DLA MIL-O-36788 (3)-1973 OXYGEN USP WITH TUBE AND FACE MASK 24 GAL (90 LITERS)《灯管和面罩24加仑美国药典氧气(90公升)》.pdf

1、- MIL-0-36788. (3) 65 7747706 0262675 T MIL-0-36788 Amendm n t -3 7 December 1973 SU PE RSED ING Amendment-2 11 Hay 1973 and Amendment - 1 13 February 1973 MILITARY SPECIFICATION OXYGEN, USP. WITH TURE AND FACE MASK 24 CAL. (90 Titers) This amendment forms a part of Military Specification MIL- 0-367

2、88, dated 23 August 1971, and is approved for use by all Departments and Agencies of the Department of Defense. Page 2: 3.1.1 Oxypen. Line 2, delete “of the current edition“. * 3.1.3 Valve. Line 2, delete “nickel or chrome plated,“. Page 3: 3.2 Style, design and dimensions. Line 4, delete “an in-rst

3、ate Commerce Commission and remainder of paragraph.“ and substitute “Department of Trans- portation Regulations .“ 3.2.1 Cylinder. Delete first sentence and substitute: “The cylinder for Qpe I shall be not less than 1-15/16 inches in diameter nor more than 18 inches in overall length and for Type II

4、 shall not be more than 4 inches in diameter nor more than 18 inches in overall length, and shall have a minimum wall thickness of 0.045 inch and a minimum volume of 93 cubic inches (1570 cubic centimeters) .I Line 8, delete “Tnterstate Commerce Commission“ and substitute “Department of Transportati

5、on Segulations“. Line 13, delete “4.4.3“ and substitute “4.4.2“ and add: ing stored for a period of fourteen (14) days at 150F without exhibiting any loss of oxygen content on the contents indicator.“ “The unit shall be capable of be- 3.2.2 Regulator. Delete entirely and substitute: “The regulator s

6、hall be so constructed that it can be attached to the unit without the use of tools and shall permit the flow of gas to be turned off without disconnecting the regulator from the unit. The operation of the regulator shall be con- trolled by rotating the regulator in a clockwise direction to the maxi

7、mum extent which will permit oxygen to flow at a fixed rate of 6 liters per min- ute minimum across the entire range of tank pressure. FCC 6515 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-f- MU-0-36788 3.2.3 Oxygen. Line 1, delete “90 to LOO lite

8、rs“ and substitute “a minimum ;. - .- of 90 usable liters.“ Line 2, delete iOoli and substitute 21C“. Line 4: Delete “may“ and substitute “shall“. Page 4: 3.2.4 Mask, reservoir bag, and tubing. At end of paragraph add: “Tubing shall be readily attached to mask and regulator.“ 3.4 Performance charect

9、eristics. Delete entirely and substitute: “For Type I the unit shall deliver oxygen at a constant rate of 6 liters per minute minimum at 1000 pounds nominal at 70 F for a minimum 15 minute dura- tion. For Type II the unit shall deliver oxygen at a constant rate of 6 liters per minute minimum at 1800

10、 pounds nominal at 70 F for a minimum 15 minute duration. 3.5.1 Tubing. Line 2, delete “4.4.2.1“ and substitute “4.4.3.1“. 3.5.2 Mask and reservoir bag. Line 1, delete: “4.4.2.2“ and substitute “4.4.3.2“ . 3.6 Certificates of safety (nontoxicity). Line 4, delete “3.6 and 4.4.2“ and substitute “3.5 a

11、nd 4.4.3“. 3.7 Manufacturers record. Lines 3 and 4 delete “of all tests made on nontoxic masks, reservoir bags, and tubes,“ and substitute: “so that it is possible to determine all the facts as to source, material and as to the manu- facture of such lot.“ ,-:_ _. c.: 3.8 Finish. Line 1, after “ename

12、l“ insert “or lacquer“. PaRe 5: 3.11 work mans hi. Line 1, ship Il. delete 4.1.2 Inspection. Line 2, delete 4.1.3 certificates of qual t. L comma and after “aluininum“ insert “or Page 6: “workmamshipl and substitute “workman- IlofIl and substitute “or“. ne 2 after brass delete “or“ insert fuse metal

13、,“. * 4.2.2.2 For other tests. Delete third sentence. In Table IIT add the following as indicated below: “Cylinder Perf ormance 3.4 s -1 2 . * L _ , Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_. _ MIL-0-36788 (3) 65 7797706 O262677 3 Page 7: Tab

14、le IV. Delete “Major 105 entirely“. 4.4.3.1 4.4.4 Oxygen. Second sentence delete “method“ and substitute “methods“. Delete Tubes in title and line 1 and substitute “Tubing“. Page : 5.1.3.1 Unit package. Line 4, following “reservoir bag“ insert: “and regu- lator“. Line 6, delete the word “also“. Line

15、 7, following “plastic“, delete remainder of sentence and substitute “sleeve“. Page 9: 5.2.1.1 Exterior container and 5.2.2.1 uterior container. each paragraph add: as specified in the applicable table referenced in PPP-B-636 .I At the end of “Fiberboard boxes shall conform to the special requiremen

16、ts 5.3.2 Exterior container. At end of paragraph add: “Marking shall include the legend: DO NOT EXPOSE TO TEMPERATURES ABOVE 130F. I Add the following new paragraph: “6.5 The margins of this specification are marked with an asterisk to indicate where changes (additions, modifications, corrections, d

17、eletions) from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and con- tractors are cautioned to evaluate the requirements c.f this document based on the entire content irrespective

18、 of the marginal notations and relationship to the prev- ious issue .I . Custodians: Army - i.iD Navy - $5 Air Force - 03 Review act ivi t ies : Army - MD Navy - 1.B Air Force - 03 Preparing activity: Defense Supply Agency - DM Project No; 6505-1304 Review information is current as of the date of this document, For future coordination of changes to this docunent, draft circulation should be based on the information in the current DODISS. 3 - * U. S. GOVERNMENT PRINTING OFFICG 1974-71515Oi2866 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-