DLA MIL-H-9859 A-1968 HANDWHEEL ORDNANCE《军火驾驶盘》.pdf

1、VIL-H-7859A 53 7977906 0099672 T MIL-H-9859A MIL-H-9859 30 March 1959 MILITARY SPECIFICATION HANDWHEELS This specification is mandatory for use by all Departments and Agencies of the Department of Defense. 1, SCOPE 1.1 Scope. This specification covers commercial hand- wheels, 3 inches in diameter or

2、 larger, designed to transmit manual power to a shaft. ing types, compositions, classes, styles and sizes: 1.2 Classification. Handwheels shall be of the follow- 1.2.1 Body. - Type I - Straight Composition A - Aluminum alloy Composition B - Copper alloy Composition C - Gray iron Composition D - Mall

3、eable iron Composition E - Nodular iron Type II - Offset Composition A - Aluminum alloy Composition B - Copper alloy Composition C - Gray iron Composition D - Malleable iron Composition E - Nodular iron 1.2.2 Body hub bore: Class 1 - Without keyway Class 2 - With keyway FSC 5340 Licensed by Informat

4、ion Handling ServicesMIL-H-9859A 53 = 9999906 0099b73 1 MIL-H-9859A 1.2.3 Handle Style 1 - Without handle Style 2 - With solid handle Composition F - Aluminum alloy Composition G - Naval brass Composition H - Steel Style 3 - With revolving handle 1.2.4 Size. Handwheels shall be classified according

5、to size by tlTut minimum thickness of spokes shall be 1/4 the rim thickness and minimum width of spokes shall be 1/2 the rim thickness, 3.2.2 Hand rotation. Revolving handles for style 3 3.2.3 Spokes. Spoke design of handwheels shall be at Handwheels 4 -. Licensed by Information Handling ServicesMIL

6、-H-9859A 53 W 9999906 O099676 7 W MIL-H-9859A 3.2.4 Attaching of handles. Handles for styles 2 and 3 handwheels shall b e attached so that the handles shall not loosen during service, Any posi.tive locking feature may be used to secure the handles to the handwheels. 3.2.5 Body hub bore. Unless other

7、wise specified (see Keyway dimensions shall be in accordance with MS35756. 6.2), body hub bore shall be without keyway (class 1). When s ecified (see 6.2), body hub bore shall be with keyway (class 27. 3.2.6 Handle location. Handwheel handles shall be located on the handwheel rim, as illustrated in

8、figure 1. 3.3 Dimensions and tolerances. 3.3.1 Handwheels. Dimensions and tolerances of hand- wheels shall be in accordance with figure I, tables I or II and MS21312, as applicable. Dimensions and tolerances shall apply prior to coating, except for the hub bore dimensions of anodized aluminum handwh

9、eels. 3.3.2 Concentricity. The outside diameter of the rim shall be concentric with the hub bore within 1 percent of the outside diameter of the rim, total indicator reading. The outside diameter of the hub shall be concentric with the hub bore within 3 percent of the outside diameter of the hub, to

10、tal indicator reading. 3.3.3 An ularity. The outside faces-of the rim and . hub shall be + square w th the axis of the hub within +30f. The axis of the handle shall be square with the face of the rim within +2O. 3.4 Surface roughness. Surface roughness shall be as specified ln figure 1, in accordanc

11、e with USAS B46.i. 3.5 Protective finish. 3.5.1 Anodic coating. Aluminum handwheels shall be 3.5.2 Cadmium plating. When specified (see 6.2), cad- anodized in accordance with MIL-A-8625, type II. mim plating shall b e in accordance with QQ-P-416, type II, class 3, except that the hub bore shall not

12、be plated. 3.5.3 Zinc coating. When specified (see 6.2), zinc coat- ing shall be in accordance with QQ-2-325, type II, class 3, except that the hub bore shall not be coated. 5 o Licensed by Information Handling ServicesMIL-H-9859A 3.5.4 Plastisol coating. When specified (see 6.2), plastisol coating

13、shall b e in accordance with MIL-P-20689, type II, class 1; .O78 inch f .o16 inch thick. Styles 1-and 2 shall have all surfaces coated except the hub ends and hub bore. Style 3 shall have the grip surface of the handle and all surfaces of the handwheel body coated, except the hub ends, hub bore and

14、handle boss. The coatin shall be either flush with exposed surfaces or chamfered 4!j5 I loo to the intersec- tion of exposed surfaces. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the

15、performance of all inspection require- ments as specified herein. Except as otherwise specified in the contract or order, the supplier may use his own or any other facilities suitable for the performance of the inspec- tion requirements specified herein, unless disapproved by the Government. The Gov

16、ernment reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.1.1 Quality assurance terms and definitions. Quality assurance terms and definitions used here

17、in are in accordance With MIL-STD-109. 4.2 Inspection provisions. 4.2.1 Lot. Unless otherwise specified, a lot shall consist of amandwheels of like design, produced by the same manufacturer, under essentially the same conditions and offered for acceptance at one time. 4.2.2 Sampling. 4.2.2.1 Examina

18、tion. Sampling for examination shall be in accordance with -STD-105. 4.3 Examination. Handwheels taken as specified in 4.2.2.1 shall be examined to determine compliance with the requirements of this specification. Examination shall be conducted in accordance with the following Classification of Defe

19、cts. The Acceptable Quality Levels (Aals) shall apply to the group and not to each listed characteristic. 6 Licensed by Information Handling Services_ MIL-H-757A 53 = 777770b 0077b7 O .Cat e gory Critical Major 101 102 103 104 105 106 Minor 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215

20、 216 MIL-H-9859A Classification of Defects Defect None defined AQL = 2.5 Hub: Hub: Angularity out of tolerance Handle, solid: Loose in hole Handle, revolving: Loose in hole Handle, revolving: Binds on mat- Handle stem: Threads out of tol- Bore diameter out of tolerance ing diameter erance AU = 6.5 W

21、heel: Depth out of tolerance Rim: Outside diameter out of tol- Rim: Thickness out of tolerance Spoke thickness not as specified Spoke width not as specified Hub: Outside diameter out of tol- erance Hub: Length out of tolerance Handle: erance Handle: Diameter out of tolerance Concentricity of rim wit

22、h bore, out of tolerance Surface roughness not as specified Protective finish missing or incom- plete Handwheel unbalanced Wheel has less than three spokes Angularity of rim out of tolerance Angularity of handle out of toler- erance Grip length out of tol- ance Inspmtion Method SIE * SIE Manual Manu

23、al Manual SIE SIE SIE SIE SIE SIE SIE SIE SIE SIE SIE SIE Vi sual Manual Vi sual SIE SIE * SIE - Standard Inspection Equipment protective 4.4 Testing. Tests for physical properties, i finishes and chemical compositions shall be in accordance with the applicable specification. 7 Licensed by Informati

24、on Handling ServicesMIL-H-7859A 53 W 7777706 0077b77 2 MIL-H-9859A 4.4.1 Preservation, packaging, packing and marking. Inspection and test of preservation, packaging, packing and marking shall be in accordance with MIL-P-. 4.5 Rejection and retest. Handwheels failing to meet the requirements of thi

25、s specification shall be rejected. A rejected lot may be resubmitted for Government acceptance in accordance with the provisions of MIL-STD-105. 5. PREPARATION FOR DELIVERY 5.1 Preservation and packaging. Preservation and pack- aging shall be level A, B or C as specified (see 6.2). 5.1.1 Level A. 5.

26、1.1.1 Cleaning. Handwheels shall be cleaned in accor- dance with method C-1 of MIL-P-, 5.1.1.2 Drying. Handwheels shall be dried in accordance with any applimmethod of MIL-P-116. 5.1.1.3 Preservative. Metal surfaces of handwheels not anodized, plated or coated shall be coated with type P-2 preservat

27、ive of MIL-P-116. 5.1.1.4 Unit packaging. Handwheels not anodized, plated or coated shall be wrapped with barrier material in accordance with type I, grade C, class 1 of MIL-B-121. The wrapping shall be secured with tape in accordance with type V, class 2 of PPP-T-60, Partially plated or coated hand

28、wheels shall have unplated or uncoated surfaces preserved and openings capped with tape in accordance with type V, class 2 of PPP- T-60. Handwheels shall be packaged in accordance with MIL- P-116, method I if preservative is used or method III if no preservative is used, in fiberboard boxes in accor

29、dance with grade W5C, style RSC of PPP-B-636. in accordance with the appendix of PPP-B-636. In addition, all seals and joints shall be sealed with tape, not less than two inches wide, in accordance with PPP-T-76. The boxes shall be closed 5.1.2 Level B (see 6.3). 5.1.2.1 Cleaning, drying and preserv

30、ation. Level B cleaning, drying and preservation shall b e in accordance with the requirements of Level A. be in accordance with th e requirements of Level A, except 8 5.1.2.2 Unit packaging. Level B unit packaging shall ,- Y Licensed by Information Handling ServicesMIL-H-9859A that the fiberboard b

31、ox shall be in accordance with type CF, class domestic, style RSC of PPP-B-636. Closure shall be in accordance with the appendix of PPP-B-636. aging shall be in accordance with good commercial practice. 5.1.3 Level C. Cleaning, drying, preservation and pack- 5.2 Packin . Packing shall be level A, B

32、or C as speci- fied (see 66 5.2.1 Level A. Interior packages shall be packed in overseas type containers in accordance with one of the follow- ing: PP-B-585, class 3, style 1 or 2; PPP-B-601, overseas type, style A or B; PPP-B-621, class 2, style 2 or 4; or PPP- B-591, class II, style A or B. The ma

33、ximum gross weight of each shipping container shall not exceed 70 pounds for con- tainers being shipped into combat areas or 200 pounds for - all other shipments. 5.2.2 Level B. Interior packages shall be packed in domestic type containers in accordance with one of the follow- ing: PPP-B-585, class

34、1, style 1 or 2; PPP-B-601, domestic type, style A to K; PPP-B-621, class 1, style 2; or PPP-B- 591, class I, style A or C. The maximum gross weight for shipping containers shall not exceed 200 pounds. 5.2.3 Level C. Handwheels shall be packed to insure carrier acceptance and delivery without damage

35、 to the first receiving point for immediate use. accordance with Uniform Freight Classification Rules, National Motor Freight Regulations or other common carrier regulations applicable to the mode of transportation. Containers shall be in 5.3 Marking. In accition to any special marking speci- fied i

36、n the contract or order (see 6.2), each package and shipping container shall be marked in accordance with MIL- STD-129. 6. NOTES 6.1 Intended use. Handwheels covered by this specifi- cation are intended for use in rotating shafts on materiel which have loads small enough to permit hand turning. It i

37、s intended they be attached to the end of the shaft by threaded or spring type fasteners and depend on straight or Woodruff keys for transmitting torque loads. 9 Y Licensed by Information Handling ServicesVIL-H-7857A 53 7777706 0077b1 O M 6.2 Ordering data. Procurement documents should specify the f

38、ollowing: a. b. C. d. Title, number and date of this specification. Type, com osition and si.ze of handwheel (1.2.1 Class of body hub bore (1.2.2). Style of handle and Composition of Style 2 handle and 1.2.g) (1.2.3). e. f. Protective finish (3.5). Military Standard part number, when applicable. .-

39、-,- g. packaging and packin h. Marking, if required $5.3). Selection of applicable levels of preservation, (5.1 and 5.2). 6.3 Level B preservation and packaging is intended to provide economical but limited protection, and should be speci- fied only when it is determined that the handwheels will be

40、held in covered storage approximately one year from date of initial packaging. 6.4 When warranted, the following paragraph should be included in the written contract to cover the type of quality assurance system that is desirable for this item. Contractoris quality assurance system. shall provide an

41、d maintain a quality assurance system in accor- dance with MIL-Q-9858. The contractor Custodians : Army - WC Navy - OS Air Force - 82 Reviewer activities: Amy - ME, MU Navy - None Air Force - 85 DSA - IS User activities: - Army - AT, MI Navy - MC Air Force - None Preparing activity: Project No. 5340

42、-0375 Army - WC 10 Licensed by Information Handling ServicesMIL-H-7857A 53 m 977770b 0097682 2 m aw mmno n a 11 Licensed by Information Handling ServicesMIL-H-959A 53 m 9999706 009963 4 m a, r) v) E: O *ri rA XU k,500 xz w +I NO awoo w=cr;oo xo a+ I Q) 2z 5 a d (d X 1 I- m m a O m 9 Iril rc) O +I L

43、+I I +I 12 (3 Licensed by Information Handling ServicesMILH-9859A XW h500 xz mwrl NO aawoo wsp:oo xo a+ I ia, ia3 I Nrl -a, N IW IO I m 00 WO *o rlm mo NO WO rl mm r-r- r)r) mo rl ? mo Nu, Wb NO WO om rlrl r) O +I CON cod rl CON a,rl rl mrl ur) O0 Nr) mo Nm rir- Nhl mo Nu) rlN rlrl mo r-o r)m mo Nu,

44、 drl om mr- r-00 mo NO WO rlm mm rlrl ?Y m0-l drl rlrl rlrl ma, NN r)r) ma, Ar) N* mr) ou) ON mrl TIN mu) NN WUJ mo rlN Y? ou) ON orl dd mo r-o mo Nr) a, r) rl W r) rl . a, a, rl d - m W O * - O O m rl - O O O ri - a, 00 rl - O m N rl - O u) r- N - N rl +I mm r)r) rlrl *. O0 mm rlrl coa, ma, * ? NN WW mm *=e O0 ou) NN mm NN rlrl rlrl om mN Nr) O0 om mr- rlrl O0 ou) me4 r)* . . 13 Licensed by Information Handling Services