DLA MIL-DTL-43734E-2005 CLOTH DUCK TEXTURED NYLON - USERS SHOULD USE MIL-C-43734D UNTIL REVISION F IS FINALIZED AND PUBLISHED.pdf

1、 ADMINISTRATIVE NOTICE INCH POUND MIL-DTL-43734E NOTICE 1 24 March 2006 DETAIL SPECIFICATION CLOTH, DUCK, TEXTURED NYLON MIL-DTL-43734E, dated 22 September 2005, contains errors and should not be used. Users should destroy all copies of MIL-DTL-43734E. Users should use MIL-C-43734D until Revision F

2、is finalized and published. (Copies of this document are available online at http:/assist.daps.dla.mil/quick search/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) Custodians: Preparing activity: Army GL DLA CT Navy NU Air Force - 11 N

3、OTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at http:/assist.daps.dla.mil .AMSC N/A FSC 8305 DISTRIBUTION ST

4、ATEMENT A: Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-INCH-POUNDMIL-DTL-43734E 22 September 2005 SUPERSEDING MIL-C-43734D 20 August 1987 DETAIL SPECIFICATION CLOTH, DUCK, TEXTURED NYLON Thi

5、s specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This document covers textured nylon duck cloth, dyed or dyed and overprinted with the specified camouflage pattern. 1.2 Classification. (see 6.2). Type I - 1,000 denier textured yarn

6、 Type II - 725 denier textured yarn Type III - 500 denier textured yarn Class 1 - Dyed Class 2 - Dyed, Water Repellent Treated and Coated Class 3 - Woodland Camouflage Printed, Water Repellent Treated, and Coated Class 4 - Desert Camouflage Printed (3 color), Water Repellent Treated, and Coated Clas

7、s 5 - Marine Pattern (MARPAT) Woodland Camouflage, Water Repellent Treated, and Coated Class 6 - Marine Pattern (MARPAT) Desert Camouflage, Water Repellent Treated, and Coated Class 7 - Universal Camouflage Printed, Water Repellent Treated, and Coated 2.1 General. The documents listed in this sectio

8、n are specified in sections 3, 4, or 5 of this Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COET (Bldg 6), 700 Robbins Avenue, Philadelphia, PA 19111-5092 or emailed to: http:/ct.dscp.dl

9、a.mil. Since contact information can change, you may want to verify the currency of this address information using ASSIST online database at http:/assist.daps.dla.mil . AMSC N/A FSC 8305 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43734E

10、2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 or 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has bee

11、n made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 or 4 of this specification, whether or not they are listed.2.2 Government documents. 2.2.1 Specifications standards and handbooks. The followin

12、g specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2). FEDERAL STANDARDS FED-STD-4 - Glossary of Fabric Imperfections DEPARTMENT OF DE

13、FENSE STANDARDS MIL-STD-1487 Glossary of Cloth Coating Imperfections (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)2.2.2 Other Government documen

14、ts, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation or contract. DRAWINGS U.S. ARMY RESEARCH DEVELOPMENT AND ENGINE

15、ERING COMMAND 2-1-1516 - Woodland Camouflage Pattern 2-1-2240 - Desert Pattern 2-1-2519 - Universal Camouflage Pattern 2-1-2525 - Woodland MARPAT Pattern 4 color (Coyote 476) 2-1-2526 - Woodland MARPAT Pattern 4 color (Green 474 with EGA symbol) 2-1-2527 - Woodland MARPAT Pattern 4 color (Black 477)

16、 2-1-2528 - Woodland MARPAT Pattern 4 color (Khaki 475) 2-1-2529 - Desert MARPAT 4 color (Light Tan 479) 2-1-2530 - Desert MARPAT 4 color (Urban Tan 478) 2-1-2531 - Desert MARPAT 4 color (Light Coyote 481 with EGA symbol) 2-1-2532 - Desert MARPAT 4 color (Highland 480) (Copies of drawings are availa

17、ble from the Natick Soldier Center, ATTN: AMSRD-NSC-IP-E, Natick, MA 01760-5019.) 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43734E FEDERAL TRADE COMMISSION Rules and Regulations Under the Textile Fiber Products Identification Act (Copi

18、es are available online at www.ftc.gov or from the Federal Trade Commission, 600 Pennsylvania Avenue, N.W., Washington, DC 20580-0001.) 2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of thes

19、e documents are those cited in the solicitation or contract (see 6.2). AMERICAN SOCIETY FOR QUALITY ANSI/ASQ Z1.4 - Sampling Procedures and Tables for Inspection of Attributes (Copies are available online at http:/www.asq.org or from the American Society for Quality, 600 North Plankinton Avenue, Mil

20、waukee, WI 53203-2914.) AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC Test Method 8 - Colorfastness to Crocking: AATCC Crockmeter Method AATCC Test Method 15 - Colorfastness to Perspiration AATCC Test Method 16 - Colorfastness to Light AATCC Test Method 22 - Water Repellency S

21、pray Test AATCC Test Method 61 - Colorfastness to Laundering, Home and Commercial: Accelerated AATCC Test Method 70 - Water Repellency: Tumble Jar Dynamic Absorption Test AATCC Test Method 81 - pH of the Water Extract from Wet Processed Textiles AATCC Test Method 96 - Dimensional Changes in Commerci

22、al Laundering of Woven and Knitted Fabrics Except Wool AATCC Test Method 118 - Oil Repellency: Hydrocarbon Resistance Test AATCC Test Method 119 - Color Change Due to Flat Abrasion (Frosting): Screen Wire Method AATCC Test Method 127 - Water Resistance: Hydrostatic Pressure Test AATCC Test Method 16

23、9 - Weather resistance of Textiles Xenon Lamp Exposure AATCC Evaluation Procedure 1 - Gray Scale for Color Change AATCC Evaluation Procedure 2 - Gray Scale for Staining AATCC Evaluation Procedure 8 - AATCC 9-Step Chromatic Transference Scale AATCC Evaluation Procedure 9 - Visual Assessment of Color

24、Difference of Textiles (Copies of documents are available on line at www.aatcc.org or from the American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215.) ASTM INTERNATIONAL ASTM-D-737 - Standard Test Method for Air Permeability of Textile Fabrics

25、3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43734E ASTM-D-747 - Standard Test Method for Apparent Bending Modulus of Plastics by means of a Cantilever Beam ASTM-D-751 - Standard Test Methods for Coated Fabrics ASTM-D-3775 - Standard Test

26、 Method for Fabric Count of Woven Fabric ASTM-D-3776 - Standard Test Methods for Mass per Unit Area (Weight) of Fabric ASTM-D-5034 - Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Grab Test) (Copies of documents are available online at www.astm.org or from the ASTM Intern

27、ational, 100 Barr Harbor Drive, West Conshohocken, PA. 19428-2959.) 2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and reg

28、ulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see 4.2). 3.2 Standard sample. The finished cloth shall match the standard sample for shade and appearance, and shall, unless

29、otherwise indicated, be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced (see 6.3). 3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used

30、 to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.4 Material. 3.4.1 Yarn. The yarn shall be textured continuous filament nylon in the denier required to meet the requir

31、ements of this document. 3.5 Color. 3.5.1 Classes 1 and 2. The color of the finished cloth shall be as specified (see 6.2). 3.5.2 Class 3, Woodland Camouflage. The cloth shall be dyed to a ground shade either matching or approximating Light Green 354 and then overprinting with the camouflage pattern

32、 by roller or screen printing. When the ground shade is dyed to match Light Green 354, the remaining colors shall be obtained by subsequent printing using three rollers or screens, as appropriate for the Dark Green 355, Brown 356, and Black 357 areas of the pattern. When the ground shade is dyed to

33、approximate Light Green 354, all four colors of the camouflage pattern shall be obtained by subsequent printing using four rollers or screens to match all four colors. 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43734E 3.5.3 Class 4, Des

34、ert Camouflage. The color of class 4 finished cloth shall be the three color Desert Camouflage Pattern. The cloth shall be dyed to a ground shade either matching or approximating Light Tan 492 and then overprinted with the camouflage pattern by roller or automatic screen printing. When the ground sh

35、ade is dyed to match Light Tan 492, the remaining colors shall be obtained by subsequent printing using two rollers or screens as appropriate for the Light Brown 493 and Light Khaki 494 areas of the pattern. When the ground shade is dyed to approximate Light Tan 492, all three colors of the camoufla

36、ge pattern shall be obtained by subsequent printing using three rollers or screens to match all three colors. 3.5.4 Class 5, MARPAT Woodland Camouflage. The color of class 5 shall be four color MARPAT Woodland Camouflage, printed in Green 474, Khaki 475, Coyote 476 and Black 477. 3.5.5 Class 6, MARP

37、AT Desert Camouflage. The color of the class 6 cloth shall be four color MARPAT Desert Camouflage printed in Urban Tan 478, Light Tan 479, Highland 480, and Light Coyote 481. 3.5.6 Class 7, Universal Camouflage. The color of class 7 finished cloth shall be the Universal Camouflage Pattern. The cloth

38、 shall be dyed to a ground shade either matching or approximating Desert Sand 500 and then overprinted with the camouflage pattern by roller or screen printing. When the ground shade is dyed to match Desert Sand 500, the remaining colors shall be obtained by subsequent printing using two rollers or

39、rotary screens as appropriate for the Urban Gray 501 and Foliage Green 502 areas of the pattern. When the ground shade is dyed to approximate Desert Sand 500, all three colors of the camouflage pattern shall be obtained by subsequent printing using three rollers or rotary screens to match all three

40、colors. 3.5.7 Labile Sulfur. Use of dyes and compounds containing elementary sulfur capable of oxidation to sulfuric acid is not permitted. 3.5.8 Visual color matching (all Classes). The color and appearance of the cloth shall match the standard sample when viewed using the AATCC Evaluation Procedur

41、e 9, Option A, under filtered tungsten lamps that approximate artificial daylight D75 illuminant with a color temperature of 7500K +200, illumination of 100 ( 20) foot candles, and shall be a good match to the standard sample under horizon lamplight at 2300 200. 3.5.9 Colorfastness. The finished clo

42、th shall conform to the colorfastness requirements listed below in Table I when tested as specified in 4.4.3. 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43734E TABLE I. Colorfastness requirements . Colors Evaluation Laundering (3 cycles

43、) 1/ (min.) Light (40 hrs or 170 kJ) 2/ min.) Perspiration (acid the pattern on the finished cloth for Class 4 shall match that of Drawing 2-1-2240 and the pattern on the finished cloth for Class 5 shall match that of Drawings 2-1-2525 through 2-1-2528 and Class 6 shall match that of Drawings 2-1-25

44、29 through 2-1-2532. The finished cloth for Class 7 shall match that of drawing 2-1-2519 (see 2.2.2, 6.2, and 6.3). 3.7 Spectral reflectance, Class 1, and 2. The spectral reflectance values for the solid color specified shall conform to the requirements specified in Table II when tested as specified

45、 in 4.4.3. 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43734E TABLE II. Spectral reflectance requirements, Classes 1, and 2. Reflectance values (percent) Wavelength, Coyote 498 Camouflage Green 483 Tan 380 Nanometers(nm) Min Max Min Max

46、Min Max600 8 20 3 10 - - 620 8 20 3 10 - - 640 8 22 3 10 - - 660 8 24 3 12 - - 680 10 24 3 14 - - 700 14 24 4 28 25 53 720 16 28 5 40 25 54 740 20 34 10 52 25 55 760 30 44 18 56 26 56 780 40 50 20 56 27 57 800 45 56 24 58 28 58 820 50 58 30 60 30 59 840 52 58 38 60 33 62 860 52 62 40 60 36 65 3.7.1

47、Spectral reflectance, (Class 3, and 5) The spectral reflectance values for each color in the Woodland Camouflage printed cloth shall conform to the requirements specified in Table III when tested as specified in 4.4.3. TABLE III. Spectral reflectance requirements, Classes 3, and 5.Reflectance values (percent) Wavelength, Light Green 354 Or Coyote 476 Dark Green 355 and Brown 356 or Green 474 and Khaki 475 Black 357 or Black 477 Nanometers(nm) Min. Max. Min. Max. Max. 600 8 20 3