DLA MIL-F-36043 D-1992 FIRST AID KIT EYE DRESSING [Use In Lieu Of DLA MIL-F-0036043 A]《眼包扎急救箱》.pdf

1、.- MIL-F-36043D 65 M 9999906 0534433 T M I INCH-POUND I MIL-F-36043D 22 June 1992 SUPERSEDING MIL-F-36043C 12 December 1978 MILITARY SPECIFICATION FIRST AID KIT, EYE DRESSING This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This

2、 specification covers a first aid kit suitable for treatment of eye injuries. 2 APPLICABLE DOCUMENTS 2.1 - Government Documents. 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless

3、otherwise specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). Beneficial comments (recommendations, additions, deletions) and any pertinent

4、 data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Directorate of Medical Materiel, DPSC-MST, 2800 South 20th Street, Philadelphia, PA 19101, by using the self- addressed Standardization Document Improvement Proposal (DD Form 1426) appearin

5、g at the end of this document or by letter. AMSC N/A FSC 6545 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-36043D SPECIFICATIONS FEDERAL L-P-378 CCC-G-101 PPP-

6、B-566 PPP-B-585 PPP-B-601 PPP-B-621 PPP-B-636 PPP-B-67 6 MILITARY MIL-L-10547 MIL-S-36586 STANDARDS FEDERAL FED-STD-595 MILITARY MIL-STD-105 MIL-STD-129 MIL-STD-794 - Plastic Film, (Polyethylene Thin - Gauze, Absorbent. - Boxes, Folding, Paperboard. - Boxes, Wood, Wirebound. - Boxes, Wood, Cleated-P

7、lywood. - Boxes, Wood, Nailed and Lock- - Boxes, Fiberboard. - Boxes, Setup. Gage) Corner. - Liners, Case, and Sheet, Overwrap; Water-Vaporproof or Waterproof Flexible. - Sterilization Test Strip Set, Bacterial Spore. - Colors. - Sampling Procedures and Tables for Inspection by Attributes. - Marking

8、 for Shipment and Storage. - Procedures for Packaging Parts and Equipment. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* 1 MIL-F-36043D 65 9979906 0534435 3 m MIL-F- 3 6 O 4 3 D 0 2.1.2 Other Government documents, drawinas, and oublications. Th

9、e following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DRAWING Defense Personnel Support Center (DPSC) 24211 - Bag, First Aid Kit, Eye Dressing (Copies

10、 of specifications, standards and drawing required by contractor in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) 2.2 Order of orecedence. In the event of a conflict between the text of this document and the

11、references cited herein (except for related associated detail specifications, specification sheets, or MS standards), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMEN

12、TS 3.1 End Item. The first aid kit shall be an assembly of components to facilitate four complete eye dressings with instructions contained in a sealed reclosable polyethylene bag. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-36043D 3.1.1

13、ComDonent Darts. Table I details the components . required for each eye dressing first aid kit. TABLE 1. First aid kit contents. End Item Eye Dressing, First Aid Kit 3.2 Materials. Required Component Number Package containing: 2 Individually wrapped eye pads (sterile) 4 Strips of adhesive tape 8 inc

14、hes long by one inch wide. Ophthalmic ointment Reclosable Polyethylene Instruction Sheet bag 2 2 1 1 3.2.1 Camouflased Eve pad. Camouflaged eye pad shall be 2 - +1/16 inches in diameter and shall be composed of a filler of a suitable quantity (approximately 0.8 gram) of USP grade absorbent cotton, c

15、overed top and bottom with single thicknesses of type 1, 44-36 gauze, camouflaged, in accordance with the requirement of Specification CCC-G-101. The camouflaged eye pad shall be free from loose threads and ravelings. The finished color of the camouflaged eye pad shall be brown. Shall approximate Co

16、lor 30219 or Color number 30324 of FED-STD-595. 3.2.2 Adhesive tape. The adhesive tape shall be clear, hyporeactive, porous, conforming, plastic surgical tape having nominal dimensions of 1 +1/16 inch wide by 8 +1/8 inches long. Eight (8) adhesive strips shall be placed on an easy-to-separate backin

17、g material. The backing material shall be split or tabbed to facilitate separation of the backing from the tape. Each piece of adhesive tape and backing shall be joined by perforation, cutting or rouletting so that individual adhesive . tape strips may be easily pulled apart from the adjoining strip

18、. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* MIL-F-36043D 65 9999906 U534437 7 MIL-F-3 604 3 D 3.2.3 Sulfacetamide sodium oDhthalmic ointment, USP, lo%, 1/8 oz. (3.5 Gm). Shall be NSN 6505-00-982-0288. Not less than 24 months of expiration d

19、ate shall remain at time of delivery to the government. Ophthalmic ointment shall be stored in a controlled environment of 59 to 86OF while not in an assembled kit. . 3.2.4 Reclosable Dolvethvlene bas. The plastic bag used to contain the components of the kit shall be a sealed, reclosable, polyethyl

20、ene bag. Shall be fabricated from 0.004 inch clear polyethylene, conforming to L-P-378, type I, class 1, grade A, finish 2. Shall be fitted with a 3-1/8 inch reclosable, interlocking closure for easy opening and reclosing by finger pressure. Shall have a sealed overflap above the interlocking closur

21、e, which shall be readily removable by tearing. Shall be in accordance with DPSC Drawing 24211. The lot number printed on the kit container shall correlate the Sterilization Lot Number of the eye pads contained therein, see 3.4.1. Expiration date indicated on tubes of ophthalmic ointment shall be in

22、dicated on bag adjacent to ophthalmic ointment stock number as indicated in the drawing. 3.2.5 ComDonent Dolvethvlene bass. The polyethylene bags specified herein shall be made from extruded stainless ttlayflat tubingtt. inch. Minimum thickness at any point shall be not less than 0.00225 inch. Both

23、seam and closure shall be heat sealed to prevent moisture from entering or to prevent escape of fluid contents in the event of leakage: excess air shall have been excluded from the sealed bag so that bag conforms to shape of the component therein. To insure a minimum of excess material, the width of

24、 commercially available tubing shall be of a dimension which shall closely fit the individual component to be enclosed. The length of the tubing between seals shall be the minimum to contain the component. cut off. Each sealed bag containing an individual item shall be capable of passing the leakage

25、 test specified (see 4.4.1). Polyethylene shall have average wall thickness of 0.003 Excess tubing beyond the seals shall be 3.2.6 Instruction sheet. A list of components, expiration date, and instructions for use shall be printed in black ink on a white background directly on the container with Eng

26、lish on one side and French on the other. Alternately, the list of components and instructions may be printed in black ink on white paper and inserted in the container. The printing shall be in accordance with DPSC Drawing No. 24211. The contractor is responsible for adding the expiration dating of

27、the ophthalmic ointment. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-36043D 3.3 Camouflaaed Eve pad packaains. Each camouflaged eye pad (3.2.1) shall be individually packaged in an envelope fabricated of natural kraft-colored glassine or.

28、 parchment paper and sealed. The envelope shall be so constructed and sealed that sterility of the content is maintained until the envelope is opened. Individually packaged eye pads shall be sterilized by steam sterilization. specified in 4.4.2. stating that samples from each sterilizer lot have bee

29、n tested and found to be sterile, shall be submitted to the procuring activity. Eye pads shall be sterile when tested as 3.4 Certificate of sterility. A certificate of sterility, The certificate of sterility shall include: a. b. d. e. f. g* C. h. i. j. k. 1. m. Item identification. National Stock Nu

30、mber. Contract or purchase order number. Sterility lot or control number. Date of sterilization. Quantity of product in sterilizer lot. Type of sterilization (gas, radiation, dry heat, steam, etc). Form of biological indicator (i.e.? inoculated paper spore strip or carrier, inoculated product, or in

31、oculated simulated product). Test organism(s) and population density used. Test medium, incubation temperature, incubation time, and dates of tests. Number of test units. Statement that samples comply with sterility tests. Signature of head of laboratory or a designated qualified alternate, When ins

32、pection is made at destination, the certificate of sterility shall be submitted by the contractor to the Directorate of Medical Materiel, ATTN: DPSC-MQ, Defense Personnel Support Center, 2800 South 20th Street, Philadelphia, PA 19101, and a copy forwarded with each shipment to the consignee. inspect

33、ion is made at source, certificate of sterility shall be furnished to the cognizant Government Quality Assurance Representative for submission to the procuring activity. of product subjected to the same manufacturing operation and simultaneously sterilized in the same sterilizer chamber. Each steril

34、ity lot shall be traceable to the pertinent manufacturing lot(s) (see 3.2.4). When 3.4.1 Sterility lot. A sterility lot is that single quantity 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* MIL-F-36043D 65 W 9999906 0534439 O MIL-F-3 6 04 3 D 3

35、.5 Assembly of components. 3.5.1 Oxihthalmic ointment. The contractor shall remove each tube of ophthalmic ointment (3.2.3) from its cardboard carton, and insert it in a polyethylene bag as specified in 3.2.5. 3.5.2 Adhesive taDe strips and camouflased eye Dad. The contractor shall tear off a unit o

36、f 4 adhesive strips (3.2.2) insert it together with two camouflaged eye pads (3.3) in a 3 polyethylene bag and heat seal as specified in 3.2.5. 3.5.3 Pre-assembly instructions. The specified components shall be placed within the bag in such a manner as to form a flat packet. The components shall be

37、placed between the Ens1 and mil sh and French instructions so that no component shall obscure ny of the listing and instructions for use. The same guidance shall apply to using a white paper background. Care shall be taken to provide a clean environment for the purpose of staging and final assembly

38、of the first aid kits. 3.5.4 Final assembly. The contractor shall place two (2) bagged tubes of ophthalmic ointment (3.5.1), two bagged units of adhesive tape strips with camouflaged eye pads (3.5.2), and instruction sheets (3.2.6) in one reclosable plastic bag specified in 3.2.4. The contractor sha

39、ll heat seal the recloseable bag and trim excess material from the heat seal. 3.5.5 Storaae of assembled kits. The assembled first aid kits shall be stored in a controlled environment and shall not be subjected to temperatures below 40F or above 95OF for any length of time. on common carriers to the

40、 Government. This restriction does not apply to kits being shipped 3.6 Markins for identification. 3.6.1 Camouflased eye xiad. Each envelope containing the samouflaged eye pad (3.3) shall bear the sterility clause: #STERILITY IS NOT GUARANTEED IF INDIVIDUAL ENVELOPE HAS BEEN DAMAGED OR OPENED“, or s

41、imilar statement and the name or registered trademark of manufacturer. When the contractor is not the manufacturer, the contractors name shall also appear. 3.7 Workmanship. The individual components, as well as the completely assembled First Aid Kit, Eye Dressing, shall be free from defects which de

42、tract from their appearance or impair their serviceability. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-36043D 65 W 9999906 0534440 7 M MIL-F-36043D 4. 9UALITY ASSURANCE PROVISIONS. I 4.1 Responsibility for inmection. Unless otherwise spe

43、cified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapp

44、roved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.1.1 Responsibility for compliance. All items shall meet all re

45、quirements of sections 3 and 5. The inspection set forth in this specification shall become a part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of ensuring that

46、all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. inspection, as part of manufacturing operations, is an acceptable practice to ascertain conformance to requirements, however this does not authorize submission of known defective materia

47、l, either indicated or actual, nor does it commit the Government to accept defective material. by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments I request, at any time, or from time to time, during the performance of the contract

48、 and for a period of three years after delivery of the supplies to which such records relate. Except as otherwise specified in the contract or Sampling 4.1.2 Records. Records of examinations and tests performed 4.1.3 InsDection. Inspection, as used herein, is defined as both examination (such as vis

49、ual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-F-36043D 65 9999906 0534443 9 inspection level MIL-F-36043D AQL (percent defective) 4.1.4 Certificates of aualitv. C