DLA MIL-DTL-28840 28 G-2013 CONNECTORS ELECTRICAL CIRCULAR THREADED HIGH DENSITY HIGH SHOCK SHIPBOARD CRIMP CONTACTS PLUG ASSEMBLY 90o CLASSES DJ DJS PJ TJ TJS ZJ AND ZJS.pdf

1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH DENSITY, HIGH SHOCK, SHIPBOARD, CRIMP CONTACTS, PLUG ASSEMBLY, 90, CLASSES DJ, DJS, PJ, TJ, TJS, ZJ, AND ZJS This specification is approved for use by all Departments and Agencies of the Department of Defen

2、se. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-28840. FIGURE 1. Dimensions and configuration. MIL-DTL-28840/28G 21 November 2013 SUPERSEDING MIL-DTL-28840/28F 11 January 2010 INCH-POUND Provided by IHSNot for ResaleNo reproductio

3、n or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 2 Designator (see note 3) Assembly Part or Identifying Number (PIN) (see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) A Cable entry B thread class 2B E ref max min A (11) M28840/28*A*AA* M2884

4、0/16*A* M28840/801*A .312 (7.92) .188 (4.77) .750-.1P -.2L-D.S. .938 (23.82) A (11) M28840/28*A*AB* M28840/16*A* M28840/801*B A (11) M28840/28*A*BA* M28840/16*A* M28840/824*A .438 (11.13) .281 (7.14) .750-.1P -.2L-D.S. 1.125 (28.57) A (11) M28840/28*A*BB* M28840/16*A* M28840/824*B A (11) M28840/28*A

5、*CA* M28840/16*A* M28840/825*A .562 (14.27) .344 (8.74) .750-.1P -.2L-D.S. 1.312 (33.32) A (11) M28840/28*A*CB* M28840/16*A* M28840/825*B B (13) M28840/28*B*AA* M28840/16*B* M28840/802*A .312 (7.92) .188 (4.77) .875-.1P -.2L-D.S. .938 (23.82) B (13) M28840/28*B*AB* M28840/16*B* M28840/802*B B (13) M

6、28840/28*B*BA* M28840/16*B* M28840/803*A .438 (11.13) .281 (7.14) .875-.1P -.2L-D.S. 1.125 (28.57) B (13) M28840/28*B*BB* M28840/16*B* M28840/803*B B (13) M28840/28*B*CA* M28840/16*B* M28840/826*A .562 (14.27) .344 (8.74) .875-.1P -.2L-D.S. 1.312 (33.32) B (13) M28840/28*B*CB* M28840/16*B* M28840/82

7、6*B B (13) M28840/28*B*DA* M28840/16*B* M28840/827*A .625 (15.87) .375 (9.52) .875-.1P -.2L-D.S. 1.312 (33.32) B (13) M28840/28*B*DB* M28840/16*B* M28840/827*B C (15) M28840/28*C*AA* M28840/16*C* M28840/805*A .438 (11.13) .281 (7.14) 1.062-.1P -.2L-D.S. 1.125 (28.57) C (15) M28840/28*C*AB* M28840/16

8、*C* M28840/805*B C (15) M28840/28*C*BA* M28840/16*C* M28840/806*A .562 (14.27) .344 (8.74) 1.062-.1P -.2L-D.S. 1.312 (33.32) C (15) M28840/28*C*BB* M28840/16*C* M28840/806*B C (15) M28840/28*C*CA* M28840/16*C* M28840/828*A .625 (15.87) .375 (9.52) 1.062-.1P -.2L-D.S. 1.312 (33.32) C (15) M28840/28*C

9、*CB* M28840/16*C* M28840/828*B C (15) M28840/28*C*DA* M28840/16*C* M28840/807*A .750 (19.05) .438 (11.12) 1.062-.1P -.2L-D.S. 1.593 (40.46) C (15) M28840/28*C*DB* M28840/16*C* M28840/807*B C (15) M28840/28*C*EA* M28840/16*C* M28840/804*A .312 (7.92) .188 (4.77) 1.062-.1P -.2L-D.S. .938 (23.82) C (15

10、) M28840/28*C*EB* M28840/16*C* M28840/804*B FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 3 Designator (see note 3) Assembly (PIN) (see note 6) Connector plug (PIN) (see note 6) Ba

11、ckshell assembly (PIN) (see note 6) H max style A N max style B L max Q max A (11) M28840/28*A*AA* M28840/16*A* M28840/801*A 5.332 (135.43) - 4.139 (105.13) 3.306 (83.97) A (11) M28840/28*A*AB* M28840/16*A* M28840/801*B - 2.962 (75.23) A (11) M28840/28*A*BA* M28840/16*A* M28840/824*A 5.332 (135.43)

12、- 3.306 (83.97) A (11) M28840/28*A*BB* M28840/16*A* M28840/824*B - 2.962 (75.23) A (11) M28840/28*A*CA* M28840/16*A* M28840/825*A 5.457 (138.61) - 4.389 (111.48) 3.431 (87.15) A (11) M28840/28*A*CB* M28840/16*A* M28840/825*B - 3.087 (78.41) B (13) M28840/28*B*AA* M28840/16*B* M28840/802*A 5.332 (135

13、.43) - 4.139 (105.13) 3.306 (83.97) B (13) M28840/28*B*AB* M28840/16*B* M28840/802*B - 2.962 (75.23) B (13) M28840/28*B*BA* M28840/16*B* M28840/803*A 5.332 (135.43) - 4.139 (105.13) 3.306 (83.97) B (13) M28840/28*B*BB* M28840/16*B* M28840/803*B - 2.962 (75.23) B (13) M28840/28*B*CA* M28840/16*B* M28

14、840/826*A 5.457 (138.61) - 4.389 (111.48) 3.431 (87.15) B (13) M28840/28*B*CB* M28840/16*B* M28840/826*B - 3.087 (78.41) B (13) M28840/28*B*DA* M28840/16*B* M28840/827*A 5.682 (144.32) - 4.639 (117.83) 3.556 (90.32) B (13) M28840/28*B*DB* M28840/16*B* M28840/827*B - 3.312 (84.12) C (15) M28840/28*C*

15、AA* M28840/16*C* M28840/805*A 5.457 (138.61) - 4.389 (111.48) 3.431 (87.15) C (15) M28840/28*C*AB* M28840/16*C* M28840/805*B - 3.087 (78.41) C (15) M28840/28*C*BA* M28840/16*C* M28840/806*A 5.457 (138.61) - 3.431 (87.15) C (15) M28840/28*C*BB* M28840/16*C* M28840/806*B - 3.087 (78.41) C (15) M28840/

16、28*C*CA* M28840/16*C* M28840/828*A 5.682 (144.32) - 4.639 (117.83) 3.556 (90.32) C (15) M28840/28*C*CB* M28840/16*C* M28840/828*B - 3.312 (84.12) C (15) M28840/28*C*DA* M28840/16*C* M28840/807*A 5.713 (145.11) - 3.556 (90.32) C (15) M28840/28*C*DB* M28840/16*C* M28840/807*B - 3.343 (84.91) C (15) M2

17、8840/28*C*EA* M28840/16*C* M28840/804*A 5.457 (138.61) - 4.389 (111.48) 3.431 (87.15) C (15) M28840/28*C*EB* M28840/16*C* M28840/804*B - 3.087 (78.41) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M

18、IL-DTL-28840/28G 4 Designator (see note 3) Assembly (PIN) (see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) A Cable entry B thread class 2B E ref max min D (17) M28840/28*D*AA* M28840/16*D* M28840/808*A .625 (15.87) .375 (9.52) 1.125-.1P -.2L-D.S. 1.312 (33.32) D (

19、17) M28840/28*D*AB* M28840/16*D* M28840/808*B D (17) M28840/28*D*BA* M28840/16*D* M28840/809*A .750 (19.05) .438 (11.12) 1.125-.1P -.2L-D.S. 1.593 (40.46) D (17) M28840/28*D*BB* M28840/16*D* M28840/809*B D (17) M28840/28*D*CA* M28840/16*D* M28840/810*A .938 (23.82) .625 (15.87) 1.125-.1P -.2L-D.S. 1

20、.750 (44.45) D (17) M28840/28*D*CB* M28840/16*D* M28840/810*B E (19) M28840/28*E*AA* M28840/16*E* M28840/811*A .625 (15.87) .375 (9.52) 1.312-.1P -.2L-D.S. 1.312 (33.32) E (19) M28840/28*E*AB* M28840/16*E* M28840/811*B E (19) M28840/28*E*BA* M28840/16*E* M28840/812*A .938 (23.82) .625 (15.87) 1.312-

21、.1P -.2L-D.S. 1.750 (44.45) E (19) M28840/28*E*BB* M28840/16*E* M28840/812*B F (23) M28840/28*F*AA* M28840/16*F* M28840/813*A .750 (19.05) .438 (11.12) 1.500-.1P -.2L-D.S. 1.593 (40.46) F (23) M28840/28*F*AB* M28840/16*F* M28840/813*B F (23) M28840/28*F*BA* M28840/16*F* M28840/814*A .938 (23.82) .62

22、5 (15.87) 1.500-.1P -.2L-D.S. 1.750 (44.45) F (23) M28840/28*F*BB* M28840/16*F* M28840/814*B F (23) M28840/28*F*CA* M28840/16*F* M28840/815*A 1.188 (30.18) .812 (20.62) 1.500-.1P -.2L-D.S. 2.093 (53.16) F (23) M28840/28*F*CB* M28840/16*F* M28840/815*B FIGURE 1. Dimensions and configuration Continued

23、. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 5 Designator (see note 3) Assembly (PIN) (see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) H max style A N max style B L max Q max D (17) M28840/28

24、*D*AA* M28840/16*D* M28840/808*A 5.682 (144.32) - 4.639 (117.83) 3.556 (90.32) D (17) M28840/28*D*AB* M28840/16*D* M28840/808*B - 3.312 (84.12) D (17) M28840/28*D*BA* M28840/16*D* M28840/809*A 5.713 (145.11) - 3.556 (90.32) D (17) M28840/28*D*BB* M28840/16*D* M28840/809*B - 3.343 (84.91) D (17) M288

25、40/28*D*CA* M28840/16*D* M28840/810*A 5.807 (147.50) - 3.556 (90.32) D (17) M28840/28*D*CB* M28840/16*D* M28840/810*B - 3.437 (87.30) E (19) M28840/28*E*AA* M28840/16*E* M28840/811*A 5.682 (144.32) - 3.556 (90.32) E (19) M28840/28*E*AB* M28840/16*E* M28840/811*B - 3.312 (84.12) E (19) M28840/28*E*BA

26、* M28840/16*E* M28840/812*A 5.832 (148.13) - 4.889 (124.18) 3.681 (93.50) E(19) M28840/28*E*BB* M28840/16*E* M28840/812*B - 3.462 (87.93) F (23) M28840/28*F*AA* M28840/16*F* M28840/813*A 5.738 (145.75) - 3.681 (93.50) F (23) M28840/28*F*AB* M28840/16*F* M28840/813*B - 3.368 (85.55) F (23) M28840/28*

27、F*BA* M28840/16*F* M28840/814*A 5.832 (148.13) - 3.681 (93.50) F (23) M28840/28*F*BB* M28840/16*F* M28840/814*B - 3.462 (87.93) F (23) M28840/28*F*CA* M28840/16*F* M28840/815*A 6.019 (152.88) - 3.681 (93.50) F (23) M28840/28*F*CB* M28840/16*F* M28840/815*B - 3.649 (92.68) FIGURE 1. Dimensions and co

28、nfiguration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 6 Designator (see note 3) Assembly number (PIN) (see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) A Cable entry B thread class

29、 2B E ref max min G (25) M28840/28*G*AA* M28840/16*G* M28840/816*A .938 (23.82) .625 (15.87) 1.625-.1P -.2L-D.S. 1.750 (44.45) G (25) M28840/28*G*AB* M28840/16*G* M28840/816*B G (25) M28840/28*G*BA* M28840/16*G* M28840/817*A 1.188 (30.18) .812 (20.62) 1.625-.1P -.2L-D.S. 2.093 (53.16) G (25) M28840/

30、28*G*BB* M28840/16*G* M28840/817*B G (25) M28840/28*G*CA* M28840/16*G* M28840/818*A 1.250 (31.75) .875 (22.22) 1.625-.1P -.2L-D.S. 2.093 (53.16) G (25) M28840/28*G*CB* M28840/16*G* M28840/818*B G (25) M28840/28*G*DA* M28840/16*G* M28840/819*A 1.380 (35.05) 1.000 (25.40) 1.625-.1P -.2L-D.S. 2.343 (59

31、.51) G (25) M28840/28*G*DB* M28840/16*G* M28840/819*B H (29) M28840/28*H*AA* M28840/16*H* M28840/820*A 1.188 (30.18) .812 (20.62) 1.812-.1P -.2L-D.S. 2.093 (53.16) H (29) M28840/28*H*AB* M28840/16*H* M28840/820*B H (29) M28840/28*H*BA* M28840/16*H* M28840/821*A 1.380 (35.05) 1.000 (25.40) 1.812-.1P

32、-.2L-D.S. 2.343 (59.51) H (29) M28840/28*H*BB* M28840/16*H* M28840/821*B J (33) M28840/28*J*AA* M28840/16*J* M28840/822*A 1.380 (35.05) 1.000 (25.40) 2.000-.1P -.2L-D.S. 2.343 (59.51) J (33) M28840/28*J*AB* M28840/16*J* M28840/822*B J (33) M28840/28*J*BA* M28840/16*J* M28840/823*A 1.625 (41.27) 1.25

33、0 (31.75) 2.000-.1P -.2L-D.S. 2.750 (69.85) J (33) M28840/28*J*BB* M28840/16*J* M28840/823*B FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 7 Designator (see note 3) Assembly (PIN)

34、(see note 6) Connector plug (PIN) (see note 6) Backshell assembly (PIN) (see note 6) H max style A N max style B L max Q max G (25) M28840/28*G*AA* M28840/16*G* M28840/816*A 5.832 (148.13) - 4.889 (124.18) 3.681 (93.50) G (25) M28840/28*G*AB* M28840/16*G* M28840/816*B - 3.462 (87.93) G (25) M28840/2

35、8*G*BA* M28840/16*G* M28840/817*A 6.019 (152.88) - 3.681 (93.50) G (25) M28840/28*G*BB* M28840/16*G* M28840/817*B - 3.649 (92.68) G (25) M28840/28*G*CA* M28840/16*G* M28840/818*A 6.144 (156.06) - 5.139 (130.53) 3.806 (96.67) G (25) M28840/28*G*CB* M28840/16*G* M28840/818*B - 3.774 (95.86) G (25) M28

36、840/28*G*DA* M28840/16*G* M28840/819*A 6.176 (156.87) - 3.806 (96.67) G (25) M28840/28*G*DB* M28840/16*G* M28840/819*B - 3.806 (96.67) H (29) M28840/28*H*AA* M28840/16*H* M28840/820*A 6.144 (156.06) - 3.806 (96.67) H (29) M28840/28*H*AB* M28840/16*H* M28840/820*B - 3.774 (95.86) H (29) M28840/28*H*B

37、A* M28840/16*H* M28840/821*A 6.176 (156.87) - 3.806 (96.67) H (29) M28840/28*H*BB* M28840/16*H* M28840/821*B - 3.806 (96.67) J (33) M28840/28*J*AA* M28840/16*J* M28840/822*A 6.426 (163.22) - 5.639 (143.23) 4.056 (103.02) J (33) M28840/28*J*AB* M28840/16*J* M28840/822*B - 4.056 (103.02) J (33) M28840

38、/28*J*BA* M28840/16*J* M28840/823*A 6.701 (170.21) - 4.056 (103.02) J (33) M28840/28*J*BB* M28840/16*J* M28840/823*B - 4.331 (110.01) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Shell sizes are provided within parentheses for information and are not a

39、 part of the designator. 4. Dimensions apply after plating. 5. Normal mating key position shown. Alternate key positions in accordance with MIL-DTL-28840. 6. Assembly shall be made of a connector and backshell of the same material. FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot

40、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 8 REQUIREMENTS: Dimensions and configuration: See figure 1. Classes: DJ, DJS, PJ, TJ, TJS, ZJ and ZJS. Insert arrangements: See the figure of MIL-STD-1698 corresponding to the desired shell size. Contac

41、ts: Pin or socket, crimp type, styles P, S, D, E, F or G, in accordance with MIL-DTL-28840. Shell polarization: 1 thru 6, key position. Marking: Part or Identifying Number (PIN) on shell. Mating counterpart: Mating connectors in accordance with MIL-DTL-28840/10, /11, /12, /14, /20 and /21. Installat

42、ion and removal tool: In accordance MIL-I-81969/33 and /34. PINs shown indicate aluminum alloy hardware. If corrosion resistant steel parts are required, the connector and accessory part numbers must be changed to designate corrosion resistant hardware. PIN example: M28840/28 C G 1 A A P 1 Specifica

43、tion sheet number Key position 1, 2, 3, 4, 5, 6 position Contact designator Backshell style Backshell designator Insert arrangement Shell size RESTRICTIONS: Classes DJ and DJS are inactive for NAVSEA new design, unless approved by NAVSEA. Classes Code letter DJ C DJS E PJ G TJ M TJS V ZJ U ZJS X Pro

44、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/28G 9 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience

45、 only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Refere

46、nced documents. In addition to MIL-DTL-28840, this document references the following: MIL-DTL-28840/8 MIL-DTL-28840/10 MIL-DTL-28840/11 MIL-DTL-28840/12 MIL-DTL-28840/14 MIL-DTL-28840/16 MIL-DTL-28840/20 MIL-DTL-28840/21 MIL-I-81969/33 MIL-I-81969/34 MIL-STD-1698 CONCLUDING MATERIAL Custodians: Prep

47、aring activity: Army - AT DLA - CC Navy - EC Air Force - 85 DLA - CC (Project 5935-2013-126) Review activities: Army AV, MI Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST