1、INCH-POUND MIL-DTL-5423/9F 17 February 2009 SUPERSEDING MIL-DTL-5423/9E 4 February 2008 DETAIL SPECIFICATION SHEET BOOTS, DUST AND WATER SEAL, TYPE C (FOR USE AS ROTARY-SHAFT SEALS), TYPE CS (FOR USE AS RFI-SHIELDED, ROTARY-SHAFT SEALS) This specification sheet is approved for use by all Departments
2、 and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5423. AMSC N/A FSC 5930 1/ Height for size 10 seal is .359 (9.12 mm). Size For use with shaft size .004 (.10) Insert thread Hex size 1 2 4 6 7
3、 9 10 .125 (3.18 mm) .250 (6.35 mm) .125 (3.18 mm) .250 (6.35 mm) .375 (9.53 mm) .250 (6.35 mm) 1/ .250 (6.35 mm) .375-32 UNEF-2B .375-32 UNEF-2B .250-32 UNEF-2B .469-32 UNS-2B .625-24 UNEF-2B .500-32 UN-2B .375-32 UNEF-2B .500 (12.70 mm) .500 (12.70 mm) .375 ( 9.53 mm) .625 (15.88 mm) .750 (19.05 m
4、m) .625 (15.88 mm) .500 (12.70 mm) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only and are based upon 1 inch = 25.4 mm. 3. Unless otherwise specified, tolerances are .015 (0.38 mm) for three place decimals and .02 (0.51 mm) for two place decimals. 4.
5、Monel in accordance with QQ-N-281, class A or equivalent. FIGURE 1. Dimensions and configuration boots type B, style 2 and style 2S. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-5423/9F 2 REQUIREMENTS Dimensions and configuration: See figu
6、re 1. Silicon rubber: Grade 60 Part or Identifying Number (PIN): See table I. TABLE I. PINs, size, and type. Size PIN M5423/09- Type C Type CS 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 2 4 6 7 9 - - - - - - 10 - - - - - - - 1 2 4 6 7 1/ 9 - 10 1/ Inactive for new design. Qualification: First Artic
7、le Testing in accordance with MIL-DTL-5423. The margins of this specification are marked with vertical lines to indicate where modifications were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contract
8、ors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Referenced documents: MIL-DTL-5423 QQ-N-281 Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5930-2008-065) DLA - CC Review activiti
9、es: Army AR, AT, AV, CR4, EA, MI Navy CG, EC, MC, OS Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1