1、 AMSC N/A FSC 6145 . INCH-POUND MIL-DTL-27072/79C 12 March 2012 SUPERSEDING MIL-DTL-27072/79B8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR (7 CONDUCTORS), M27072/79KAAA* This specification is approved for use by all Departments and Agencies of the Depa
2、rtment of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: TAPESHEATH POLYVINYL CHLORIDE WHITE/BROWNWHITE/BLUEWHITE/YELLOWWHITE/REDWHITE/BLACKWHITE/ORANGEWHITE/GREENFILLERNOTE: The complete Part or Identif
3、ying Number (PIN) requires a color code designator (see table I). FIGURE 1. Cable configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/79C 2 Design and construction: See figure 1 Number of conductor: 7 Temperature rating: 105
4、C Components: Basic wire: M16878/17BGB* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl chloride Colors: White with black tracer White with blue tracer White with brown tracer White with green tracer White with orange tracer White with red tracer White with yellow tracer Jacket
5、over Insulation: Polyamide Color: Natural Filler: Material: Polyethylene Lay: 3.0 inches maximum Cabling: Not applicable Binder tape material: In accordance with MIL-DTL-27072 Shield: Not applicable Jacket undershield: Not applicable Sheath: Material: Polyvinyl chloride Wall thickness: .025 inch nom
6、inal Tensile strength: In accordance with MIL-DTL-27072 Ultimate elongation: In accordance with MIL-DTL-27072 Accelerated aging: In accordance with MIL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accordance with MIL-DTL-27072 Dielectric withstanding volt
7、age: 2,000 V rms Conductor resistance: In accordance with base wire specification TABLE I. Construction data. PIN 27072/79 Basic wire except color M16878/17BGB*1/,2/(reference) Finished cable diameter inch(mm) 10% Wire size (AWG) Number of strands Strand size Nominal diameter inch(mm) KAAA* 20 7 28
8、.064(1.63) .227(5.76) 1/ Asterisks (*) shall be replaced by the appropriate color designator. 2/ Dimensions are in inches. Metric equivalents are given for information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/79C 3 Changes
9、from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issues due to the extensiveness of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC N
10、avy - SH Air Force - 85 (Project 6145-2012-016) DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1