DLA MIL-DTL-83723 84 F-2009 CONNECTORS ELECTRICAL (CIRCULAR ENVIRONMENT RESISTING) RECEPTACLE (SINGLE HOLE MOUNT THREADED COUPLING CRIMP SOCKET CONTACT) (SERIES III CLASSES A G K M.pdf

1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, THREADED COUPLING, CRIMP SOCKET CONTACT), (SERIES III, CLASSES A, G, K, M, N, R, S, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Departm

2、ent of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Classes A, G, K, M, R, T, W and Z. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/84F 1 October 2009 SUPERSEDING MIL-C-83723/84E 30 June 1992 Provided by IHS

3、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 2 FIGURE 1. Classes A, G, K, M, R, T, W and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 3 Inches mm Inches mm In

4、ches mm Inches mm Inches mm .005 0.08 .198 4.27 .705 17.19 1.090 27.69 1.380 35.05 .008 0.20 .204 5.18 .715 18.16 1.096 27.84 1.382 35.10 .010 0.25 .281 7.14 .721 18.31 1.104 28.04 1.385 35.18 .015 0.38 .290 7.37 .726 18.44 1.105 28.07 1.391 35.33 .018 0.46 .329 8.36 .730 18.54 1.107 28.12 1.437 36.

5、50 .019 0.48 .340 8.64 .754 19.15 1.108 28.14 1.464 37.19 .020 0.51 .351 8.92 .760 19.30 1.110 28.19 1.470 37.34 .022 0.56 .388 9.86 .761 19.33 1.112 28.24 1.479 37.57 .025 0.64 .394 10.01 .769 19.53 1.127 28.63 1.482 37.64 .032 0.81 .413 10.49 .772 19.61 1.132 28.75 1.483 37.67 .035 0.89 .418 10.62

6、 .774 19.66 1.135 28.83 1.485 37.72 .042 1.07 .424 10.77 .781 19.84 1.161 29.49 1.510 38.35 .046 1.17 .433 11.00 .796 20.22 1.171 29.74 1.516 38.51 .048 1.22 .443 11.25 .806 20.47 1.187 30.15 1.562 39.67 .054 1.37 .461 11.71 .860 21.84 1.192 30.28 1.589 40.36 .061 1.55 .479 12.17 .875 22.22 1.214 30

7、.84 1.595 40.51 .062 1.57 .481 12.22 .881 22.37 1.220 30.99 1.604 40.74 .063 1.60 .482 12.24 .896 22.76 1.229 31.22 1.607 40.82 .065 1.65 .490 12.45 .901 22.89 1.233 31.32 1.609 40.87 .069 1.75 .515 13.08 .902 22.91 1.235 31.37 1.610 40.89 .071 1.80 .518 13.16 .908 23.06 1.237 31.38 1.635 41.53 .076

8、 1.93 .530 13.46 .917 23.29 1.240 31.42 1.641 41.68 .078 1.98 .535 13.59 .936 23.77 1.252 31.80 1.732 43.99 .084 2.13 .558 14.17 .947 24.05 1.257 31.93 1.735 44.07 .089 2.26 .562 14.27 .949 24.10 1.260 32.00 1.766 44.86 .090 2.29 .580 14.70 .965 24.51 1.291 32.79 1.795 45.59 .092 2.34 .590 14.99 .97

9、1 24.66 1.295 32.89 1.920 48.77 .093 2.36 .596 15.14 .980 24.89 1.296 32.92 1.923 48.84 .097 2.46 .605 15.37 .984 24.99 1.312 33.32 1.954 49.63 .098 2.49 .622 15.80 .985 25.02 1.320 33.53 2.045 51.94 .100 2.54 .627 15.93 .987 25.07 1.339 34.01 2.047 51.99 .101 2.57 .635 16.13 .991 25.17 1.340 34.04

10、2.048 52.02 .106 2.69 .636 16.15 1.002 25.45 1.345 34.16 2.078 52.78 .112 2.84 .646 16.41 1.007 25.58 1.349 34.26 2.079 52.81 .125 3.18 .648 16.46 1.010 25.65 1.354 34.39 2.152 54.66 .130 3.30 .670 17.02 1.046 26.57 1.357 34.47 2.182 55.42 .137 3.48 .685 17.40 1.047 26.59 1.358 34.49 .138 3.51 .696

11、17.68 1.062 26.97 1.360 34.54 .144 3.66 .700 17.78 1.073 27.25 1.362 34.59 .160 4.06 .701 17.81 1.078 27.38 1.377 34.98 FIGURE 1. Classes A, G, K, M, R, T, W and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 4 NOTES

12、: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Coupling indicator line shall be color coded red. 5. Rear acces

13、sory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 6. Shell size 8 will not mate with MIL-DTL-26500 connectors. 7. Phantomed configuration optional. 8. See table I for contact cavities requiring this dimension. 9. The centerline of indicated projection must be located on v

14、ertical centerline 2. FIGURE 1. Classes A, G, K, M, R, T, W and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 5 FIGURE 2. Classes N and S. Provided by IHSNot for ResaleNo reproduction or networking permitted without

15、 license from IHS-,-,-MIL-DTL-83723/84F 6 FIGURE 2. Classes N and S - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 7 Inches mm Inches mm Inches mm Inches mm Inches mm .005 0.08 .198 4.27 .705 17.19 1.090 27.69 1.380 35

16、.05 .008 0.20 .204 5.18 .715 18.16 1.096 27.84 1.382 35.10 .010 0.25 .281 7.14 .721 18.31 1.104 28.04 1.385 35.18 .015 0.38 .290 7.37 .726 18.44 1.105 28.07 1.391 35.33 .018 0.46 .329 8.36 .730 18.54 1.107 28.12 1.437 36.50 .019 0.48 .340 8.64 .754 19.15 1.108 28.14 1.464 37.19 .020 0.51 .351 8.92 .

17、760 19.30 1.110 28.19 1.470 37.34 .022 0.56 .388 9.86 .761 19.33 1.112 28.24 1.479 37.57 .025 0.64 .394 10.01 .769 19.53 1.127 28.63 1.482 37.64 .032 0.81 .413 10.49 .772 19.61 1.132 28.75 1.483 37.67 .035 0.89 .418 10.62 .774 19.66 1.135 28.83 1.485 37.72 .042 1.07 .424 10.77 .781 19.84 1.161 29.49

18、 1.510 38.35 .046 1.17 .433 11.00 .796 20.22 1.171 29.74 1.516 38.51 .048 1.22 .443 11.25 .806 20.47 1.187 30.15 1.562 39.67 .054 1.37 .461 11.71 .860 21.84 1.192 30.28 1.589 40.36 .061 1.55 .479 12.17 .875 22.22 1.214 30.84 1.595 40.51 .062 1.57 .481 12.22 .881 22.37 1.220 30.99 1.604 40.74 .063 1.

19、60 .482 12.24 .896 22.76 1.229 31.22 1.607 40.82 .065 1.65 .490 12.45 .901 22.89 1.233 31.32 1.609 40.87 .069 1.75 .515 13.08 .902 22.91 1.235 31.37 1.610 40.89 .071 1.80 .518 13.16 .908 23.06 1.237 31.38 1.635 41.53 .076 1.93 .530 13.46 .917 23.29 1.240 31.42 1.641 41.68 .078 1.98 .535 13.59 .936 2

20、3.77 1.252 31.80 1.732 43.99 .084 2.13 .558 14.17 .947 24.05 1.257 31.93 1.735 44.07 .089 2.26 .562 14.27 .949 24.10 1.260 32.00 1.766 44.86 .090 2.29 .580 14.70 .965 24.51 1.291 32.79 1.795 45.59 .092 2.34 .590 14.99 .971 24.66 1.295 32.89 1.920 48.77 .093 2.36 .596 15.14 .980 24.89 1.296 32.92 1.9

21、23 48.84 .097 2.46 .605 15.37 .984 24.99 1.312 33.32 1.954 49.63 .098 2.49 .622 15.80 .985 25.02 1.320 33.53 2.045 51.94 .100 2.54 .627 15.93 .987 25.07 1.339 34.01 2.047 51.99 .101 2.57 .635 16.13 .991 25.17 1.340 34.04 2.048 52.02 .106 2.69 .636 16.15 1.002 25.45 1.345 34.16 2.078 52.78 .112 2.84

22、.646 16.41 1.007 25.58 1.349 34.26 2.079 52.81 .125 3.18 .648 16.46 1.010 25.65 1.354 34.39 2.152 54.66 .130 3.30 .670 17.02 1.046 26.57 1.357 34.47 2.182 55.42 .137 3.48 .685 17.40 1.047 26.59 1.358 34.49 .138 3.51 .696 17.68 1.062 26.97 1.360 34.54 .144 3.66 .700 17.78 1.073 27.25 1.362 34.59 .160

23、 4.06 .701 17.81 1.078 27.38 1.377 34.98 FIGURE 2. Classes N and S - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 8 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless ot

24、herwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Coupling indicator line shall be color coded red. 5. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 6. Shell size 8 wil

25、l not mate with MIL-DTL-26500 connectors. 7. Phantomed configuration optional. 8. See table I for contact cavities requiring this dimension. 9. The centerline of indicated projection must be located on vertical centerline 2. FIGURE 2. Classes N and S - Continued. Provided by IHSNot for ResaleNo repr

26、oduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 9 Shell size A thread B D F 8 .562-24 UNEF-2A .394 .290 .562 10 .688-24 UNEF-2A .515 .388 .696 12 .875-20 UNEF-2A .685 .558 .875 14 .938-20 UNEF-2A .754 .627 .936 16 1.062-18 UNEF-2A .881 .772 1.062 18 1.188-18 UNEF-2A .

27、987 .860 1.187 20 1.312-18 UNEF-2A 1.112 .985 1.312 22 1.438-18 UNEF-2A 1.237 1.110 1.437 24 1.562-18 UNEF-2A 1.362 1.235 1.562 Shell size C G M thread 8 .418 .413 .137 .097 .625-25 UN-2A 10 .535 .530 .750-20 UNEF-2A 12 .705 .700 .938-20 UNEF-2A 14 .774 .769 1.000-20 UNEF-2A 16 .901 .896 1.125-18 UN

28、EF-2A 18 1.007 1.002 1.250-18 UNEF-2A 20 1.132 1.127 1.375-18 UNEF-2A 22 1.257 1.252 .148 .128 1.500-18 UNEF-2A 24 1.382 1.377 .168 .128 1.625-18 UNEF-2A FIGURE 3. Dimensions and configurations. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL

29、-83723/84F 10 Shell size N P R T 8 .670 .980 .949 1.078 1.047 .076 .071 10 .796 1.104 1.073 1.192 1.161 .089 .084 12 .984 1.291 1.260 1.380 1.349 14 1.046 1.391 1.360 1.561 1.485 16 1.171 1.516 1.485 1.641 1.610 18 1.296 1.641 1.610 1.766 1.735 20 1.482 1.766 1.735 1.954 1.923 22 1.609 1.954 1.923 2

30、.078 2.047 24 1.732 2.079 2.084 2.182 2.152 Shell size S +.005 / -.000 W CC min DD 8 .490 12 .443 .991 10 .636 15 .443 1.107 12 .806 21 .482 1.295 14 .875 24 .596 1.357 16 1.002 30 .622 1.482 18 1.108 33 .646 1.607 20 1.233 36 .648 1.795 22 1.358 39 .701 1.920 24 1.483 42 .726 2.045 FIGURE 3. Dimens

31、ions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 11 Shell size EE FF JJ 8 .605 .635 .596 .590 10 .730 .760 .721 .715 12 .917 .947 .908 .902 14 .980 1.010 .971 .965 16 1.105 1.135 1.096 1.090 18 1.

32、229 1.260 1.220 1.214 20 1.354 1.385 1.345 1.339 22 1.479 1.510 1.470 1.464 24 1.604 1.635 1.595 1.589 FIGURE 3. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 12 NOTES: 1. Dimensions are

33、in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Coupling indicator line shall be color coded red. 5. Rear accessory interchangeabil

34、ity dimensions shall be in accordance with MIL-DTL-83723. 6. Shell size 8 will not mate with MIL-DTL-26500 connectors. 7. Phantomed configuration optional. 8. See table I for contact cavities requiring this dimension. 9. The centerline of indicated projection must be located on vertical centerline 2

35、. FIGURE 3. Dimensions and configurations - Continued. REQUIREMENTS: Dimensions and configurations: See figures 1 and 3 for classes A, G, K, M, R, T, W and Z. See figures 2 and 3 for classes N and S. This connector mates with MIL-DTL-83723/87, MIL-DTL-83723/92, MIL-DTL-83723/96 and MIL-C-83723/98. I

36、nsert arrangements and polarizing positions: See MIL-STD-1554 and table I. TABLE I. Insert arrangements requiring reduced diameter for lead-in chamfers on outer row of contact cavities as indicated. Shell size Insert arrangements Contact cavities 8 10 03, 98 06 1, 2, 3 1, 2, 3, 4, 5, 6 O-ring: See M

37、IL-DTL-83723. Part or Identifying Number (PIN) example: M83723/ 84 W 22 55 N Military designation Specification sheet number Class Shell size Insert arrangement Polarizing position Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/84F 13

38、Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-STD-1554 MIL-C-83723/98 MIL-DTL-26500

39、 MIL-DTL-83723/87 MIL-DTL-83723/92 MIL-DTL-83723/96 MS3186 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2008-164) DLA - CC Review activities: Army - AR, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested

40、in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-