DLA MIL-DTL-24558 26 B-2011 TERMINAL BOX CONNECTION SUBMERSIBLE (15-FOOT) 500 VOLTS THREE-PHASE SYMBOL NO 572 1 SIX BRANCH LUGS FOR TWO 3-CONDUCTOR 40 MCM CABLES SIX BUS LUGS FOR T.pdf

1、AMSC N/A FSC 5940 INCH-POUND MIL-DTL-24558/26B 3 October 2011 SUPERSEDING MIL-DTL-24558/26A 28 December 2004 DETAIL SPECIFICATION SHEET TERMINAL BOX, CONNECTION, SUBMERSIBLE (15-FOOT), 500 VOLTS, THREE-PHASE, SYMBOL NO. 572.1, SIX BRANCH LUGS FOR TWO 3-CONDUCTOR 40 MCM CABLES, SIX BUS LUGS FOR TWO 3

2、-CONDUCTOR 75 MCM CABLES This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-24558, “Terminal Boxes, Connection, for Electrical and Elect

3、ronic Systems, General Specification for“. REQUIREMENTS: The terminal box shall be as specified herein and in accordance with table I and figures 1 through 12. 1. Electrical rating. The terminal box shall have an electrical rating of 500 volts root mean square, and 500 volts direct current. Bus term

4、inals are designed for 75 thousand circular mils (MCM) cables. Branch terminals are designed for 40 MCM cables. 2. Dimensions and configuration. For dimensions and configuration see figures 1 through 12. All dimensions in figures 1 through 12 are expressed in decimal inches. Overall terminal box dim

5、ensions are approximate. Exact dimensions are shown in MIL-E-24142/6, “Enclosure, Submersible (15-Foot), Sizes 8 by 10 Through 14 by 26“. 3. Tolerance. All tolerances not specified herein shall be in accordance with MIL-DTL-24558. 4. Standard parts. The standard parts shown in table I shall be used

6、in the construction of the connection box specified herein. The numbers in circles shown on figures 1, 2, 4, 5, 6, 7, 8, 9, 10, 11, and 12 are the same as those shown in the “Item“ column of table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI

7、L-DTL-24558/26B 2 5. Enclosure. The enclosure shall be a 15-foot submersible type. 6. Finish. The interior of the enclosure may be painted or left unpainted at the contractors option. 7. Weight. The weight of the connection box shall not exceed 29.9 pounds. QUALITY ASSURANCE: First article inspectio

8、n and quality conformance inspection shall be as specified in MIL-DTL-24558. NOTES: 1. Drawing. The terminal box specified by this specification sheet was formerly covered on NAVSHIPS drawing no. 9000-S6202-74175. 2. Part or identifying number (PIN). The PIN to be used for terminal boxes acquired to

9、 this specification is created as follows: M 24558/26 - 572.1 Symbol number Specification sheet number General specification number Denotes military specification Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 3 TABLE I. Parts list

10、. Item Description QtyPart number or specification Remarks 1 Enclosure assembly, brass with type A cover 1 MIL-E-24142/6 M24142/6-004 2 Identification plate 1 MIL-DTL-24558 Figure 6 3 Information plate 1 MIL-DTL-24558 Figure 6 4 Terminal board base 1 Figure 4 MIL-I-24768/1 type GME 5 Mounting bracke

11、t 2 MIL-DTL-24558 Figure 2 6 Terminal bus cover 1 Figure 5 MIL-I-24768/1 type GME 7 Terminal bus assembly - phase “A“ and “C“ 2 Figure 6 Brass 8 Terminal bus assembly - phase “B“ 1 Figure 7 Brass 9 Terminal bus body 6 9000-S6202-73055, pc 2 Brass 10 Terminal bus pressure screw assembly 6 9000-S6202-

12、73055, pc 22 Brass 11 Branch terminal body 6 9000-S6202-73246, pc 3 Brass 12 Branch terminal pressure screw assembly 6 9000-S6202-73246, pc 23 Brass 13 Terminal board spacer 2 Figure 8 MIL-I-24768/1 type GME 14 Barrier, 1-hole 4 Figure 9 MIL-I-24768/1 type GME 15 Insert 4 Figure 10 Steel 16 Barrier,

13、 2-hole 2 Figure 11 MIL-I-24768/1 type GME 17 Spacer 6 Figure 12 Brass 18 RDH machine screw .138-32 X 0.188 4 Commercial Brass 19 FLH machine screw .138-32 X 0.500 8 Commercial Steel 20 RDH machine screw .190-24 X 0.562 9 Commercial Brass 21 Washer, #10 internal tooth 9 Commercial Steel 22 FLH machi

14、ne screw .190-24 X 1.250 4 Commercial Steel 23 RDH machine screw1/4-20 X 0.750 4 Commercial Steel 24 Washer, 1/4 internal tooth 4 Commercial Steel Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 4 FIGURE 1. Connection box assembly.P

15、rovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 5 FIGURE 2. Location of terminal board mounting brackets. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 6 FIGURE 3.

16、 Mounting dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 7 FIGURE 4. Terminal board base. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 8 FIGURE 5. T

17、erminal bus cover. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 9 FIGURE 6. Terminal bus assembly - phase “A“ and “C“. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-2455

18、8/26B 10 FIGURE 7. Terminal bus assembly - phase “B“. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 11 FIGURE 8. Terminal board spacer. FIGURE 9. Barrier, 1-hole. Provided by IHSNot for ResaleNo reproduction or networking permitte

19、d without license from IHS-,-,-MIL-DTL-24558/26B 12 FIGURE 10. Insert. FIGURE 11. Barrier, 2-hole. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/26B 13 FIGURE 12. Spacer. Provided by IHSNot for ResaleNo reproduction or networking perm

20、itted without license from IHS-,-,-MIL-DTL-24558/26B 14 CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Navy - SH DLA - GS DLA - GS4 (Project 5940-20

21、11-053) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-