DLA MIL-DTL-3933 32-2010 ATTENUATORS FIXED COAXIAL CONNECTOR SPACE LEVEL NON SPACE LEVEL TYPE 2 92 mm (SMK) FREQUENCY RANGE DC TO 42 GHz CLASS III LOW POWER.pdf

1、AMSC N/A FSC 5985 MIL-DTL-3933/32 10 August 2010 DETAIL SPECIFICATION SHEET ATTENUATORS, FIXED COAXIAL CONNECTOR SPACE LEVEL, NON SPACE LEVEL TYPE 2.92 mm (SMK) FREQUENCY RANGE: DC TO 42 GHz, CLASS III, LOW POWER This specification is approved for use by all Departments and Agencies of the Departmen

2、t of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-3933. NOTES: 1. Dimension A, 1.50 0.02 (38 0.5). 2. Dimensions are in inches. 3. Metric equivalents are given in parentheses for general information only. FIGURE 1. Dimensi

3、ons and configuration. INCH-POUND 2.92 mm (SMK) 2.92 mm (SMK) .25 (6.35) DIA Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/32 2 ENGINEERING DATA: Operating frequency range: DC to 42 gigahertz (GHz) (see table I). Test frequency range f

4、or SWR and attenuation measurements, measured or recorded, when using an Automatic Network Analyzer (ANA) or equivalent test equipment: 100 MHz (or lower) to 42 GHz. Basic test frequency for sensitive measurements like temperature sensitivity, power sensitivity, and any other measurements where a de

5、lta specification is imposed: 21 GHz. Operating temperature range: -55 C to +100 C. Weight: 0.30 ounces (8 g) maximum. REQUIREMENTS: Dimensions and configuration: See figure 1. Nominal impedance: 50 ohms. Attenuation: See table I. Stability and sensitivity: Maximum attenuation change after: Up to 10

6、 dB, inclusive (dB) Over 10 dB (dB/dB) Temperature change/ thermal shock 0.05 0.005 Vibration or shock 0.1 0.01 Moisture resistance or salt spray 0.2 0.02 Peak power 0.05 0.005 Temperature sensitivity of attenuation, maximum: 0.0004 dB/dB/C. Power: See table I. Power sensitivity for full input power

7、, maximum: 0.004 dB/dB/Watt. VSWR: See table I. Part or Identifying Number (PIN): M3933/32- (and dash number from table I with three device level designators are space level (T), screened (S) and non-screened (N) options). Provided by IHSNot for ResaleNo reproduction or networking permitted without

8、license from IHS-,-,-AMSC N/A FSC 5985 TABLE I. Electrical characteristics. Dash number Attenuation (dB) Maximum power Input VSWR maximum 1/ Dimension A in inche(mm) 0.02 (0.5) Nominal Deviation DC to 26.5 GHz 26.5 to 42 GHz DC to 26.5 GHz 26.5 to 42 GHz AV (W) at 25C2/ (continuously)Peak 3/ (kW) 01

9、 N S T 3 0.50 1.00 2 0.2 1.25:1 1.45:1 1.50 (38) 02 N S T 6 0.50 1.00 2 0.2 1.25:1 1.45:1 1.50 (38) 03 N S T 10 0.8 1.5 2 0.2 1.25:1 1.45:1 1.50 (38) 04 N S T 20 0.8 1.5 2 0.2 1.25:1 1.45:1 1.50 (38) 05 N S T 30 0.8 1.5 2 0.2 1.25:1 1.45:1 1.50 (38) 1/ VSWR value is for both ends. 2/ Power rating de

10、rated linearly to 0.2 watts at 100C. 3/ Peak power : 200 watts at 5 x 10-4 duty cycle, 5 microseconds pulsewidth. MIL-DTL-3933/323Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/32 4 Referenced documents. This specification sheet only re

11、ferences MIL-DTL-3933. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2010-007) DLA - CC Review activities: Army - MI Navy - AS, MC, SH Air Force - 99 Civil agencies: NASA - NA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-