DLA MIL-DTL-3607 3 C-2013 CONNECTOR RECEPTACLE ELECTRICAL SERIES PULSE TYPE UG-37 U.pdf

1、AMSC N/A FSC 5935 MIL-DTL-3607/3C 24 July 2013 SUPERSEDING MIL-C-3607/3B 12 December 1963 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, SERIES PULSE, TYPE UG-37/U This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for

2、 acquiring the product described herein shall consist of this specification sheet and MIL-DTL-3607. NOTES 1. Dimensions are in inches. 2. Contact, REA10890, and screw shall have a silver plating of 0.0002 (0.01) inch thick. All other metal parts shall be nickel-plated. 3. This item is a #5-40 UNC-2A

3、 x 3/8 inch long, brass, roundhead machine screw. 4. The concentricity of the contact, REA10890, with respect to the body, REB10892, shall be not more than 0.016 (0.41mm) total dial indicator reading. The concentricity of the insulator, REB10893, shall be not more than 0.020 (0.51mm) total indicator

4、 reading. 5. Metric equivalents are given for information only. 6. Unless otherwise specified, tolerances are .005 on decimals. FIGURE 1. Type UG-37A/U electrical receptacle connector. Inches mm 2.75 69.85 5.75 146.06 INCH - POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted w

5、ithout license from IHS-,-,-MIL-DTL-3607/3C 2 DIMENSIONS LTR INCHES MILLIMETERS MIN NOM MAX MIN NOM MAX A 1.508 1.513 38.30 38.40 B 1.281 1.312 1.344 32.54 33.32 34.14 C .984 1.000 1.031 24.99 25.4 26.19 D .172 .188 .203 4.37 4.76 5.16 E .589 .594 .599 14.96 15.09 15.21 FIGURE 2. Dimensional require

6、ments for group B inspection. REQUIREMENTS The electrical plug connector shall be of the design, construction, and physical dimensions specified on figure 1. QUALITY ASSURANCE PROVISIONS Sampling and inspection shall be in accordance with MIL-DTL-3607, and as specified herein. Group B inspection sha

7、ll be in accordance with MIL-DTL-3607. Mating dimensions shall be as specified on figure 2. Leakage: The leakage test is not applicable. Dielectric withstanding voltage: The test voltage for the dielectric-withstanding-voltage-test shall be 18,000 volts, root mean square. Part or Identifying Number

8、(PIN): M3607/3-01 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-3607. . Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

9、nse from IHS-,-,-MIL-DTL-3607/3C 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy EC Air Force - 85 DLA - CC Review activities: (Project 5935-2013-079) Air Force 99 Army - MI NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-