DLA MIL-DTL-45918 A-2009 CLEVISES AND CONNECTORS (ROD END).pdf

1、MIL-DTL-45918A 18 May 2009 SUPERSEDING MIL-C-45918 4 December 1968 DETAIL SPECIFICATION CLEVISES AND CONNECTORS (ROD END) This specification is mandatory for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers adjustable and plain rod end c

2、levises and rod end connectors. 1.2 Classification. Clevises and connectors are of the following types, styles, sizes, and compositions, as specified (see 6.2). 1.2.1 Types and styles. Type I - Adjustable clevis Style 1 - Wide fork (NASM27975 and NASM35812) Style 2 - Narrow fork (NASM27975) Type II

3、- Plain clevis Style 1 Wide fork (NASM27976 and NASM35812) Style 2 Narrow fork (NASM27976) Type III - Connector Style 1 - Plain (MS35813) Style 2 - Rigid linkage (A-A-52493) Style 3 - Threaded (AS49011) 1.2.2 Sizes. Clevises and connectors are of the sizes listed in the applicable part standard. 1.2

4、.3 Compositions. Clevises and connectors are made of the compositions listed on the applicable part standard and in accordance with 3.1. AMSC N/A FSC 5340 INACTIVE FOR NEW DESIGN AFTER 4 February 1999. Comments, suggestions, or questions on this document should be addressed to Defense Supply Center

5、Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or e-mail to dscpg Army - AR DLA-IS Navy - AS Air Force - 99 (Project No. 5340-2009-015) Reviewer activities: Army - AT, AV, CR4, GL, MI Navy - MC, SH NOTE: The activities listed above were interested in this docum

6、ent as of the date of this document. Since organizations and responsibilities can change. You should verify the currency of the information above using the ASSIST online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-