.25:1 1.20:1 .10 M85/1-039M85/1-043RG-48/U M3922/56-001UG-53/U Cover 3/ 4.062 (103.17)4.250 (107.95) - Copper alloy 05 1 8.2 - 12.4 1.25:1 1.20:1 .20 M85/1-079M85/1-075RG-52/U M3922/53-001UG-39/U Cover 3/ 2.000 (50.80) 2.218 (56.34) - Copper alloy 06 1 1.7 - 2.6 1.25:1 1.20:1 .05 M85/1-0

9、27M85/1-031RG-104/UM3922/58-009UG-435B/U Contact 3/ 4.125 (104.78)5.000 (127.00) - Copper alloy 07 1 1.12 - 1.7 1.25:1 1.20:1 .05 M85/1-015M85/1-017RG-69/U M3922/58-007UG-417B/U Contact 3/ 5.250 (133.35)7.250 (184.15) - Copper alloy 08 1 4.9 - 7.O5 1.25:1 1.20:1 .10 M85/1-057M85/1-061RG-343/UM3922/5

10、2-037UG-1354/U Contact 3/ 2.000 (50.80) 2.000 (50.80) - Copper alloy 09 1 7.05 - 10.0 1.25:1 1.20:1 .10 M85/1-071RG-68/U M3922/53-004UG-138/U Cover 3/ 2.197 (55.80) 2.250 (57.15) - Aluminum alloy See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted with

11、out license from IHS-,-,-MIL-DTL-22641/16H 4 TABLE I. Adapters, coaxial to waveguide (class I - series N to waveguide) - Continued. Dash number Figure Frequency range (GHz) VSWR over entire frequency range 5/ 6/ VSWR over 50 percent frequencyrange 5/ 6/ RF insertionloss (dB) max 6/ Waveguidehousing

12、7/ Flange 3/ Dimensions 1/ 2/ Waveguideand flange material A (max) B (max) C (max) 10 1 5.85 -8.2 1.25:1 1.20:1 .10 M85/1-065RG-106/UM3922/55-002UG-441/U Cover 3/ 2.500 (63.50) 2.375 (60.33) - Aluminum alloy 11 1 3.95 - 5.85 1.25:1 1.20:1 .10 M85/1-053RG-95/U M3922/57-001UG-407/U Cover 3/ 3.687 (93.

13、65) 2.437 (61.90) - Aluminum alloy 12 1 2.6 - 3.95 1.25:1 1.20:1 .10 M85/1-041RG-75/U M3922/56-002UG-584/U Cover 3/ 4.062 (103.17)4.250 (107.95) - Aluminum alloy 13 1 8.2 - 12.4 1.25:1 1.20:1 .20 M85/1-077RG-67/U M3922/53-003UG-135/U Cover 3/ 2.000 (50.80) 2.218 (56.34) - Aluminum alloy 14 1 1.7 - 2

14、.6 1.25:1 1.20:1 .10 M85/1-029RG-105/UM3922/58-010UG-437B/U Contact 3/ 4.125 (104.78)5.000 (127.00) - Aluminum alloy 15 1 1.12 - 1.7 1.25:1 1.20:1 .05 M85/1-018RG-103/UM3922/58-008UG-418B/U Contact 3/ 5.250 (133.35)7.250 (184.15) - Aluminum alloy 16 1 4.9 - 7.05 1.25:1 1.20:1 .10 M85/1-059RG-344/UM3

15、922/52-038UG-1355/U Contact 3/ 2.000 (50.80) 2.000 (50.80) - Aluminum alloy 17 1 7.0 - 11.0 1.25:1 1.20:1 .20 M85/1-155RG-320/UM3922/70-001UG-1493/U Cover 3/ 1.515 (38.48) 1.755 (44.58) - Copper alloy 18 1 4.9 - 7.05 1.25:1 1.20:1 .10 M85/1-059M85/1-060RG-344/UM3922/52-038UG-1355/U Contact 3/ 3.500

16、(88.90) 2.188 (55.58) - Aluminum alloy See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-22641/16H 5 TABLE I. Adapters, coaxial to waveguide (class I - series N to waveguide) - Continued. Dash number Figure Freque

17、ncy range (GHz) VSWR over entire frequency range 5/ 6/ VSWR over 50 percent frequencyrange 5/ 6/ RF insertionloss (dB) max 6/ Waveguidehousing 7/ Flange 3/ Dimensions 1/ 2/ Waveguideand flange material A (max) B (max) C (max) 19 1 4.9 - 7.05 1.25:1 1.20:1 .10 M85/1-061RG-343/UM3922/52-037UG-1354/U C

18、ontact 3/ 3.500 (88.90) 2.188 (55.58) - Copper alloy 20 1 2.25 - 5.5 1.30:1 1.20:1 .10 M85/4-001RG-109/UM3922/75-01 UG-509/U Cover 6.000 (152.40)4.000 (101.60) - Copper alloy 21 1 5.0 - 10.0 1.40:1 1.30:1 .10 M85/4-003RG-110/UM3922/75-03 UG-511/U Cover 3.00 (76.2) 2.75 (69.9) - Copper alloy 22 4/ 1

19、7.0 - 11.0 1.10:1 1.10:1 .20 M85/1-155RG-320/UM3922/70-001UG-1493/U 3/Cover 1.40 (35.6) 1.10 (27.9) - Copper alloy 23 2 3.95 - 5.85 1.065:1 1.03:1 .10 M85/1-055RG-49/U M3922/52-013UG-1728/U Contact 3/ 2.00 (50.8) 1.96 (49.8) 1.50 (38.1) Copper alloy 24 2 3.95 - 5.85 1.065:1 1.03:1 .10 M85/1-053RG-95

20、/U M3922/52-014UG-1729/U Contact 3/ 2.00 (50.80) 1.96 (49.8) 1.50 (38.1) Aluminum alloy 25 2 7.05 - 10.00 1.065:1 1.03:1 .10 M85/1-073RG-51/U M3922/52-019UG-1734/U Contact 3/ 1.44 (36.6) 1.07 (27.2) .88 (22.4) Copper alloy 26 2 7.05 - 10.00 1.065:1 1.03:1 .10 M85/1-071RG-68/U M3922/52-020UG-1735/U C

21、ontact 3/ 1.44 (36.6) 1.07 (27.2) .88 (22.4) Aluminum alloy 27 8/ 2 2.60 - 3.95 1.04:1 - .05 M85/4-017M3922/75-06 2.50 (63.5) 1.29 (32.8) 1.53 (38.9) Aluminum alloy See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DT

22、L-22641/16H 6 TABLE I. Adapters, coaxial to waveguide (class I - series N to waveguide) - Continued. Dash number Figure Frequency range (GHz) VSWR over entire frequency range 5/ 6/ VSWR over 50 percent frequencyrange 5/ 6/ RF insertionloss (dB) max 6/ Waveguidehousing 7/ Flange 3/ Dimensions 1/ 2/ W

23、aveguideand flange material A (max) B (max) C (max) 28 8/ 2 2.60 - 5.85 1.25:1 max - .05 M85/4-007M3922/75-02 2.50 (63.5) 1.47 (37.3) 1.60 (40.6) Aluminum alloy 29 8/ 2 5.85 - 8.20 1.04:1 - .05 M85/4-008M3922/75-04 1.50 (38.1) 1.17 (29.7) 1.13 (28.7) Aluminum alloy 30 8/ 2 5.85 - 12.4 1.25:1 max - .

24、05 M85/4-008M3922/75-04 1.50 (38.1) 1.17 (29.7) 1.13 (28.7) Aluminum alloy 1/ Dimensions are in inches. 2/ Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4 mm. 3/ Flange in accordance with MIL-DTL-3922. 4/ Connector shall be female type N (corrosion-resis

25、tant steel). Shock, vibration, and salt spray requirements are not required for this Part or Identifying Number (PIN). 5/ A larger attenuator pad may be used for VSWR test setup (see figure 1 of MIL-DTL-22641) when measuring VSWR values less than 1.25:1. 6/ Swept frequency measuring technique is an

26、acceptable alternate test method for determining VSWR and RF insertion loss value. 7/ Waveguide in accordance with MIL-DTL-85. 8/ Reduced height waveguides and flanges. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-22641/16H 7 Marking: See

27、figures 1 and 2. PIN: M22641/16- (dash number from table I). TABLE II. Cross-reference of AN nomenclature to PIN. AN nomenclature PIN M22641/16- ( )AN nomenclature PIN M22641/16- ( ) UG-397/U UG-398/U UG-399/U UG-400/U UG-446A/U UG-952/U UG-953/U UG-1004/U UG-1005/U UG-1538/U UG-1646/U 01 02 03 04 0

28、5 06 07 20 21 17 18 UG-1653/U UG-1654/U UG-1655/U UG-1656/U UG-1657/U UG-1658/U UG-1659/U UG-1660/U UG-1661/U UG-1679/U 09 10 11 12 13 14 15 16 08 19 Referenced documents. In addition to MIL-DTL-22641, this document references the following: MIL-DTL-85 MIL-DTL-3922 MIL-PRF-39012/1 Marginal notations

29、 are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2010-004) DLA - CC Review activities: Army - AR, GL, MI Navy - AS, OS Air Force - 99 NOTE:

30、 The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-