DLA MIL-DTL-641 13 D-2013 JACKS TELEPHONE TYPES JJ-092 JJ-093 JJ-096 AND JJ-097.pdf

1、AMSC N/A FSC 5935 MIL-DTL-641/13D 15 November 2013 SUPERSEDING MIL-J-641/13C 03 July 1973 DETAIL SPECIFICATION SHEET JACKS, TELEPHONE TYPES JJ-092, JJ-093, JJ-096, AND JJ-097 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acq

2、uiring the product described herein shall consist of this specification sheet and MIL-DTL-641. FIGURE 1. Dimensions and configuration. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-641/13D 2 NOTES: 1. Dimensions are in inches. 2.

3、 Metric equivalents are given for information only. 3. The jacks are not generally used for multiple mounting. 4. The schematic shows required switching operations but does not indicate a required mechanical arrangement of the parts. FIGURE 1. Dimensions and configuration - Continued. TABLE I. Dimen

4、sions. REQUIREMENTS: Dimensions and configuration: See figure 1 and table I. Insertion and withdraw forces shall be as follows. Insertion force - 7 pounds (maximum). Withdraw force - 1.5 pounds (minimum). - 7 pounds (maximum). Spring life test is applicable. Test plug TP55, in accordance with MIL-DT

5、L-641, shall be used. The Part or Identifying Number (PIN) consists of the letter M, the basic specification number, the specification sheet number, and a number for jack type. (see table II) M 641 /13 - 1 Type designation Specification sheet number Specification number M prefix PIN example: M641/13

6、-1 indicates type JJ-092 telephone jack. Inches mm Inches mm Inches mm .002 0.05 .094 2.39 0.688 17.48 .005 0.13 0.2515 6.39 0.750 19.05 .015 0.38 0.375 9.53 0.781 19.84 .016 0.41 0.500 12.70 1.015 25.78 .020 0.51 0.562 14.27 1.312 33.32 .062 1.57 0.625 15.88 1.750 44.45 Type Dimension A JJ-92 .688

7、JJ-93 .781 JJ-96 .562 JJ-97 .625 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-641/13D 3 TABLE II. PIN. Dash number Type designation Connection Mounting Switching action upon insertion of plug 1/ 1 JJ-92 Tip and sleeve Bushing One break mak

8、e 2 JJ-93 One break, one make 3 JJ-96 None 4 JJ-97 One break 1/ The hyphen indicates sequence. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-641. CONCLUD

9、ING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy EC Air Force 85 (Project 5935-2013-038) DLA - CC Review activities: Army AR, AT, CR4, MI Navy AS, MC, OS, SH Air Force 11, 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-