DLA MIL-DTL-22641 20 D-2010 ADAPTERS COAXIAL TO WAVEGUIDE (SERIES SMA TO WAVEGUIDE - CLASS 5).pdf

1、AMSC N/A FSC 5985 MIL-DTL-22641/20D 9 March 2010 SUPERSEDING MIL-DTL-22641/20C 31 January 2000 DETAIL SPECIFICATION SHEET ADAPTERS, COAXIAL TO WAVEGUIDE (SERIES SMA TO WAVEGUIDE - CLASS 5) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requir

2、ements for acquiring the adapters described herein shall consist of this document and the latest issue of MIL-DTL-22641. FIGURE 1. Adapters, coaxial to waveguide (class 5). REQUIREMENTS: Design, construction, and physical dimensions: See figure 1 and table I. Operating temperature range: -54C to +12

3、5C. Frequency range: See table I. VSWR: See table I. VSWR over 50 percent frequency range shall be VSWR measured over any continuous frequency band of width equal to 50 percent of the entire frequency range, chosen at the discretion of the tester. RF insertion loss: See table I. INCH-POUND Provided

4、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-22641/20D 2 Connector: Connector bodies shall be corrosion-resistant steel. Flange, waveguide: See table I. Housing, waveguide: See table I. Marking: See figure 1. Part or Identifying Number (PIN): M2264

5、1/20- (dash number from table I). TABLE I. Adapters, coaxial to waveguide (class 5 - SMA to waveguide). Dash Frequency VSWR VSWR RF Wave- Flange Dimensions 1/ 2/ 3/ number range (GHz) over entire frequency range (max) 4/ 5/ over 50 percent frequency range (max) 4/ 5 insertionloss dB (max) 5/guide ho

6、using 6/ 7/ Wave- guide and flangematerial Connector A (max) B (max)C (max)01 2.60 - 3.95 1.10:1 1.05:1 0.05 M85/1-041(RG-75/U)M3922/56-002(UG-584/U) AluminumMale 2.235 (56.77) 1.219 (30.96)1.269(32.23)02 2.60 - 3.95 1.10:1 1.05:1 0.05 M85/1-041(RG-75/U)M3922/56-002(UG-584/U) AluminumFemale 2.235 (5

7、6.77) 1.219 (30.96)1.349(34.26)03 8.2 - 12.4 1.10:1 1.05:1 0.15 M85/1-077(RG-67/U)M3922/53-003(UG-135/U) AluminumMale 1.296 (32.92) 0.807 (20.50)0.940(23.88)04 8.2 - 12.4 1.10:1 1.05:1 0.15 M85/1-077(RG-67/U)M3922/53-003(UG-135/U) AluminumFemale 1.296 (32.92) 0.734 (18.64)0.940(23.88)05 12.4 - 18.0

8、1.10:1 1.05:1 0.20 M85/1-090(RG-349/U)M3922/53-006(UG-1665/U)AluminumMale 1.265 (32.13) 0.782 (19.86)0.941(23.90)06 12.4 - 18.0 1.10:1 1.05:1 0.20 M85/1-090(RG-349/U)M3922/53-006(UG-1665/U)AluminumFemale 1.265 (32.13) 0.687 (17.45)0.941(23.90)07 2.60 - 3.95 1.10:1 1.05:1 0.05 M85/1-043(RG-48/U)M3922

9、/56-001(UG-53/U) Copper Male 2.235 (56.77) 1.219 (30.96)1.269(32.23)08 2.60 - 3.95 1.10:1 1.05:1 0.05 M85/1-043(RG-48/U)M3922/56-001(UG-53/U) Copper Female 2.235 (56.77) 1.219 (30.96)1.269(32.23)09 8.2 - 12.4 1.10:1 1.05:1 0.15 M85/1-079(RG-52/U)M3922/53-001(UG-39/U) Copper Male 1.296 (32.92) 0.807

10、(20.50)0.940(23.88)10 8.2 - 12.4 1.10:1 1.05:1 0.15 M85/1-079(RG-52/U)M3922/53-001(UG-39/U) Copper Female 1.296 (32.92) 0.807 (20.50)0.940(23.88)11 12.4 - 18.0 1.10:1 1.05:1 0.20 M85/1-089(RG-91/U)M3922/53-005(UG-419/U) Copper Male 1.256 (31.90) 0.734 (18.64)0.940(23.88)12 12.4 - 18.0 1.25:1 1.05:1

11、0.20 M85/1-089(RG-91/U)M3922/53-005(UG-419/U) Copper Female 1.256 (31.90) 0.782 (19.86)0.940(23.88)13 7.0 - 11.0 1.10:1 1.05:1 0.15 M85/1-158M3922/70-014AluminumMale 1.350 (34.29) 0.970 (24.64)0.950(24.13)14 7.0 - 11.0 1.10:1 1.05:1 0.15 M85/1-158M3922/70-014AluminumFemale 1.350 (34.29) 0.970 (24.64

12、)0.950(24.13)15 12.4 - 18.0 1.10:1 1.05:1 0.20 M85/1-090(RG-349/U)M3922/70-020AluminumMale 1.265 (32.13) 0.910 (23.11)0.840(21.34)16 12.4 - 18.0 1.10:1 1.05:1 0.20 M85/1-090(RG-349/U)M3922/70-020AluminumFemale 1.265 (32.13) 0.910 (23.11)0.840(21.34)17 7.0 - 11.0 1.10:1 1.05:1 0.15 M85/1-155(RG-320/U

13、)M3922/70-013Copper Male 1.350 (34.29) 0.970 (24.64)0.950(24.13)18 7.0 - 11.0 1.10:1 1.05:1 0.15 M85/1-155(RG-320/U)M3922/70-013Copper Female 1.350 (34.29) 0.970 (24.64)0.950(24.13)19 12.4 - 18.0 1.10:1 1.05:1 0.20 M85/1-089(RG-91/U)M3922/70-019Copper Male 1.265 (32.13) 0.910 (23.11)0.840(21.34)20 1

14、2.4 - 18.0 1.10:1 1.05:1 0.20 M85/1-089(RG-91/U)M3922/70-019Copper Female 1.265 (32.13) 0.910 (23.11)0.840(21.34)See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-22641/20D 3 TABLE I. Adapters, coaxial to waveguid

15、e (class 5 - SMA to waveguide) - Continued Dash Frequency VSWR VSWR RF Wave- Flange Dimensions 1/ 2/ 3/ number range (GHz) over entire frequency range (max) 4/ 5/ over 50 percent frequency range (max) 4/ 5 insertionloss dB (max) 5/guide housing 6/ 7/ Wave- guide and flangematerial Connector A (max)

16、B (max)C (max)21 8/ 2.60 - 3.95 1.04:1 - 0.05 M85/4-017M3922/75-06AluminumMale 2.50 (63.5) .913 (23.19)1.53 (38.9)22 8/ 2.60 - 3.95 1.04:1 - 0.05 M85/4-017M3922/75-06AluminumFemale 2.50 (63.5) .913 (23.19)1.53 (38.9)23 8/ 2.60 - 5.85 1.25:1 - 0.05 M85/4-007M3922/75-02AluminumMale 2.50 (63.5) 1.10 (2

17、7.9)1.60 (40.6)24 8/ 2.60 - 5.85 1.25:1 - 0.05 M85/4-007M3922/75-02AluminumFemale 2.50 (63.5) 1.10 (27.9)1.60 (40.6)25 8/ 5.85 - 8.20 1.04:1 - 0.05 M85/4-008M3922/75-04AluminumMale 1.50 (38.1) .88 (22.4)1.13 (28.7)26 8/ 5.85 - 8.20 1.04:1 - 0.05 M85/4-008M3922/75-04AluminumFemale 1.50 (38.1) .88 (22

18、.4)1.13 (28.7)27 8/ 5.85 - 12.4 1.25:1 - 0.05 M85/4-008M3922/75-04AluminumMale 1.50 (38.1) .88 (22.4)1.13 (28.7)28 8/ 5.85 - 12.4 1.25:1 - 0.05 M85/4-008M3922/75-04AluminumFemale 1.50 (38.1) .88 (22.4)1.13 (28.7)1/ Dimensions are in inches. 2/ Metric equivalents are given for general information onl

19、y and are based upon 1.00 inch = 25.4 mm. 3/ Metric equivalents are in parentheses. 4/ A larger attenuator pad may be used for VSWR test setup (see figure 1 of MIL-DTL-22641). 5/ VSWR and RF insertion loss may be measured by swept frequency techniques. 6/ The internal dimensions and material of the

20、waveguide shall be in accordance with MIL-DTL-85. 7/ Flange material and flange mounting hole dimensions shall be in accordance with MIL-DTL-3922. 8/ Reduced height waveguides and flanges. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-22641

21、/20D 4 Referenced documents. In addition to MIL-DTL-22641, this document references the following: MIL-DTL-85 MIL-DTL-3922 MIL-PRF-39012/55 MIL-PRF-39012/57 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custo

22、dians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2010-005) DLA - CC Review activities: Army - MI Navy - AS, MC, OS Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-