DLA MIL-DTL-83723 65 F-2010 CONNECTOR ELECTRIC (CIRCULAR ENVIRONMENT RESISTING) RECEPTACLE (SINGLE HOLE MOUNT BAYONET COUPLING PIN CONTACT) (SERIES III CLASS H).pdf

1、 MIL-DTL-83723/65F 1 October 2010 SUPERSEDING MIL-DTL-83723/65E 15 September 2006 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRIC, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, PIN CONTACT), (SERIES III, CLASS H) This specification is approved for use by all Dep

2、artments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networkin

3、g permitted without license from IHS-,-,-MIL-DTL-83723/65F 2 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/65F 3 Shell size A B C D F G H N thread UNEF-2A 8 .481 .461 .137 .097 .428

4、 .433 .312 .561 .536 .531 .589 .625-20 10 .481 .461 .137 .097 .530 .535 .388 .696 .659 .654 .589 .750-20 12 .481 .461 .137 .097 .700 .705 .558 .875 .829 .824 .589 .9375-20 14 .481 .461 .137 .097 .769 .774 .627 .935 .898 .893 .589 1.000-20 16 .481 .461 .137 .097 .869 .901 .772 1.062 1.025 1.020 .589

5、1.125-18 18 .481 .461 .137 .097 1.002 1.007 .860 1.187 1.131 1.126 .589 1.250-18 20 .481 .461 .137 .097 1.127 1.132 .985 1.312 1.256 1.251 .589 1.375-18 22 .481 .461 .168 .128 1.252 1.257 1.110 1.437 1.381 1.376 .589 1.500-18 24 .481 .461 .168 .128 1.377 1.382 1.235 1.562 1.506 1.501 .589 1.625-18 F

6、IGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/65F 4 Shell size U V S +.005 - .000 W EE FF GG JJ 8 .670 .979 .508 1.068 .605 .635 .125 .062 .596 .590 10 .777 1.104 .636 1.192 .730 .76

7、0 .125 .062 .721 .715 12 .965 1.291 .806 1.380 .917 .947 .125 .062 .908 .902 14 1.090 1.391 .875 1.505 .980 1.010 .125 .062 .971 .965 16 1.215 1.516 1.002 1.630 1.105 1.135 .125 .062 1.096 1.090 18 1.340 1.641 1.108 1.756 1.225 1.260 .125 .062 1.220 1.214 20 1.465 1.766 1.233 1.860 1.350 1.385 .125

8、.062 1.345 1.339 22 1.574 1.954 1.358 2.086 1.475 1.510 .125 .062 1.470 1.464 24 1.669 2.079 1.483 2.160 1.600 1.635 .125 .062 1.595 1.589 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83

9、723/65F 5 Inches mm Inches mm Inches mm Inches mm Inches mm .005 .008 .015 .018 .019 .020 .022 .032 .048 .054 .062 .068 .071 .074 .076 .084 .089 .090 .091 .093 .094 .097 .098 .101 .106 .109 .112 .125 .128 .137 .138 .140 .144 .146 .168 .198 0.13 0.20 0.38 0.46 0.48 0.51 0.56 0.81 1.22 1.37 1.57 1.73

10、1.80 1.88 1.93 2.13 2.26 2.29 2.31 2.36 2.39 2.46 2.49 2.57 2.69 2.77 2.84 3.18 3.25 3.48 3.51 3.56 3.66 3.71 4.27 5.03 .204 .225 .269 .312 .366 .376 .378 .380 .388 .392 .428 .433 .461 .481 .490 .508 .530 .531 .535 .536 .539 .540 .558 .560 .561 .589 .590 .596 .625 .627 .635 .636 .654 .659 .670 .696

11、5.18 5.72 6.83 7.92 9.30 9.55 9.60 9.65 9.86 9.96 10.87 11.00 11.71 12.22 12.45 12.90 13.46 13.49 13.59 13.61 13.69 13.92 14.17 14.22 14.25 14.96 14.99 15.14 15.88 15.93 16.13 16.15 16.61 16.74 17.02 17.68 .700 .705 .715 .721 .730 .760 .761 .769 .772 .774 .777 .781 .806 .824 .829 .860 .875 .893 .896

12、 .898 .901 .902 .908 .917 .935 .947 .965 .971 .979 .980 .985 1.002 1.007 1.010 1.020 1.025 17.78 17.91 18.16 18.31 18.44 19.30 19.33 19.53 19.61 19.66 19.74 19.84 20.47 20.93 21.06 21.84 22.23 22.68 22.76 22.81 22.89 22.91 23.06 23.29 23.75 24.05 24.51 24.66 24.87 24.89 25.02 25.45 25.58 25.65 25.91

13、 26.04 1.062 1.068 1.090 1.096 1.104 1.105 1.108 1.110 1.126 1.127 1.131 1.132 1.135 1.142 1.187 1.192 1.214 1.215 1.220 1.223 1.225 1.235 1.251 1.252 1.256 1.257 1.260 1.291 1.312 1.339 1.340 1.345 1.350 1.358 1.370 1.376 26.97 27.13 27.69 27.84 28.04 28.07 28.14 28.19 28.60 28.63 28.73 28.75 28.83

14、 29.01 30.15 30.28 30.84 30.86 30.99 31.06 31.12 31.37 31.78 31.80 31.90 31.93 32.00 32.79 33.32 34.01 34.04 34.16 34.29 34.49 34.80 34.95 1.377 1.380 1.381 1.382 1.385 1.391 1.437 1.455 1.464 1.465 1.470 1.475 1.483 1.501 1.505 1.506 1.510 1.516 1.562 1.574 1.589 1.595 1.600 1.630 1.635 1.641 1.669

15、 1.756 1.766 1.860 1.954 2.068 2.079 2.160 34.98 35.05 35.08 35.10 35.18 35.33 36.50 36.96 37.19 37.21 37.34 37.47 37.67 38.13 38.23 38.25 38.35 38.51 39.67 39.98 40.36 40.51 40.64 41.40 41.53 41.68 42.39 44.60 44.86 47.24 49.63 52.53 52.81 54.86 NOTES: 1. Dimensions are in inches. 2. Metric equival

16、ents are given for information only. 3. Unless otherwise specified, tolerances are .005 inches (0.13 mm) for three place decimals, .01 inches (0.25 mm) for two place decimals, and 1 for all angles. 4. Fully coupled indicator grooves shall be color coded blue, .025 .010 inches (0.635 0.254 mm) wide.

17、5. Three pins to be within .004 inches (0.102 mm) either side of true position (TP) relative to master polarizing keyway. 6. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 7. See table I for contact cavities requiring these dimensions. FIGURE 1. Dimensions an

18、d configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/65F 6 REQUIREMENTS: Dimensions and configuration: See figure 1. This connector mates with MIL-DTL-83723/75 and /77. For insert arrangements see MIL-STD-1554 a

19、nd table I. TABLE I. Insert arrangements requiring reduced diameters for raised seal barriers on contact cavities as indicated. Shell size Insert arrangements Contact cavities 8 03 1, 2, 3 10 06 1, 2, 3, 4, 5, 6 Contacts: Crimp socket termination in accordance with SAE-AS39029/22. Connector accessor

20、ies: SAE-AS85049. O-ring shall be furnished with connector. Part or Identifying Number (PIN) example: M 83723/65 H 22 55 N Military designation Specification sheet number Class Shell size Insert arrangement Polarizing position Changes from previous issue. Marginal notations are not used in this revi

21、sion to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-DTL-83723/75 MIL-DTL-83723/77 MIL-STD-1554 MS3186 SAE-AS39029/22 SAE-AS85049 Provided by IHSNot for ResaleNo r

22、eproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/65F 7 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force 85 DLA - CC Review activities: (Project 5935- 2010-046) Air Force - 19, 99 NOTE: The activities listed above were interested

23、 in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-