DLA MIL-DTL-27072 29 C-2012 CABLE SPECIAL PURPOSE ELECTRICAL MULTICONDUCTOR (12 CONDUCTORS) AND SINGLE SHIELDED M27072 29MACA.pdf

1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-27072/29C 12 March 2012 SUPERSEDING MIL-DTL-27072/29B8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR, (12 CONDUCTORS) AND SINGLE SHIELDED, M27072/29MACA* This specification is approved for use by all Departments and

2、Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: NOTE: The complete Part or Identifying Number (PIN) requires a color code designator (see table I). FIGURE 1. Cable configurat

3、ion. WHT W/BLK & GRN WHT W/ORN WHT W/GRN WHT W/BLU WHT W/BLK WHT W/BLK & ORN WHT W/RED WHT W/BRN WHT W/ BLK & RED WHT W/BLK & BRN WHT W/BLK & BLK WHT W/VIO SHEATH POLYVINYL CHLORIDE SHIELD TINNED COPPER Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

4、-MIL-DTL-27072/29C 2 Design and construction: See figure 1 Number of conductors: 12 Temperature rating: 105 C Components: Basic wire: M16878/17BFB* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl chloride Colors: White with black tracer White with brown tracer White with red tra

5、cer White with orange tracer White with green tracer White with blue tracer White with violet tracer White with two black tracers White with black and brown tracers White with black and red tracers White with black and orange tracers White with black and green tracers Jacket over Insulation: Polyami

6、de Color: Natural Filler: Not applicable Cabling: Number of conductors: Twelve Maximum pitch or lay: 3.0 inches Binder tape material: Not applicable Shield: Material: Tinned copper Gauge: 36 AWG Braid angle: 20 to 40 degrees Jacket undershield: Not applicable Sheath: Material: Polyvinyl chloride Wal

7、l thickness: .030 inch nominal Tensile strength: In accordance with MIL-DTL-27072 Ultimate elongation: In accordance with MIL-DTL-27072 Accelerated aging: In accordance with MIL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accordance MIL-DTL-27072 Dielect

8、ric withstanding voltage: 2,000 V rms Conductor resistance: In accordance with basic wire specification Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/29C 3 TABLE I. Construction data. PIN 27072/29 Basic wire except color M16878/17BFB*

9、1/,2/(reference) Finished cable diameter (in.) 10% Wire size (AWG) Number of strands Strand size Nominal diameter (inch) MACA* 22 7 30 .056 .310 1/ Asterisks (*) shall be replaced by the appropriate color designator. 2/ Dimensions are in inches. Metric equivalents are given for information only. Cha

10、nges from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issues due to the extensiveness of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA -

11、 CC Navy - SH Air Force - 85 (Project 6145-2012-021) DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-