DLA MIL-DTL-3928 10 F-2013 SWITCHES RADIO-FREQUENCY TRANSMISSION LINE (COAXIAL) (ELECTRICALLY OPERATED) CLASS 1.pdf

1、AMSC N/A FSC 5985 MIL-DTL-3928/10F 28 January 2013 SUPERSEDING MIL-DTL-3928/10E 15 August 2001 DETAIL SPECIFICATION SHEET SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE (COAXIAL) (ELECTRICALLY OPERATED) CLASS 1 This specification is approved for use by all Departments and Agencies of the Department of

2、Defense. Requirements for acquiring the switch described herein shall consist of this specification and MIL-DTL-3928. Dimensions Letter Inches Millimeters Letter Inches Millimeters Max Min Max Min Max Min Max Min A 2.03 1.97 51.6 50.0 J 1.510 1.490 38.35 37.85 B 1.135 1.115 28.83 28.32 K .792 .772 2

3、0.12 19.61 C .112-40 UNC-2B dia 2.84-40 UNC-2B dia L .604 .584 15.34 14.83 D .697 .677 17.70 17.20 M .681 .661 17.30 16.79 E .104 .084 2.64 2.13 N 1.03 .97 26.2 24.6 F .885 .865 22.48 21.97 P .775 .755 19.68 19.18 G .135 .115 3.43 2.92 Q .510 .490 12.95 12.45 H .510 .490 12.95 12.45 NOTES: 1. Dimens

4、ions are in inches. 2. Metric equivalents (in millimeters) are given for general information only (1.00 inch = 25.4 mm). 3. Corners of case may be round or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGURE 1

5、. PINs M3928/10-01, M3928/10-02, and M3928/10-03. INCH-POUND Position 1. (De-energized or failsafe position), C connects to NC connector. Position 2. (Energized position), C connects to NO connector. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI

6、L-DTL-3928/10F 2 Position 1. (De-energized or failsafe position), C connects to NC connector. Position 2. (Energized position), C connects to NO connector. Dimensions Letter Inches Millimeters Letter Inches Millimeters Max Min Max Min Max Min Max Min A .32 - 8.1 - J .213 dia .193 dia 5.41 dia 4.90 d

7、ia B .38 .32 9.7 8.1 K .880 .860 22.35 21.84 C .73 .67 18.5 17.0 L .895 .875 22.73 22.23 D 2.2 - 56 - M 1.780 1.760 45.21 44.70 E .210 .190 5.33 4.83 N 2.71 - 68.8 - F .63 .57 16.0 14.5 P .27 .21 6.9 5.3 G .452 .432 11.48 10.97 Q .56 .50 14.2 12.7 H .895 .875 22.73 22.23 R 1.09 - 27.7 - NOTES: 1. Di

8、mensions are in inches. 2. Metric equivalents (in millimeters) are given for general information only (1.00 inch = 25.4 mm). 3. Corners of case may be round or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGU

9、RE 2. PINs M3928/10-04 and M3928/10-09. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 3 Position 1. (De-energized or failsafe position), C connects to NC connector. Position 2. (Energized position), C connects to NO connector. Dime

10、nsions Letter Inches Millimeters Letter Inches Millimeters Max Min Max Min Max Min Max Min A .32 - 8.1 - J .213 dia .193 dia 5.41 dia 4.90 dia B .38 .32 9.7 8.1 K .880 .860 22.35 21.84 C .73 .67 18.5 17.0 L .895 .875 22.73 22.23 D 2.2 - 56 - M 1.780 1.760 45.21 44.70 E .210 .190 5.33 4.83 N 2.71 - 6

11、8.8 - F .63 .57 16.0 14.5 P .27 .21 6.9 5.3 G .452 .432 11.48 10.97 Q .555 .535 14.10 13.59 H .895 .875 22.73 22.23 R 1.09 - 27.7 - NOTES: 1. Dimensions are in inches. 2. Metric equivalents (in millimeters) are given for general information only (1.00 inch = 25.4 mm). 3. Corners of case may be round

12、 or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGURE 3. PIN M3928/10-05. Actuator and ind. ckt terminals Solenoid common A Solenoid (position 2) +28 V dc B Ind. ckt common C Ind. ckt (position 1) D Ind. ckt

13、 (position 2) E Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 4 FIGURE 4. PIN M3928/10-06. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 5 Dimensions Letter Inche

14、s Millimeters Letter Inches Millimeters Max Min Max Min Max Min Max Min A .59 .53 15.0 13.5 M 2.72 2.66 69.1 67.6 B 3.47 3.41 88.1 86.6 N 1.545 1.535 39.2 39.0 C 2.945 2.935 74.80 74.55 P .39 .33 9.9 8.4 D 2.53 2.47 64.3 62.7 Q 1.15 1.09 29.2 27.7 E 2.395 2.385 60.83 60.58 R .59 .53 15.0 13.5 F .18

15、.12 4.6 3.0 S .50 .44 12.7 11.2 G .30 .24 7.6 6.1 T .873 .867 22.17 22.02 H 1.28 1.22 32.5 31.0 U .873 .867 22.17 22.02 J 3.66 - 93.0 - V .10 .04 2.5 1.0 K 2.63 - 66.8 - W .185 .175 4.70 4.44 L .69 .63 17.5 16.0 NOTES: 1. Dimensions are in inches. 2. Metric equivalents (in millimeters) are given for

16、 general information only (1.00 inch = 25.4 mm). 3. Corners of case may be round or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGURE 4. PIN M3928/10-06 - Continued. Provided by IHSNot for ResaleNo reproduct

17、ion or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 6 FIGURE 5. PIN M3928/10-07. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 7 Dimensions Letter Inches Millimeters Letter Inches Millimeters Max Min Max Min M

18、ax Min Max Min A 2.00 - 50.8 - M .40 .33 10.2 8.4 B 1.10 .90 27.9 22.9 N .37 .31 9.4 7.9 C .107 .097 2.72 2.46 P .185 dia .175 dia 4.70 dia 4.45 dia D 1.10 .90 27.9 22.9 Q 1.567 1.557 39.80 39.55 E 2.00 - 50.8 - R 2.255 2.245 57.28 57.02 F 1.03 .97 26.2 24.6 S 1.010 ref .990 ref 25.65 ref 25.15 ref

19、G 3.28 3.22 83.3 81.8 T .164-32 UNC-2B x .37 DP (No. 8) 4.17-32 UNC-2B x 9.40 DP (No. 8) H .69 .63 17.5 16.0 J 4.40 - 111.8 - U .817 .807 20.75 20.50 K 2.78 2.72 70.6 69.1 V 1.03 .97 26.2 24.6 L 2.40 2.34 61.0 59.4 W 1.630 1.620 41.40 41.15 NOTES: 1. Dimensions are in inches. 2. Metric equivalents (

20、in millimeters) are given for general information only (1.00 inch = 25.4 mm). 3. Corners of case may be round or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGURE 5. PIN M3928/10-07 - Continued. Provided by

21、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 8 FIGURE 6. PINs M3928/10-08, M3928/10-10, and M3928/10-11. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 9 Dimensions Letter In

22、ches Millimeters Letter Inches Millimeters Max Min Max Min Max Min Max Min A 3.28 3.22 83.3 81.8 L .753 .747 19.13 18.97 B 1.78 - 45.2 - M 2.60 - 66.0 - C .198 dia .192 dia 5.03 dia 4.88 dia N .65 - 16.5 - D .35 .29 8.9 7.4 P .730 .710 18.54 18.03 E 2.610 2.590 66.29 65.79 Q .885 .865 22.48 21.97 F

23、.49 - 12.4 - R .138-32 UNC-2B x .25 DP (No. 6) 3.50-32 UNC-2B x 6.4 DP (No. 6) G 1.510 1.490 38.35 37.85 H .63 .57 16.0 14.5 S .452 .432 11.48 10.97 J .33 .27 8.4 6.9 T .895 .875 22.73 22.23 K .28 .22 7.1 5.6 NOTES: 1. Dimensions are in inches. 2. Metric equivalents (in millimeters) are given for ge

24、neral information only (1.00 inch = 25.4 mm). 3. Corners of case may be round or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGURE 6. PINs M3928/10-08, M3928/10-10, and M3928/10-11 - Continued. Provided by I

25、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3928/10F 10 Dimensions Letter Inches Millimeters Letter Inches Millimeters Max Min Max Min Max Min Max Min A 1.80 - 45.7 - G 2.53 2.47 64.3 62.7 B .390 .370 9.91 9.40 H 2.78 2.72 70.6 69.1 C .32 - 8.1 - J .6

26、3 .57 16.0 14.5 D .166 .156 4.22 3.96 K .93 .87 23.6 22.1 E .890 .870 22.61 22.10 L .28 .22 7.1 5.6 F .890 .870 22.61 22.10 M .23 .17 5.8 4.3 NOTES: 1. Dimensions are in inches. 2. Metric equivalents (in millimeters) are given for general information only (1.00 inch = 25.4 mm). 3. Corners of case ma

27、y be round or square. 4. Unless otherwise specified, tolerances are .010 ( 0.25 mm) for three place decimals and .03 (0.8 mm) for two place decimals. FIGURE 7. PIN M3928/10-12.Position 1. (De-energized or failsafe position), C connects to NC connector. Position 2. (Energized position), C connects to

28、 NO connector. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AMSC N/A FSC 5985 TABLE I. Electrical and performance characteristics. PIN M3928/10- Fig. No. Hous-ing Con- fig. Manual or remote Sole-noid or motor Fail- safe or latch- ing Fre- quency r

29、ange dc to GHz VSWR Inser-tion loss (dB) Isola-tion (dB) Switch-ing time (ms) Posi-tion indicat-ing circuit Life cycles x 1000 Operat- ing voltage Pick- up volt- age Drop- out volt- age Operat-ing current (A) 1/ Holding current fail-safe type 1/ (A) Power and indicator connector Weight (oz) 2/ 01N,

30、S 3/ 02N, S 3/ 03N, S 3/ 04N, S 05N, S 06N, S 07N, S 08N, S 09N, S 10N, S 11N,S 12N, S 1 1 1 2 3 4 5 6 2 6 6 7 O O O E E H H H E H H E 1P2T 1P2T 1P2T 1P2T 1P2T 1P2T TR TR 1P2T TR TR 1P2T R R R R R R R R R R R R S S S S S S S S S S S S F F F F F F F F F L F F 5.2 5.2 5.2 12.4 12.4 12.4 12.4 12.4 12.4

31、 12.4 12.4 .96 to 1.215 max 1.4:1 1.4:1 1.4:1 1.5:1 1.5:1 1.5:1 5/ 1.5:1 5/ 1.5:1 5/ 1.5:1 1.5:1 5/ 1.5:1 1.2:1 max 0.48 0.48 0.48 0.5 0.5 0.5 6/ 0.5 6/ 0.5 6/ 0.5 0.5 6/ 0.5 0.3 min 25 25 25 60 60 25 7/ 25 7/ 60 7/ 60 60 60 60 max 20 20 20 50 50 20 30 4/ 20 30 4/ 30 50 20 20 30 None None None None

32、Yes None None Yes None Yes None None 1000 1000 1000 100 100 50 50 100 100 100 100 100 nom 110 V dc 28 V dc 115 V ac 28 V dc 28 V dc 28 V dc 28 V dc 28 V dc 115 V dc 28 V dc 28 V dc 28 V dc max 84 V dc 18 V dc 93 V ac 18 V dc 18 V dc 20 V dc 20 V dc 20 V dc 95 V ac 20 V dc 20 V dc 20 V dc min 10 V dc

33、 3 V dc 5 V ac 3 V dc 3 V dc 14 V dc 14 V dc 14 V dc 5 V ac - 14 V dc 14 V dc max 0.2 0.2 0.2 0.8 0.8 1.0 1.5 1.0 0.12 0.64 1.5 0.2 0.2 0.2 0.2 0.4 0.4 0.5 0.6 0.3 .12 - .25 0.2 Solder terminals Solder terminals Solder terminals Solder terminals Solder terminals see Fig 4 see Fig 5 see Fig 6 Solder

34、terminals see Fig 6 see Fig 6 Solder terminals max 8 (227) 8 (227) 8 (227) 8 (227) 8 (227) 12 (342) 16 (456) 16 (456) 8 (227) 12 (342) 12 (342) 8 (227) 1/ At nominal operating voltage and 20C. 2/ Mass in grams in parentheses. 3/ Open port is grounded. 4/ At low and high temperature extremes. 5/ The

35、VSWR at .225-.400 GHz for dash numbers 06 and 07 is 1.1:1. The VSWR at .100-.500 GHz for dash number 08 is 1.15:1. The VSWR at 4 GHz for dash number 10 is 1.25:1. 6/ The insertion loss at .225-.400 GHz for dash numbers 06 and 07 is 0.1 dB. The insertion loss at .100-.500 GHz for dash number 08 is 0.

36、15 dB. The insertion loss at 4 GHz for dash number 10 is 0.25 dB. 7/ The isolation at .225-.400 GHz for dash numbers 06 and 07 is 50 dB. The isolation at .100-.500 GHz for dash number 08 is 80 dB. 11MIL-DTL-3928/10FProvided by IHSNot for ResaleNo reproduction or networking permitted without license

37、from IHS-,-,-MIL-DTL-3928/10F 12 REQUIREMENTS: Dimensions and configurations: See figures 1 through 7. RF connectors: Female connectors shall mate with type N connectors in accordance with MIL-PRF-39012/1. Nominal impedance: 50 ohms. Termination: Open. RF power handling capability (average): 100 wat

38、ts for dash numbers 01 through 11 and 280 watts for dash number 12. RF connectors: Series N connectors shall mate with series N male connectors in accordance with MIL-PRF-39012/1. Electrical and performance characteristics: See table I. Vibration: Method I. Operating temperature: -55 C to +85 C. Par

39、t or Identifying Number (PIN): M3928/10- (dash number from table I). TABLE II. PIN to type cross-reference. PIN M3928/10- Type SA- /U 01 02 03 04 05 06 07 08 09 10 11 12 1360 1361 1362 - - - - - - - - - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

40、-MIL-DTL-3928/10F 13 Referenced documents: In addition to MIL-DTL-3928, this specification sheet also references MIL-PRF-39012/1. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity:

41、Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2013-002) DLA - CC Review activities: Army - MI Navy - AS, MC, OS, SH Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-